hi everyone!
i've seen the same post ealier (~4 weeks ago) but don't found decision in there. So asking for again if somebody already found it.
Problem:
I use JAM as a GPRS modem via bluetooth. After voice call receiving JAM close both bluetooth and GPRS connection. So to contnue my work i have to reconnect manually from laptop
Before JAM i've used different phones by SonyEricsson (from T39) for over 4 years and hadnt never meet with this problem.
I've tried to find somethin that may help to decide this prob in GPRS and bluetooth settings of JAM but nothing
and one more questions:
is any software instead of standart WModem, witch always on and ready to connection without any manual operations like starting Wmodem. Soft making my JAM featured as any simple _ordinary_ phone like SE T610 for example?
thanx in advance for your answers (and sorry for bad english
Hello everybody,
i just replaced my old MDA 2 with a MDA COMPACT.
I noticed that close to signal level the GPRS icon (squared G) is always on, while in the MDA 2 it was on for only a few seconds after switching on radio (telephone function) and then disappeaed.
Is this normal? I do not use often GPRS function and i was told GPRS makes battery go down faster...
How can i switch GPRS function off in MDA compact?
Thanks in advance
dNuOs said:
Hello everybody,
i just replaced my old MDA 2 with a MDA COMPACT.
I noticed that close to signal level the GPRS icon (squared G) is always on, while in the MDA 2 it was on for only a few seconds after switching on radio (telephone function) and then disappeaed.
Is this normal? I do not use often GPRS function and i was told GPRS makes battery go down faster...
How can i switch GPRS function off in MDA compact?
Thanks in advance
Click to expand...
Click to collapse
It just shows that you are in a GPRS capable zone, the icon will change when you actually connect GPRS like when you connect the MDA compact to the computer. You can disconnect from GPRS by holding the hang up button for 3 seconds.
walshie
thanks for your quick reply.
I assume then, that the G signal icon was used in a different way by MDA 2 because i never saw it (same provider Voda ita) except when switching on the phone.
I shouldn't been worried then about battery life?
thanks
dNuOs said:
walshie
thanks for your quick reply.
I assume then, that the G signal icon was used in a different way by MDA 2 because i never saw it (same provider Voda ita) except when switching on the phone.
I shouldn't been worried then about battery life?
thanks
Click to expand...
Click to collapse
nah nothing to worry about, its just an indication that you are in a GPRS zone, from memory the XdaIIs shows this icon when you click on the signal strength icon, i think HTC moved it from the signal strength window because the screen on the xda ii mini is not as big and cannot fit as much information as the IIs can.
Hi,
I've just upgraded my O2 Xda II mini to the latest ROM (1.11) and found a problem.
Previously, I could end a GPRS session by tapping on the icon at the top and then clicking on the "Disconnect" button in the dialog bubble.
On the latest ROM, the "Disconnect" button has gone from the dialog bubble. It's simply not there any more.
I called the O2 Helpdesk and they have not had any other reports of this, and simply told me to hold the red "end call" button. While this works, it also backs me out of application I have open and active, which is a nuisance.
Does anyone else have this problem?
Yes you are right my MDA Compact came with the latest rom from factory and I was wondering why there is no disconnect button...? now I can see that it's common problem in 1.11 made by some mistake or something.
I guess they remove it because of the "GPRS connection problem" as I used to have problem on GPRS re-connection (after disconnected), however, after upgrade to 1.11, the problem no longer exist !
Thanks for your responses, Shamus and waiting4u.
I posted a message on the Mtek forum in Australia and one user there has the latest ROM and does not have this problem. Maybe it only happens to upgraded minis as opposed to new ones that came with 1.11?
Would really like this back. O2 support was no help and didn't even know it was a problem.
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
shamus said:
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
Click to expand...
Click to collapse
Hi Shamus,
In that case, it must be a stupid Microsoft oversight. I checked my colleague's Xda mini this morning - he is still running 1.03 ROM, and he does have the disconnect button. Very frustrating. :evil:
this little fine proggy finally makes me happy
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
Thanks Shamus! Will give it a try.
PeterW said:
Thanks Shamus! Will give it a try.
Click to expand...
Click to collapse
Yes, it works well and gives me back the Disconnect button. Thanks again.
No problem
Got a german MDA pro to Ukraine. Tried standard procedure / local GSM operator- UMC/ of GPRS setting - didn't work, althoug for Qtek 9090 it did! Then flashed device to jasjar - same result.
Any ideas? :roll:
Hi
I have the MDA PRO T-Mobile Sim-lock and I use the PDA without usim card.
After 3 or 4 days the MDA have problem and when push power the PDA no switch. After to test to switch the PDA by the hard-reset I switch the Mda but days to days the problem is great. This problem is much frequent.
Much time the screen change color and is blank and after no function and in this situation i make soft-reset.
When I have problem for to switch if put the pda in charge no function it's blocked.
Actually i have configuration original (Ger) and I haven't ExtRom. It's possible that MDA PRO have the problem because sim-locked?
It' the problem of ROM, are the bug?
Thank for help and sorry for my bad english.