Database Users

Questions about o2 active and using XDA Exec - hel please!

OK, im a O2 XDA newbie and just got an o2 exec.
I intend to use it with tom tom 5 eventually but i mainly want to use it to connect to 3g internet and making phone calls of course!
I have a couple of questions.
1) By removing the o2 active/o2 software what is the advantage? I understand it makes it run a little quicker but by how much? Will it make connecting to o2 3G / GPRS more complex as I like the simplicity at the moment.
2) Can i rempove the o2 stuff wiothout flashing as I already have a lot of emails/data that i dont want to lose on my device
3) If I do have to flash, what will I miss from the o2 software?
4) How can I change ringtones to my own MP3s etc and is it possible to assign different ring tones to different callers or groups of callers.
5) Is there any better wifi software. At the moment I find it a little tricky to swap from one wifi network to the other without turning wifi on and off and going through a lot of menus.
6) Do I need to uninstall 02 stuff to get Tom Tom 5 to work.
Any help much appreciated.
Cheers,
Roger

Anyone able to help on any of my questions? Please!
Roger

Hi,
I saw your post and decided to sign upto this forum.
i also have an XDA Exec and getting rid of the o2 menu bar doesnt realy do much at all, for starters the o2 menu bar is annoying and messy.
I have managed to unlock my fone but have only tested it with an Vodafone sim so far, leave your email and i can email you the file and instructions.
to add your own mp3 ringtones just put your mp3's on your memory card but not in a folder and to add an mp3 message tone copy the mp3 to the windows folder.
anyother questions feel free to ask.

Removing the O2 active software greatly improved the speed of my Exec. I didnt use it so I dont miss it at all, the unit is still very easy to use without it.
To remove the O2 software, you dont need to flash, jut goto start-> programs-> Install Type, and select basic, voila!
As for TomTom, I believe you need the 5.1 update - I havent tried installing TomTom yet, but it is in my todo list ;-)
Allan

If you select o2 active basic set up, it is not uninstalling it. Search the forums for the corp code, that kills it off I believe, that is what i am using and i prviously had basic on, and its now even faster!
Also - you will need to remove a file from the windows startup folder to do with o2 software, forgotten what is is killed, just hunt about..

If you uninstall the O2 software and you only use O2 e-mail, will this mean you can no longer access it using the xda? This may sound like an incredibly stupid question to those of you who are experts, but please bear with me, this phone is a very new thing for me, and I'm not keen on tinkering with the setup if I don't know what the possible outcome may be. I haven't been able to get my xda to sync to Outlook on my PC either, but I don't use Outlook for my e-mail, so at the moment that's not a major disaster.
Carol

hey CyberTiger335 !!!!
Cybertiger335 said:
I have managed to unlock my fone but have only tested it with an Vodafone sim so far, leave your email and i can email you the file and instructions.
...
anyother questions feel free to ask.
Click to expand...
Click to collapse
I have been going over this forum (have a look here: http://forum.xda-developers.com/viewtopic.php?t=30330&highlight=
) and others for quite sometime reg any word on unlocking the xda Exec, with no real result. It is essential for me as I spend much of my time overseas.
So, I would be gratefull if u could send me the data, info and instructions on unlocking the handset.
Oh and i have some foreign SIMs here in London - so I can verify with them, whether the unlocking process can work. :wink:
Thanks

My XDA from O2 came unlocked (already tried with a "3" sim) I noticed a huge speed increase by getting rid of the O2 menu bar, I did it by removing (or you could rename) \windows\startup\active.lnk and rebooting, this plus overclocking to 624 MHZ makes it run like a dream. It is so fast E.G it can fully switch from Portrait to landscape in less than 2secs. and it works every time

hard reset it and choose the corporate mode, miles quicker and so much cleaner than the o2 garbage............The codenwhen prompted for corporate mode is 0506
if it aint active syncing, have you got the latest 4.1 update? if so, check your firewall, or come off line and disable your firewall see if that helps, if not, go to microsoft and they have a page to guide you through forewall settings.
hope that helps.

