Hi to all,
i've been using my jasjar for 3 months and yesterday speaker&mic stopped...
i can hear only ringtone... i tried hard reset & upgrading to the new wwe rom without luck...
if i use my jabra bt headset it works ok...
it simply stopped to work for both speaker and mic without any crash or so on...
anyone with the same problem? what i have to do right now? return to the seller?
thanks in advance...
--
matteo
Related
Hi,
Can anybody out there advise me on what I need to do to get this blue trek G2 headset working properly with my XDA2 ?
It has paired OK with the XDA, I can hear fine from the headset but the mic is not responding to voice input.
I don't think it is a hardware issue with the headset, I paired it with a Nokia 6630 and it worked perfectly.
Is it a problem with the software I'm running in the XDA ? I'm running 2.02t1 WWE, 1.18.00
Any suggestions ?
Thanks
got a G2 running on my QTEK2020 with rom 2.20CHS.
works perfect.
can also use dial last number direct from the G2 by pressing the key for 2 seconds.
really works like a charm
MJW said:
Hi,
Can anybody out there advise me on what I need to do to get this blue trek G2 headset working properly with my XDA2 ?
It has paired OK with the XDA, I can hear fine from the headset but the mic is not responding to voice input.
I don't think it is a hardware issue with the headset, I paired it with a Nokia 6630 and it worked perfectly.
Is it a problem with the software I'm running in the XDA ? I'm running 2.02t1 WWE, 1.18.00
Any suggestions ?
Thanks
Click to expand...
Click to collapse
sounds like you are using handsfree mode?
For my G2, i couldn't get the mic working as well. Seems the mic only works for headset mode.
I must be being stupid !! I cannot get this this thing to respond to voice. It connects the to the XDA perfectly, the last number redial works a treat, the headset icon appears next to signal strength indicator, I can hear through it fine, just nobody can hear me. I've checked the mute function that works fine and isn't enabled. I've hard reset the XDA, rediscovered the G2 but still no voice. Any f urther suggestions ?
MJW said:
I must be being stupid !! I cannot get this this thing to respond to voice. It connects the to the XDA perfectly, the last number redial works a treat, the headset icon appears next to signal strength indicator, I can hear through it fine, just nobody can hear me. I've checked the mute function that works fine and isn't enabled. I've hard reset the XDA, rediscovered the G2 but still no voice. Any f urther suggestions ?
Click to expand...
Click to collapse
The G2 is working properly??? Have you tried it with other phones? Perhaps it has the problem...
I have the G2 as well and it works fine with the 2020...
I am convinced the G2 is working correctly, it works fine with another BT device. Do I need to upgrade my XDA2 to 2.20 CHS ??? or is there a registry tweak I need to make within 2.02t1 WWE ? to get the G2 to work ? If so where can I find it on the forum ?
MJW
Hi guys !
I tried to check the forum for this problem but I only could find something scarcely useful.
My Qtek 2020 has the microphone which seems to be completely dead during a phone call. The recorder works fine, as well as the speaker. I can only get a regular operation with a BT headset. The external (wired) headphone is still dead but only regarding the microphone.
I' ve been reading some posts about the phone connector: do you think I should open the phone and check for that or what else ?
Any suggestion is greatly appreciated.
Thanks everybody in advance. Oberdorfer.
dead mic in phone mode
Yes, I have XDAII, I have exactly the same problem as oberdorfer.
The mic is working fine in recorder. But not in phone mode.
I have tried replacing the mic, but no luck.
I tried searching thru the forum, but nothing. Anyone can help?
I've noticed, that there are several threads about the Bluetooth communication of the magician. Therefor this one will be one of them.
I'm using TomTom Navigator 5 with Bluetooth GPS on my device. Also i have a bluetooth Handsfree kit from THB mounted in my car. Now, allt that i want is to here the output of the tomtom via my handsfree kit. But it didn't work. All sound is coming of the built in speaker.
If I get al call, the handsfree is working fine. So this is not a problem..... :-(
Anyone got a similar constelation and got a solution for me. I've already contacted TomTom and THB, and both told me to contact the manufactor of the magician. So i think that is a Bluetooth stck problem. I'm still using the default Bluetoot stack of the magician. Will any other help me to find a solution?
Th ROM I'm using is a german 1.12......
Stefan
LumpiStefan said:
I've noticed, that there are several threads about the Bluetooth communication of the magician. Therefor this one will be one of them.
I'm using TomTom Navigator 5 with Bluetooth GPS on my device. Also i have a bluetooth Handsfree kit from THB mounted in my car. Now, allt that i want is to here the output of the tomtom via my handsfree kit. But it didn't work. All sound is coming of the built in speaker.
If I get al call, the handsfree is working fine. So this is not a problem..... :-(
Anyone got a similar constelation and got a solution for me. I've already contacted TomTom and THB, and both told me to contact the manufactor of the magician. So i think that is a Bluetooth stck problem. I'm still using the default Bluetoot stack of the magician. Will any other help me to find a solution?
Th ROM I'm using is a german 1.12......
Stefan
Click to expand...
Click to collapse
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Joost39 said:
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Click to expand...
Click to collapse
For me that would be no problem, cause i have a fixed telephone in my car, that i can use for phone calls. ;-)
But the sound of the magician speaker is very low.
I´m loving loud music in my car, and then i won´t hear any instructions out of the Magician speaker.....
Stefan
LumpiStefan said:
Joost39 said:
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Click to expand...
Click to collapse
For me that would be no problem, cause i have a fixed telephone in my car, that i can use for phone calls. ;-)
But the sound of the magician speaker is very low.
I´m loving loud music in my car, and then i won´t hear any instructions out of the Magician speaker.....
Stefan
Click to expand...
Click to collapse
Okay!
But then you have to go to an mobilephone technician who can fix it so that your PDA can connect to the carstereo with af muting device ----- you get the music and it mutes when the navigationvoice comes on.
I know that it can be done, but it cost bucks....or Euros!
Or buy another bluetooth driver that supports MP3 se www.handago.com
then you can get the navigation and musik in the headset!
Hello.
After i install an BT Headset from an freend i can't make phone calls without this Headset. The Speaker of my XDA mini does not work by calling. Ringing and all other Audio funktions are O.K., but by calling the speaker is death. BT Handset or Handsfree calling are ok.
Any one a Idea how to solve this problem?
Hi Dark Angel,
Have you solved the problem? I have similar problem. Can you help?
Hello leszazous.
Yes, i have solved the problem...
Download and instal this BT Stack: http://forum.xda-developers.com/viewtopic.php?t=33532
Reboot your PDA and be happy...
Hi Dark Angel,
Thanks for you info. I downloaded the BT Stack and installed it on my O2 Atom. Unfortunately, it crashed my Atom and forced me to hard reset my Atom.
But, the problem with the headset gone away! :wink:
Just gone thru the painful restoring process now. Though, the problem is solved anyway.
Hi leszazous
I'm so sorry to read, that your Data is going away...
Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).