I am new here and I think an urgent re-cap of all the information about the unlocker is needed
If there is a good soul that can explain:
1.Where is the latest version of the unlocker
2.What exact changes need to be made in the reg
3,How to use the extrom,with which tools
A lot of work has been done by you guys but for new users it is quite unclear and confusing
Thanks
Fefe
Related
Hello i just upgraded my QTEK from ROM Version 3.14.06 ENG to ROM Version 3.16.13 ENG and from Radio Version T313 to Radio Version 3.19.01. Everything worked fine and the ROM and the RSU were upgraded with success but idnt find any deffrence the device is still the same as for the GPRS i was hopping that when the device goes to standby it wont disconnect. Any idea what are the changes in the new ROM i have installed and the bugs that were fixed. If there is new ROM updates then the one i got from qtek.dk where are theyand will they work on my QTEK 1010 32MB.
Thanks
<flames>
3.16.13 is CRAP
</flames>
)
use 3.15.15 + 4.16
Where can i get them from?
Thanks for your reply, but where can i find those updates and will they work after the current upgrade that i made. Finally will they work on the Qtek 1010.
Thanks
as I said... 3.16.43 is unofficial and I can't share it... 3.15.15 is out there somewhere (use the Search function )
Couldnt find it!
Hi again i can find the new ROM versions that you instructed me to use instead of the ones i download it. Can you provide me with a direct URL to download the 3.15.15 + 4.16 ROM and will they replace the 3.16.13 Version.
Please advise
Thanks
Amer
Re: Couldnt find it!
ARZLEB said:
Hi again i can find the new ROM versions that you instructed me to use instead of the ones i download it. Can you provide me with a direct URL to download the 3.15.15 + 4.16 ROM and will they replace the 3.16.13 Version.
Please advise
Thanks
Amer
Click to expand...
Click to collapse
Interesting. Can you tell me which site you been to that you manage
to upgrade your qtek before?
Sure ,
a while ago you could have found it on www.qtek.dk but for an unkown reason they have removed its link from the main page now you can find here:
http://qtek.dk/software/
Enjoy
:wink:
be careful how you give information
Hi,
Please be very careful how you give out information.
You have screwed up I believe many people who got
their device frozen and cannot be used after trying to
upgrade the ROM and Radio Stack from the website
you provide without warning people of the serious
damage it could cause if the Rom & Radio Stack
upgrade is not from the same source.
It is good that you are trying to help people but I hope
you could continue doing it BUT please give a complete
and proper advise. Hope you get my message.
From
One of the victim
I expect people who buy this device to have a certain amount of IQ. Everybody knows flashing them IS dangerous, so they should know as much as possible on the item.
Before I flashed the device for the first time, I've already read EVERYTHING which is in the ROM Upgrade forum and everything which mentions ROM on this site. I knew which is the best, I knew where to get it, I knew I can screw it up and I knew how to NOT screw it.
It's peoples fault if they brick their units.
i dont know where to start with this but i should agree with Zviratko 100%
we expect people who buy this devices to have a certain amount of IQ and knowledge most of us here are pros.
Please understand that if you dont know what you are dealing with dont bother doing it. Read all the forums and pages of Xda-developers they contain the biggest archives about those products, learn then apply.
Zviratko is one of these important resources learn from him i know i did!
:roll:
Re qtek 1010 rom update
could you please tell me where you got your rom update from. I have been tearing my hair off trying to get the right update. Some genius upgraded using the O2 upgrade and killed his QTEK.
We currently have two clues which seem to indicate there may be a problem unlocking Radio 4.20. Specifically, there may be a problem with the %UREG command.
Please note that this is as of yet unconfirmed. However, we would at this point advise anyone upgrading to 4.20 to unlock before upgrading.
It would help if we had an RSU package for Radio 4.20, so we could look at the ROM and see what happened. Was Radio 4.20 part of any of the upgrades out there?
Also: I'd like to hear any and all stories concerning the use of The Manipulator on Radio 4.20.
Hi chaps
Thanks for this post! I was getting worried it was me sat here!
Can I be of assistance in some way with my 4.20 Radio XDA - can I offload and upload you a copy of the RSU info you require???
If so, let me know what to do and I am more than willing to help.
Regards
Rog
Sorry I hadn't logged in. The above post was from me.
Rog
My XDA came with Radio version 4.20.00 and ROM version 3.16.32 ENG
I will have an SD card soon so I can send any files from my XDA to you. As long as you tell me how to do this.
I would like to unlock mine and change the IMEI code on it as well but as i am not an experienced user i am not willing to try it first until it has been confirmed that this definately works with my ROM and Radio versions.
By the way
what is a RSU package??
RSU
I have the RSU for 4.20 if you would like it.
MineshT said:
what is a RSU package??
Click to expand...
Click to collapse
RSU is the Radio Stack Utility.....
The "Programm" that is needed for the Phone Functions.
Regards
Stefan
The same problem seems to exist once the QTEK ROM/Radio upgrades have been installed on an XDA. The XDA is working perfectly, but XDA-Manipulator isn't accessing anything...it just reports errors.
can you still use hyperterminal to access the XDA and find the unlock code?
NO, hyperterminal and dualser command doesn't work.
We await progress! - Have the developers got hold of Radio 4.20 to play with yet I wonder??
Rog
Is there anyway to take the BIOS back to an earlier version?
Not unless you can get the existing commands to work.
