Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
ssarl said:
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
Click to expand...
Click to collapse
I have done the pairing twice already. No, i dont get a prompt that the device supports Serial Port Profile.
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
rob_van_triet said:
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
Click to expand...
Click to collapse
On the outgoing port, which com should i add?
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
rob_van_triet said:
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
Click to expand...
Click to collapse
I have done what you've describe, without installing the GPS SW (destinator) second. Do you think this is the case.
I can never match the com ports i use on the outgoing port and on the Navigaton software. The ports cant be the same...
It seems that i cant select any com ports on the outgoing port except from port0 and port8.
If i select one of those 2, i dont see them in Destinator's GPS settings tab.
Just used a hex editor to change the port manualy in Destinator.ini and it worked like charm !
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
same problem here with TT5
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
Me too have had the universal for a week now tried reg hacks utils etc cant get it to use com 0 4 8 evean if enable wm2005 GPS to remap ports ...
same port with bluetooth com ports for syncing
I have encountered the same problem as u, but while trying to get bluetooth connection to sync with PC... so far no luck...
I know the trick is to select COM5 for the Outgoing Port in your GPS, and then, somehow, make TT5 show the COM5. In order to do that, some hacking must be done at the registry which I have no idea how to do that.
BT GPS with another GPS software
Hi,
Anyone using TomTom5 with BT Gps Have tried another gps software?
Close TomTom and tried to connect to the new software serial port and sucedd?
Let me know how you have done.
Regards
JoseF
Hello,
I have installed Via Virtual Earth on my K-Jam and trying to use it with my GPS (GlobalSat 338) but the GPS function doesn't recognise the GPS.
Has anyone got it to work yet ?
Thank you
http://www.viavirtualearth.com/vve/Gallery/VEMobile.ashx
On their web site it says "Use the GPS control panel on the Pocket PC to specify which COM port the GPS device is connected to."
I think I will deffinbatly try this when I get mine next week.
Ya tried that...I have it on COM6 and still not working.
Let me know if you get anywhere.
Thanks
Still no solution for this problem?
Has anybody managed to get SiRFInstantFix (or any other functionality) within SiRFDemoPPC working?
Although the application runs on my TyTN connected via bluetooth to my GlobalSat BT-338 mouse, the comm port will not connect up.
I have tried using the ExternalGPS configuration settings within WM6, but that doesn't help. Does anybody have any suggestions please?
Fransomgate GPS works...
Hello,
Is it possible tot use the diamond as GPS Reciever for the PC?
I want to use it for my sailingboat, for navigation with my laptop.
Thanks in advanced.
Greeting,
Mark
Yes it is, use GPS2BLUE, an app to use your phone as external gps receiver, in bluetooth or through activesync.
http://users.skynet.be/hofinger/GPS2Blue.html