Hi, I'm a Newbie but learning fast,
I have just got the Xda exec, and was really disappointed with the Personal Modes performance so I did the hard reset and used the 0506 code to install corp mode without the o2 gear and now it runs as fast as any Pda i've seen if not faster, the screen refresh rates were much better. but hey! whats a few nano secs between models eh! I think just using the Install Type option doesn't do it properly, so I'd go for a hard reset.
Anyway after hard resetting and installing the corp install, I couldn't really find much that the O2 software actually did! I didn't miss anything. I think the O2 software is one of those type of programs that free memory but actually take up as much as it reclaims, making it useless.
You can run TomTom5 with the O2 software running but to connect to most Bluetooth GPS devices You'll find it advantagous to use the 5.1 update cab files instead of using the TomTom5 cab files. The 5.1 cab update files are actually full install files for the application only, you still need the maps, voices and the essential speed camera poi. I now have the latest TomTom and up and running. excellent program and joanna lumley's voice; well, sat nav heaven.
As for WIFI I could only find this: http://www.geekzone.co.nz/content.asp?contentid=4437 I also found an interesting little program called Hitchiker.
MP3: I've found it better to convert any audio file to WMA, not mp3. wma is better compression and its native to windows. I convert all my music to wma on the computer; I think its clearer and it takes up less space. If you look in the Windows\Rings folder on your xda exec you'll find it has a wma file not an mp3. for ringtones I use the sample files used for ejay especially the sphere sounds.

O2 Exec set up from new...only for O2

THE CABS IN HERE A FOR O2 (IF SOMEONE CAN CHNGE THIS AND PUT THE UPLOADS IN WIKI AND REPLACE WITH LINK THAT WOULD BE GREAT)
Ok so I bought an XDa Exec.. and like most thought it was going to be great when in truth it sucked..
With the help of all those on here (far to many to mention I now have by far the fastest most stable pDA I have ever had) This got me to thinking that to have all the info and files in one place would maybe help other O2 users so here goes..
What to do..
Firstly If your device has already been running then Hard reset and perform vanilla install.
Press the two -- keys on the keyboard at the same time and reset (yes that the one to the left of the red phone button and the one to the right of the green phone button)
once set up begins go through the screen set up and the device will give you a three second warning when this appears soft reset.
when it boots up you now have vanila install. ie its running but without all the O2 crap but also without your settings.
Next you need to get certain files.
UNI_ext_rom unlocker frem here http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
regedit (trial here) http://www.pocketgear.com/software_detail.asp?id=17108
O2 connections only cab at bottom of post
This extended Rom at bottom of post
Pocket Mechanic: Download (www.antontomov.com) and install this essential app. You have a few days on trial, and it's necessary for some steps
Ok now using active sync connect to your device and place the following in my documents (anywhere realy I just find I remember that)
*UNI_ext_rom unlocker
*regedit
*O2 connections only cab
*Pocket Mechanic
run both before resetting and also open regedit and change the following
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:00000002
"Order"=dword:00000001
"LoadFlags"=dword:00000001
"DriverPath"="Drivers\\BuiltIn\\TrueFFS_G31"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="Extended_ROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"
RESTART EXEC.
ONCE RESTARTED CONNECT VIA ACTIVE SYNC
you should now be able to see and edit the extended rom. delete all files then unzip the extended rom you downloaded from here and copy all the files across into the folder.
Now hard reset the device
This time allow the extended rom to install ie do not stop at the 3 seconds bit.
NOW browse to my documents and run pocket mechanic.
then run O2 connections only cab
this will then ask you to choose installation choose the bottom one and it will restart your device.
now browse to programs pocket mechanic and follow below
Notification Queue: This can be done later, but it's nice to get familiar with this process whilst your queue is small. Using PM, open the notification queue. You may already (yes!) find some duplicate (yellow icon) sddeamon entries. These seem to replicate during an ActiveSync. You can/must delete all duplicates from time to time. You will also, in future, find some "\.\\Notification.....SCRIPT..." entries. Keep an eye out for these. Most mature within minutes of you finding them, so let them expire. Many are future-dated and tightly back-to-back. These can nearly always (I've never had a regret) be deleted without repercussions. If you don't manage these, they tend to breed, and anyone with XDA experience knows what happens when your queue fills up (failed alarms etc). I'm unclear as to where these come from - undoutedly an app that is not behaving elegantly (regular registration checks etc), and if you follow the steps on this post you should NOT find any - ie the apps here do not seem to be culprits. But, keep an eye open...
Registry cleanup: Again, this can be done later, however you'll soon see the beenfit of doing it now. Using PM, run registry cleaner. You'll get around 6 entries, all of which can safely be deleted. If you did not follow step 1, you may have to examine eahc entry to see if the O2 ROM is messier. The beauty of this step is that from now on, you can safely clean everything that PM finds in the knowledge that it's a leave-behind from an app you installed, and now you can install, de-install, and provided you clean up the directories (easy) you KNOW for sure that you've completely gotten rid of the failed app. Winner!
OK now you can install all the apps you need. I have copied the cab files to the storage card that way if I ever have to hard reset I have everthing, please note I also copied the O2 connections only cab to there.
WELL I am open to comments about this and must stress you do this at your own risk but hell it worked for me and I have as I said the fastest PDA I have ever had.
so over to you guys.. PLEASE note this is in no way my own work it is all thanks to other people on here but hopefully I have put it all in one place..
all comments welcome accept the one that sais Magpies a knob

