Hi,
I've just got my MDA PRO: so far I love it and hate it.
Its works ok in gprs and 3g mode. The wifi has worked for 3 occassions, it never connects properly after it is switched back on again. Now I can't get a stable connection at all.
I have a standard 802.11b access point. It has proved to be very reliable in the 3 years I have had it. Everything can connect to it, bar the MDA PRO.
I have tried setting the AP to 1-13. Doesn't make any difference.
I have used 128bit bit and no WEP.
The AP is 1m (3 feet) away, so no problems with a weak signal.
The firmware is standard, see below for version.
I have done soft and hard resets.
For me wifi is essential.
Can any one help ? I have tried to collect some of the other ROMs from the ftp server, but most don't seem to be available.
firestormer said:
Hi,
I've just got my MDA PRO: so far I love it and hate it.
Its works ok in gprs and 3g mode. The wifi has worked for 3 occassions, it never connects properly after it is switched back on again. Now I can't get a stable connection at all.
I have a standard 802.11b access point. It has proved to be very reliable in the 3 years I have had it. Everything can connect to it, bar the MDA PRO.
I have tried setting the AP to 1-13. Doesn't make any difference.
I have used 128bit bit and no WEP.
The AP is 1m (3 feet) away, so no problems with a weak signal.
The firmware is standard, see below for version.
I have done soft and hard resets.
For me wifi is essential.
Can any one help ? I have tried to collect some of the other ROMs from the ftp server, but most don't seem to be available.
Click to expand...
Click to collapse
You should update your radio rom. I am using the MDA Pro with my Wifi router (WEP enabled). No issues at all.
What Radio ROM are you suggesting?
I too have problems with wifi and my belkin when set with 128bit encryption.
It works fine on my mates Belkin with no security.
Frustrating YES!
found solution
I've fixed my wireless problem - my old wireless router is failing, I found my laptop was dropping the connection too. So I went and bought a new Linksys WRT54GS. Very happy with it, works with all my wifi gadgets with significantly better signal strength too. I've got it working in WEP, b & g mode.
Related
Hi, i recently bought and upgraded a 02 XDA Mini S to WM6 and the wifi seems bad like i have to go right next to the wireless point to get a good signal and even then its not at full bar can any1 help me with this or is it just the wifi is rubbish on the wizard?
thanks,
Kurt
Did you go to start-->settings-->connections tab-->wireless LAN-->power mode tab and set it on best performance? That should give you some more room to work with.
yep still is really bad though about 10 meters and 2 walls away from the router an i couldnt get a signal.
At "10 meters and 2 walls away from the router" I also get no connection -where my Wifi enabled laptop works fine at the same time. Seems like the Wifi on the HTC device is rather weak and operates from a small distance only. Anyways I've learned to live with it.
oh rite well annoying though considering my dell axim x51 can get a very good signal like 30 meters from the access point. is there anyway i can up the power on my wizard? ive got wireless G enabled aswell.
Ya, I have a 7db antennae on my router and I still seem to need to be inside of 20 or so feet, and no walls for my wizard to find the network. I think it's just a weak card.
I also noticed that.
Yes I also noticed that. I have a wifi hotspot subscription and with my old WM5 ROM i can connect and surf without any problem, however when useing any WM6 ROM i just connect poorly and the connection breaks everytime.
Even in my wireless home router i had turn on the name broadcast (enabling WEP of course) in order to connect properly at the first try.
Ive noted this with every WM6 Rom out there and since my device is a G4 i cant upgrade the radio rom. so... well i suffer from this issue also.
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
pvanbrakel said:
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
Click to expand...
Click to collapse
Chek on Universal forum, there are some guuys with the same problem
But a hard reset should help
Don´t forget to vote!
KPeriod said:
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
have you solved the problem?
i have the same same issue with modem-router wifi Sitecom wl
Every 3 - 5 minutes while browsing, my wifi will "hang"
it doesn't disconnect, the wifi icon is still there as if I was connected,
if you had solved can you tell me how fix it?
Bye
Hi,
It looks that I've got the same issue as you have - the connection is still active (at least, the icon shows that), but after a couple of minutes, I cannot access any website.
Did you guys find any solution to this problem?
thank you very much
Ive had that problem with a few routers(i know the answers late, but maybe it will help someone at least). I had to disable the routers firewall. Once that was done, no disconnects. Weird.
Is anyone else having issues with the WiFi stalling and having to reset it, even though signal strength shows as excellent?
It's not a channel interference issue as I know what channels are in use, plus its doing the same on 3 different networks where other devices work fine, I'm using WiFi fixer to reconnect but its still problematic.
What have others found to be the best solution?
Samme issue here. Wifi keeps on disconnecting/loosing the connection and is most of the time unable to reconnect. Have to either turn wifi off/on or choose "forget" and reconfigure the AP my Hero in order to get it to work again.
It´s a Linksys WRT54GX running WPA/WPA2 + TKIP.
Have used an iPhone 3G on the same router for a year now without ´any´ problems.
I'm using WiFi quite often but I don't have this problem with my Hero.