Bit of a chicken and egg situation here! Without dualser UREG function you cant do anything. Therefore you cant get back to an earlier version either!
Rog
I have a couple of these phones with this version (4.20) on them, tried them all with Manipulator 1.02 but all wouldnt work, im willing to "test" any new methods of unlocking them, if anyone has any ideas let me know, i'll be glad to help
We have a 4.20 RSU, and thus we have the image.
We've held off looking at 4.20 specifically, and currently some precious spare time is being spent on looking at the way the RSU upgrade process works. This would, among other things, give anyone the ability to unlock without needing a serial cable. We've come a long way, but some work is still in progress. And people have less time than they'd like to have, and stuff.
You're all due a magnificent set of new tools (coming soon!), and some further explanations and documentation regarding the inner workings of the Radio Interface Layer (RIL), and more.
Stay tuned...
Talk about whetting the appetite!
We await with eager anticipation and an offer of help if you need it.
Rog
Is there any idea of release date to support the unlocking of the 4.20 Radio
Anonymous said:
Is there any idea of release date to support the unlocking of the 4.20 Radio
Click to expand...
Click to collapse
Today...
Hi everyone
I am new here and I think an urgent re-cap of all the information about the unlocker is needed
If there is a good soul that can explain:
1.Where is the latest version of the unlocker
2.What exact changes need to be made in the reg
3,How to use the extrom,with which tools
A lot of work has been done by you guys but for new users it is quite unclear and confusing
Thanks
Fefe
Some info about my phone
IPL 1.08
SPL 1.08
GSM 01.09.10
OS 1.8.10.2
I would like to upgrade to the latest i-mate rom ( i think ) i don't know any differences with any other roms etc... ive been looking on the other threads maybe if my question has been answered with someone else... i can get pointed to a proper thread, i just want to know what steps i should take to upgrade my rom, i dont wanna lose any data, not that i have much id like to backup my contacts basically thats the most important, also.. since i dont have money for a 128 card right now would it be possible to load someone elses backed up tmobile mda rom ? if they zipped it up and sent it so i can restore it when i get a msd card.. any help is greatly appreciated , thanks in advance.
Copy your contacts by ActiveSyncing them to a PC, or copy your pim.vol (in the root of your Device) to your SD card and upgrade it.
Good luck.
Ahhh
Ah okay now... which rom should I try out first ? and... don't i need to CID unlock it? i'm trying to find a good thread on the upgrade procedures and the best rom to try first.
Best rom...best rom..... the Rom you choose is a personal choice (and yes, you need to CID unlock first IF you want to upgrade to a Rom of another manufacturer, if you have lets say T-Mobile and you want to upgrade to another T-Mobile Rom, you don't have to CID unlock your Wizard).
I like the Qtek Roms myself, but then again, I only use Dutch Roms, not WWE (WorldWideEnglish) Roms, so I have to make a choice between T-Mobile or Qtek and then the choice is simple in my opinion
If you don't know anything about upgrading, my opinion is, try soms official Roms first, then you know what the deal is and then you can make a choice if you maybe want to use a customized Rom like the Mr. Clean Roms for example.
Regards,
Molski
p.s. There are A LOT of threads about upgrading.
Ah thanks for the info... i tried a beta 2.24 rom i think... its pretty nice, i personally cant tell much of a difference,, connmgr is different has more options etc... im thinking of trying mr clean 2.3 is the latest right ? and if i get this does it include all the office apps and such ?
a second question... i dont like the wifi apps included and i noticed an AXIM dell PPC with WM5 had a nice wifi config app/wifi AP finder, and noticed it was made by Hi Tech Computer (HTC) any way to copy this or use it on my phone ?
check my other thread about my CID unlock problem and let me know if i should try to CID unlock it again... and backup... thanks!!
Hi,
I have just baught a HERMES (SPV M3100). Orange has set it up so I cannot use many websites (googlemaps etc). What do I need to de-orange it?
Also - can I get a new active sync? (the one that came with it doesnt sync contacts and doesnt sync with microsoft outlook).
I think maybe I need to Cook or flash my HERMES?
Sorry that these are basic questions. I have read the Wiki, but am no familiar with al the terms.
appreciate any help or just a pointing in the correct direction
Thanks!
Scot
I can suggest you to search the forum
You can use the search function inserting any of the questions you posted above.
I got an SPV M3100 and I flashed it with various roms.
It's a simple process if you follow ALL the rules.
you can start from this page:
http://www.mrvanx.org/hermes_guide/schap
Following this guide you can unlock your device and flash new roms
I can help you if cannot find what you want here in this forum
You're welcome
unlocking
Thanks for that link Elehicmo,
It is very helpful for me a (complete novice).
So to unlock a device I need to Flash HardSPL which is a modified bootloader ? (have I got these terms correct)?
If I stop after the flash Hard SPL stge will I have the same device as before, unlocked?
Few things I wasnt sure about, after reading the site:
"If your SPL version is 2.10.olipro then you ALREADY HAVE HardSPLv7. You do not need to flash it again."
How do I know if my SPL version is 2.10.olipro?
This step is not mandatory but if your radio version is "1.20.31.10" or below
How do i know if my radio version is "1.20.31.10" or below
Can you give me any suggestions as to whether Full, medium or vanilla version of Dutty WM6 v2 would work the best for me - I do not yet have memory storage but I wouldn't want to miss out on key features of WM6
Many Thanks, appreciate any direction with these questions.
Scot