Hi many people are looking
and a few downloading comments would be good..
does it work any ideas of additions into it etc etc etc

I like it, but for a new Pocket PC user such as myself. It might be hard to follow some of your instructions. But I like the idea of putting Pocket Mechanic in the ExtROM. I was considering of doing this too, but I want to add MemMaid and HandyMenu with Pocket Mechanic.
This would be a temporary use for the ExtROM for now before Buzzzzzz releases the partition hack. Then, I would rather use the ExtROM as part of my internal memory.

I think you need to WARN PEOPLE CLEARLY THAT DELETING FILES FROM ORIGINAL EXT ROM IS NOT GOOD.
And then let them make up their own mind.
I thought about doing what you posted but tbh its too much bother.
It runs OK as it is. All I use this thing for is phone, streaming radio and anime.
In corporate with no crap OEM stuff I havent tested and normal o2 ext rom it works fine.

I wanna say thanks, had some spare time todaylooking after the sick missus and carried out the procedure, dont know if its running much better than my corp install before but it was good fun and easy to follow

Dial PPC from Outlook

I have been searching the web for years trying to find the solution to what I would consider is a very simple requirement:
From Outlook on the PC, right click on a contact and dial to a connected Pocket PC via Activesync.
Now, either I am alone in this world, or my search capabilities are flawed. This is a function/capability I used to have with my old Sony-Ericsson & I am missing it badly - yes, I know there is a Powertool that provides you with a "window" to your PPC, but I have found that this is somewhat flakey, doesnt like Landscape mode and frequenly freezes the PPC.
Further, I have enhanced my Access application to perform the dialup via the CPROG.exe, what I am after is the same or similar functionality direct from Outlook... please help!
Is there anyone out there that can help me?

looking for the same
it seems we both live in the same world

Come on guys, are you really telling me there isn't anything out there at all?

err so remind me why one would want to do this other than to write some annoying dialer program?

OK, rather simple, really:
Working from Desktop PC, with PPC connected via ActiveSync and sitting in a cradle - by definition, this makes it a pain to access the PPC.
Current Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact
3. Look at number
4. Lean over desk, usually spilling coffee, or unintentionally moving to another website
5. Try to use Stylus to dial number (or use Intellidialer to access the same contact you have in Outlook)
6. Make call
7. Hope you have put in the right number
8. Call goes to voicemail, throw phone against wall
All in all, a rather cumbersome scenario.
Preferred Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact, or right click on Contact
3. Select number to dial
4. "Magical programme" sends dial request to PPC
5. Make call
6. Call answered, sale made, kids go to expensive Private School and Wife loves you forever
Makes sense now?

yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job

st3v3 said:
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
Click to expand...
Click to collapse
Did you ever read his first post?

yeah for about 4 or 5 seconds, gave pity and responded for the simple fact no one else did and thought i would show some interest.
at least some of us make an attempt eh helterskelter

Thanks for your pity, but I would prefer to know what, if anything, is out there. Obviously, I was mistaken in believing this was the font of all wisdom and exciting development in the PPC world. I truly cant believe that nobody has thought to put this together. Funnily enough, there is one that does this via Bluetooth, but as the XDA Mini wont allow multiple Bluetooth connections, I have been "forced" to find out if there is anyone clever enough to make this happen :sigh:

Hi!
I miss this funtion in windows mobile. This is the only reason why I consider to go back to my old Ericsson.
A little bit strange that it works with other software but not with Microsofts own?

Using .net you might be able to write an app (server) that listens on an open port on the PPC for coms from the active sync pc. When a certial string is sent down this port DIAL(123456789) the app calls the dial command in .net framework.
Maby its time to bite the bullet and code it.
Im having to with another app

No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).

mlk said:
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
Click to expand...
Click to collapse
Nope this can then be done using windows scripting host cause its the outlook that you need to automate not he PPC.
See the 3rd item on this page.
http://www.cooperstown.net/tips/outlook-address.html
It should be able to help you out just make a custom toolbar button in outlook to call this piece of code and your away laughing.
EDIT:
Where did you fiind the info on cprog. Is there any way it could help with this

Unfortunately, I cant remember where I found the information on Cprog - only thing I have is the "How to call a number".. tried for some time to find various parameters to no avail... not too sure if this will help with your problem.