Are you absolutely sure that there isn't any interference? It might be that the Hero is just a bit more sensitive than your iphone.
Today I found G-mon at Market which scans around for WiFi-networks. Perhaps you'll find out that there is a network that's interfering constantly. I've had that a few years ago and then found out that the bus-company uses WiFi on their busses which uses the same channel as I did with my WiFi-network.
Thx for the tip. Checked and no interference.
Also having this problem with a Linksys WRT54G. No WPA though.
I don't trust this router at all; using WPA and connecting a Dell Axim X51v to it in the past used to knock out WLAN on router, needing a hard reset.
same problem here. Wifi is disconnecting randomly within a few meters from the Airport extreme. It also reconnects again...most of the time....without me doing anything.
i'm also having problems with wifi - using a linksys befw11s4 with wep. i've got everythign else turned off - have followed all the instructions i can find here in the forums, and not had any success :/
If you press the Menu button in the Wifi settings you can select Advanced. There's an option there that defines when Wifi is disconnected. If you set this to Never than the Wifi connection will be stable. (At least in my case it is).
Again, thx for the tip but this is not really considered a "solution" but rather a workaround.
I don't like the idea of having it on "allways on". A real battery drainer and it shouldn't be necessary.
I had similar issues with my wifi (Linksys WRT160NL) until I installed "Wifi Fixer" from the market on my hero. Since then wifi runs without problems!
I had similar problem, Linksys WRT54G v1.0 running fairly old (but latest available) Linksys firmware, with WPA/PSK.
Yesterday, re-flashed router to Tomato (based on HyperWRT), setup for WPA2/PSK(AES) and now all is working perfectly, no problems at all.
So looks like some incompatibility between the Hero and the Linksys firmware, for WPA.
Well, I'm running the latest firmware for my router but have now done some other configuration changes and it seem somewhat consistent with your findings.
Previously it was running in a "WPA, WPA2 + TKIP" mode but it has now been working flawlessly since I change it to "WPA2 + AES". Hence:
- WPA2
- AES
=
- WPA, WPA2
- TKIP
=
Info, update on the router: I'm having a WRT54GX, not WRT54G.
interesting; I had no choice but to upgrade, as the newest firmware for the v1.0 WRT54G doesn't - I believe - support WPA2.
Since I had many other wireless clients working fine with WPA (not WPA2), but not the Hero, one wonders if there are some WPA bugs on the Hero that get tickled by older routers, or just that the Hero is being less lenient than other clients.
glad yours is better too, anyway
I found that wifi performance and stability on the hero improved a lot when I changed my AP from dynamic 802.11 b/g/n operation to 802.11g only. I've seen other boxes with linux having similar issues with this AP (D-Link DIR-655), which points towards a driver issue. Wifi works better on Linux kernel 2.6.30 and later on notebooks so things should improve once HTC produce a build that include a more recent kernel. Wifi was quite a headache on notebooks too with the drivers in kernel 2.6.27.x that is included in the current hero firmware.
I have same problem - frequent line drops whne full strenght signal shows
I also have a Linksys WRT54G - never had any problems before.
tried wep and wpa -no difference.
Also tried some "always On" utility from the market place, it only helped reset it quicker.
As stated above, mine got more stable when fixing router to WPA2+AES but I now realize that I still do experience connectivity issues, although less frequently then before...
i don't think this has anyting to do with the router. I got a router from HUAWEI,forgot its brand, but not linksys for sure. I've tried the university wifi as well. they all have the same issue.
Mine is working great with a Belkin.
Looks like a problem with the Linksys firmware.
Anyone tried a firmware upgrade on the router?
Uqbar said:
Mine is working great with a Belkin.
Looks like a problem with the Linksys firmware.
Anyone tried a firmware upgrade on the router?
Click to expand...
Click to collapse
Indeed, if you read up just a few posts, you'll find that question answered
that said, although things seemed initially to get better, I'm still seeing regular drop-outs with the upgraded router, and now still with the Hero upgraded to the HTC 2.0 ROM.
I do note that it seems to drop most when I'm sitting quite close to a different strong wireless client, e.g. a laptop. Perhaps the Hero just isn't a strong enough signal, and gets swamped?
Anyone else notice a correlation between dropouts, and proximity to other clients?
I have a vodafone uk hd2 and have been really impressed with it as a product. I have not had any luck with the supplied wifi router software, I go through the minimal setup and press start and as far as the phone is concerned the router is up and running, the problem i have is that neither of my laptops can see the router.
Has anyone had any luck using it? Is it possible that vodafone have disabled it somehow?
Alternatively so i can manually add the router does anyone have the following details that would be setup automatically;
wep in use? is it 128 pass phrase or 40/128 key?
open system authentication or shared key?
im guessing the wep index would be 1?
Thanks
Search .. it was discussed 10 times already.
Thats as maybe but none of the several threads have a real answer as to why some people have it working and others dont. It also seems that the functionality can be effected by soft reset which isnt ideal at all. Also i havent been able to find any of the above original settings that i asked for in the threads hence the post.
