Have a "pain-in-the-ass problem"
I´m trying to establish a bluetooth connection between my 9100 and Garmin Gps 10. I find the gps when i´m searching and adding it to my device. But the symbol is a quetionmark and when I enter the garmin software it can´t find the gps device.
Another thing is how do I get my maps into the storage card?
Please if someone know..
Hi I got the same problem with a MDA-Compact (QTek S100) and the Garmin GPS-10 Deluxe.
First I got the ROM 1.12.00, with this ROM I couldn't give the com port 5 to the gps-mouse, but I saw in QUE-soft the tab connection where I can tell how the connection is made and I saw the detail map....
Than I updated the ROM to ver 1.13.00, now the bluetooth wizard asked me to take com port 5, but now the connection tab in the QUE-soft is gone I can't see the detail map.....
WHY HAVE I SOLD MY IQUE 3600 :x
ok, talked directly with Garmin about their products, and they said that GPS 10 is not compitable with WM5 yet.. they will come with an update that shold solve the problem but they don´t know when it willbe out....
Related
Hi there!
I've recently got a M500 and I have a cellink BTG-7000 Bluetooth GPS Reciever.
I can pair the M500 & Reciever but when I go into the Tom Tom Navigator it does not find the Reciever when I go to Preferences. (there are com ports there but no matter what port I select it doesnt find it)
Any ideas why?
Hi,
I had simular probs. after pairing with another BT device. Just paired with the GPS & all was fine, so
- make sure the GPS is the last paired device
- create a com port for the GPS
- try upgrading radio
- get another BT stack
I'm having the stack from here http://forum.xda-developers.com/viewtopic.php?t=33532 but can't say it solved it or not. But it works & I can use the BT GPS & a BT earpiece at the same time.
Good luck, M
How do I create a com port for the GPS? I dont seem to have that option.
My BT stack asks me whether to create a com port for it when I pair with my GPS. Also under the BT connection settings I've got a tab which read 'COM ports'.
Cheers, M
Mine doesn't have any of these options, strange?!
I guess thats the problem, it seems my M500 doesnt let you manually assign a port.
Any ideas on a fix then?
I am on radio 1.12 & got those options from radio 1.11 on. You can try the updated BT stack from the thread 'O2 mini new BT stock'
Maybe that helP as well, otherwise upgrade your radio.
Cheers, M
Take the wired gps, baudrate 9600 en after that test some comports. It takes a while when TT detects the receiver, so hold on a bit. Most of the time it is comport 4 or 5.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
I initially had the same problem with my BT GPS device and tomtom 5.0, but pairing them just before loading up tomtom and setting it to COM 5 and then waiting a while seemed to solve it!
Good luck!
Got-it!
Duh!
I must have missed something here, so I'm posting this for the few people who are thicker than I must be;-
When setting the BT com port under 'Bluetooth settings', the outgoing com port selection window is blank.
HOWEVER, choose 'settings>system>bluetooth setting' and voila!, that is where you see that COM5 is pre-chosen. (Why there needs to be a double-entry is another matter?)
Hope this saves someone some time.
Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).
hi
i have the latest rom for my xda but i cannot get my bluetooth gps receiver to be seen , it will bond but it does not seem to find the com port , i have a holux 236 and i am running gps viewer:confused which scans the com ports , it used to find it but since a reboot it will no longer do so.
i have tried wm5gpsfix but it seemed not to do anything.
anyone any ideas
cheers
martin bell
[email protected]
I had the same problem but with WM 2003. Instalation of Widcomm Bluetooth Stack maked my GPS receiver visible for TomTom application. try that!
hi guys
need a little help please
i cant get my gps working on my O2 mini s. ive got tt5 and it works but no gps via bluetooth.
i can get it to work on my xda ii and on a ipaq h4100 but i have now sold them........
i just cant get it to pick up the gps!......i have added the bt-gps to the partnership group and added it as com6 (as i did on the other two) but i cant see com6 in the tt configure list. also i am unable to pair the gps as this option isnt available on the mini s.....
any help would be most appreciated.......im going bold
regards
jav
ive tried using the software that reconfigured the coms port in the register but that still hasn’t work.
software i used was GPSCOM, downloaded from here......
any ideas? has anyone got tt5 working on the mini s? am in posting in the right area?
Which version TTN5.0 or TTN5.21?
You will not get BT working with 5.0 without file swapping.
You need 5.21 minimum to configure GPS on a WM5 device. But be aware "older" maps may not run on 5.21.
Run the Update then shut down your device with the main power button. Reboot then configure the BT port in BT Settings.
Start TomTom then configure as "other bluetooth GPS" in GPS Status.
thanks for the reply
ive got v5.0 so will try this update.
jav
Sup,
I bought a Qtek 9000 and it came with a Holux GPSlim 240 Bluetooth GPS Receiver. It only came with the receiver and nothing else (no manual, no cd, nothing). So now I have no clue on how to use it. I went to the Holux website and downloaded the manual but its no help. None of what they're showing in the settings are what I have. It looks like the manual is for WM2003, but I'm running WM5.
The phone came pre-installed with Garmin Que and GPSProxy. I have no clue how to use any of these programs. When I load GPSProxy and try to add a new virtual COM port, I get an error saying "Failed to load driver for new virtual COM port. There may not be a free COM port number.".
So if any of you know how to set this stuff up, tell me how.
Thanks all.
gps
hello
with what gps software are you tryuing to use the receiver?
most of the time u have to connect it through bt at first
after that u can create a outgoing port ( i noticed that the first 5 dont work) , i used com port 7
after that u open the settings for gps in the program that you would us en set the settings for the holux receiver as you can find in the manual.
That should do it
greetzzz
Mr grey
the software that is already on the phone is Garmin QUE and GPSProxy
i connected the reciever through bt on my phone and enabled the serial thing
i went to the bluetooth settings and made the outgoing port for it, making it COM 8.
after that, i dont know what to do...
the manual that i got online doesnt help
got any ideas?
thanks
hello
normally now you must configure the settings in the gps soft of garmin.
for that u need a manual of the software, probably on h$$p://www.garmin.com
greetzzz
sup, I did what you told me in your last post and it worked. however, only on live search and google maps. I will look into the garmin website for the garmin program. thanks for your help!