OK Guys, I finally bit the bullet - thanks Shaun for the "hint" - and coded a Macro to perform this.
It may be a bit clunky and as a "non-developer" I don't have the requisite nous nor software to distribute this as a plugin. For this reason, I have provided this as completely open (as far as I can tell), so if anyone wants to take this further, I hope I have started you on the track and that you wont forget the initial starter!
For those of you that wish to install - you will need to access your \Documents and Settings\<username>\Application Data\Microsoft\Outlook folder and extract the zipped file. My recommendation is that you save the existing one first, just in case you have written a bunch of Macros - wouldn't want to get any nasty surprises here - remember, Outlook only has one Macro bucket and this file is it!
Once you have installed and either provided your own Digital Certificate, or have an appropriate level Security within Outlook to allow this to run, simply add the Macro "Dial2PPC.Dialit" to a toolbar both in Outlook (that comes up in Contacts preferably) and in the Contact Form itself (use "Customise" as you would in any other Office application to facilitate this).
From here, it is as simple as selecting the Contact from your contact list and clicking on the Macro button you have setup - then follow the instructions, make sure your PPC is connected & Dial away!
Please note that you will need to have installed RapiStart from the Windows Mobile Power Toys and that I make no assertions that this is bug free, so use wisely - although, I am pretty sure I have most of the bugs out.
Again, this is provided open & free, so if you make an enhancement, please share it with the rest of us!
Hope this solves the "issue" for you guys as it has done for me!

DialViaActiveSync
mlk – thanks very much for your macro. I’ve taken the liberty of rewriting quite a bit of it (everything other than the part which communicates with the device, really), and have made it available under the GPL v2.0, in order to preserve its “Free” status.
In terms of changes, as I say, I’ve rewritten most of the back-end functionality. In particular:
1.) Adding items to the listbox – this now only shows fields which have a valid phone number, so there are no empty spaces
2.) Dynamic resizing of the form
3.) Form and “Dial” button captions show the name of the contact
4.) Where a contact has no valid phone number, a dialogue to this effect is shown
5.) You need to select number from the listbox before the “Dial” button is available
6.) You can double-click on a number in the listbox to dial it
7.) General tidy-up of some of the variable names, and removed a couple of unused variables
Installing my version:
I’ve exported the relevant files from the Project, so there is no need to overwrite the existing Project file – just open Visual Basic Editor (Tools / Macro in Outlook) and select “Import” and the browse to the relevant folder.
I'm a lurker rather than a poster on here, but, any questions, please do let me know.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]

Neil,
Champion stuff mate - I have always said it is best to wait for Version 2! Just one question: The ".frx" file, what is that for?
Mark.

It's the binary file for the VB .frm - it's not something you manually import, but it's necessary for the display of the form.
BTW- I've changed the contents of the .zip file for download- realised that I'd left in a line (an extra ResetState call) which stopped the whole thing from working - new version uploaded (same name) should be fine.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]

Thanks for this, maybe should change my mantra to: Wait for V2.1?
P.S. Thanks for coming out of the lurk!

Nah- v2 was fine... if I hadn't been meddling with it...
Managed to put the reset call before the RAPI argument, which, of course, wiped out the phone number it was trying to dial... Stupid, stupid, stupid -embarrassing, but at least easy to fix.
I guess that the next step is to try and implement SMS via ActiveSync - not sure if cprog.exe handles this, though, so it could be rather more complicated...

.cab file problems on 8525

hi all,
i've been looking for an answer to this problem, and I don't like to ask seemingly redundant question, but you guys are the pros.
so here's my problem. i just got my second 8525 and am trying to install all my favorite programs,ie-ptt disable, battery meter, new today screen, but i can't get any cab files to save, transfer, open/extract to my phone. i have the 2.0 .NET framework(i think was my problem first phone) but my pc doesn't/won't recognize my phone as a viable file recipient.
Any ideas? Thank you greatly!!!

upgrade to .net 3.5...