Works for me
Hi,
works great for me - just have to make sure that you're not connected to WLAN with the HD2 when trying. Disabling WLAN, then starting WIFI-Router does the trick for me.
Good luck !
I am on vodafone and wifi router works perfectly for me. It worked when I had the stock 1.43 rom and it works with all the cooked roms I have used since.
i did notice it only works with 802.11g not with 802.11b devices like PSP or some other phones..
Is that really the case that it only works with 802.11g devices? Im fairly sure my netbook isnt new enough to have 802.11g and as such probably wont see the router. Has anyone found a way to get the router visible to 802.11b devices?
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Just to add on my previous post , I tried using WMWIFIRouter , also come back to same result ....
pagoda123 said:
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Click to expand...
Click to collapse
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
N Works
bel_z_bub said:
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
Click to expand...
Click to collapse
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Any chance it's the computer you are trying to connect with? Tried with my work computer, but couldn't because our Dells have computer to computer(adhoc) connections locked out for security. Does the wifi router function show up as adhoc or access point?
zSpinner said:
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Click to expand...
Click to collapse
ok, now try and get N speed with only one antenna...
Ok Ive got a similar problem with the wifi router and vodafone
everything works hunky dory wifi router turns on, computer connects all is good only when i try and access a website i get a http error 403 forbidden message as if voda have restricted access i have no idea how this would be possible though.
Ive tried many site same result and many browsers chrome, safari, ie, firefox and opera
same thing
the strange part is that tweetdeck and skype work while the browsers don't
HHMMM
anyone else experienced this problem
As I'm on O2 I was quite keen to flash a new ROM to get the wifi router working as they did the dirty on us by ripping it out of the 1.43 they shipped it with...suffice to say that I'm not overly impressed with it after the couple of trials I've made using 1.66 ROM as the speeds its capable of generally fall short of what you get if you simply connect it via usb and use data sharing..bear in mind that I've only tried it twice so far and as such I may refine my opinion with further trials in different locations but as I was hoping to avoid repeatedly connecting leads to the usb socket it's a bit of a blow sooner or later, wear and tear will be an issue to think about.
my findings
had a play with the router, just to see and initially thought it wasn't working.it connected, but wouldn't pass any data.
25 minutes of my best network technician skillz later still no joy... that is until I remembered the laptop has a fixed ip and default dns server address set. as soon as I set them to automatic, bingo, fully working.
did a speed test from the laptop (mobilespeedtest.com) and got just under 900kbit over 3g. winner!
The connection only shows as 802.11b, but that's fast enough for the 3g connection so no worries.
the only down side is that it's adhoc, so the wifes n95 doesn't see it..but then again thats possibly a blessing In disguise!
EDIT as mentioned by the poster below, I had three connections present, (wap.o2.co.uk, mobile.o2.co.uk and paymonthly.o2.co.uk) and the router wouldn't work on them all, though I forget now which it would and which it wouldn't.
I never tried with 1.43 O2 ROM, but after flashing to 1.66 stock rom I just tried this.
For some reason I have 3 internet connection options:
1) Pay monthly contract
2) o2 active
3) mobile web
My standard connection is "mobile web" so I tried this first, and my laptop couldnt see the HD2 as a WIFI router. I then tried the "pay monthly contract" option and it worked straight away.
Now under my Notifications screen under O2 3G UK, I have two connections running, and the download speeds running the same as my home broadband due to the HSPA connectivity available through the phone.
Anyway, I just thought I would share this with anyone it may help.
My WiFi on the Atrix crashed all my 3 routers (ActionTec/Dlink/Linksys), sometimes after a few minutes, sometimes after several hours.
The routers needed restart after that. Also wired connections were affected.
I tried messing with static IPs and sleep mode, nothing worked!
Now I upgraded my Dlink DIR 655 from 1.11 to 1.33 (supposedly the best).
Things changed
Now my Atrix takes only itself down, the Dlink keeps working for other wireless and wired devices.
The Atrix says its connected and I get the icon with full bars, however no data is transferred. The market and other apps say network error.
I can switch connection over to my other WIfi network and all is good again.
Has anyone seen this behaviour?
Also is there an app that shows me the link mode G or N and the current link speed? I cant seem to find a good app. I would also like to see if I can lock the Atrix to G or N only. Is there such a toggle switch?
Thanks.
Update: Switched connection from Dlink to Linksys and it worked for about 30 minutes then the linkksys crashed (could not reconnect got no IP). Switched back to the Dlink, got connected, good signal but no data. Even after a phone reboot. So I think it might be still on the DLink side although I have Netflix (PS3 wireless) and another PC connecting fine. This and the VOIP mic problems (Skype etc...) bug me the most about the phone.
ive been having this same problem since i got my phone and im still having problems. its pissing me off. cant even use my netflix through the Wii to watch on the big screen
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
gnahc79 said:
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
Click to expand...
Click to collapse
centurylink is my isp. i dont know if its my router that is just crappy or my cell phone is interrupting it while the wifi is on and im trying to browse causing the routers wifi to cut everything off thats on wifi