weiky79 said:
hi all,
i've been looking for an answer to this problem, and I don't like to ask seemingly redundant question, but you guys are the pros.
so here's my problem. i just got my second 8525 and am trying to install all my favorite programs,ie-ptt disable, battery meter, new today screen, but i can't get any cab files to save, transfer, open/extract to my phone. i have the 2.0 .NET framework(i think was my problem first phone) but my pc doesn't/won't recognize my phone as a viable file recipient.
Any ideas? Thank you greatly!!!
Click to expand...
Click to collapse
Well yes you can upgrade the .net framework. But I wonder if you are trying to extract the cab files before transfering them to the phone?
Just use activesync explore mode to transfer the cab files (unextracted) to the phone or sd card and then on the phone use file explorer to find them and tap on them.
Things that run all the time and on today screen install to main memory, all the rest install to sdcard (choice appears when you tap on the cab file)
Mike

ok.....i'm going to upgrade to 3.5 but one question still remains. When I try to save .zip/.cab files from the net it only allows me to save to my pc, NOT my phone. in fact, there isn't even an option to save to phone. SO, i thought it would be fine to save to pc then transfer these files to my phone afterwards. NOPE! it's crazy, but my vaio pc doesn't even recognize my phone period. only activesync sees my phone. so, what would be the cause of this file transfer problem?

weiky79 said:
ok.....i'm going to upgrade to 3.5 but one question still remains. When I try to save .zip/.cab files from the net it only allows me to save to my pc, NOT my phone. in fact, there isn't even an option to save to phone. SO, i thought it would be fine to save to pc then transfer these files to my phone afterwards. NOPE! it's crazy, but my vaio pc doesn't even recognize my phone period. only activesync sees my phone. so, what would be the cause of this file transfer problem?
Click to expand...
Click to collapse
Save the cab file on your pc, go into activesync and select explore......then drag and drop the file onto the explore window. Simple

well, i dL the 3.5 .NET framework. no problems there, but my original problem still exists. I can't open any files to my 8525. when i try to copy or send from pc to phone, my phone isn't even recognized. when i explore my phone and try to push a file through, it doesn't work. This is probably some ridiculous formality, but I can't figure it out! It's starting to really irritate me now
-Weiky79

wow...I feel like a moron. i looked and looked for the answer and finally found it. i googled it, and saw on 2 different sites that there's a box that needs to be unchecked in the usb to pc button under the connections menu. the button is the 'enable network functionality' that needs to be unchecked. i still have intermittent problems installing programs on here, activesync randomly recognizes my phone now, but at least now I'm getting programs installed. Hope this helps everyone

weiky79 said:
wow...I feel like a moron. i looked and looked for the answer and finally found it. i googled it, and saw on 2 different sites that there's a box that needs to be unchecked in the usb to pc button under the connections menu. the button is the 'enable network functionality' that needs to be unchecked. i still have intermittent problems installing programs on here, activesync randomly recognizes my phone now, but at least now I'm getting programs installed. Hope this helps everyone
Click to expand...
Click to collapse
Agh right - I see what the problem was now - I think we were slightly misunderstanding the problem.
Good news - happy days
Mike

Need a HTC mentor...

Hi,
I just bought a HTC HD2 (Leo). I've looked around in all the forums and can't find the info I'm looking for plus all the answers to all the other questions I have.
My first question is, how can I save directly to the SD card instead of the phone memory? I've looked everywhere to find an answer to that and I've even contacted the HTC support (in Sweden) but no luck. Does anybody know? Is it possible? I have a ton more questions, but I can only ask one at a time, if i understood the rules correctly.....

Sorry, but what are you trying to save, an example may help. Usually you are asked where you want to save something. Also treat yourself to Resco Explorer at some point. Makes working with files so much easier.

For example, when I send files from my old phone (photos, music etc.) it just saves it on the phone memory. It fills up my phone completely and at once. I had to move the files to the SD memory but everything didn't fit on the phonememory. I don't get any question where I want to save my files. Is there any way (that someone knows about) where I can change that? And thanks for the tip about the download, I will check that out! And I can't whatch divx movies on my phone - any tips?

Hmmm, see I used Windows Media Player to sync music and photos and it gave me the option where to sync to. I guess the problem is if you are going direct from Phone to phone you aren't getting the same level of configuration.
I believe Coreplayer is for DivX.
Free DivX layer here

Thank you for the link!! Been looking for that one. Since I'm new to windowsphones, do you know of any link (tutorial) where I can learn how to install coreplayer (and other apps - like flash and others)?

Things will either come as Install packages that are run from your PC while the device is connected via Activesync or WMDC. Alternatively applications are downloaded as .cab files which you stick somewhere on your storage card and run them from within File Explorer.

Thank you for helping a novice out! I'm gonna try it out!