Hello,
Just installled new SD wifi card from spectec.
And I'm very surprise to have some less signal strenght.
max 15%
I try to put the S110 just 10 cm from the wireless Routeur and also max 60% of the singal strenght.
Try spectec drives and also E300 mod drivers nothing better,
Some of you have an idea ?
Regards
Thx for you help
Related
Did anyone experiment with integrating a wi-fi SDIO card INSIDE the Magician? I am curious to know if there is enough space inside the case to solder in the internals of the Sandisk WiFi card.
Would also be interesting to know if it is possible to integrate the Sandisk 256 meg wifi card but leave out the Mem and wire it back to the SDIO pins so that the card slot could still be used to plug in a 1g-2g card and still enjoy built-in wifi...
Thought I ask it here, perhaps someone heard something. In case I put a bug in anyone's ear, a reminder that experimenting with something like this will void the warranty... so at your own risk But if you decided to do it, let me know
I think that's impossible because there is almost no space inside the magician. Moreover, such modification will mostly disable the fuction of the SDIO slot when you enable the sdio wifi card, I blieve it is pointless to do so.
Why don't buy a blue angel or wait for the next generation of magician if you really need wifi but do not want to use an external wifi sd card.
Sorry for jumping in here . ..
Is the Magican Qtek s100 support the 256mb WiFi SD card.. ?
Sandisk says NO on my question to thre support .
Here is the answer below..
........................................................
Got this on my question from Sandisk about the s100 / wifi 256mb SD..
SanDisk Response: (12/20/2004 11:04)
Dear Joachim
Unfortunately, due to lack of Custom Bus Driver on your device (MOST HTC DEVICES), the unit will not support this card. We hope that your device manufacturer will soon come up with a fix on this issue.
We appologize for any inconviniences this may have caused you. We recommend that you use the SD WIFI CARD with no memory instead.
Kind Regards,
Sudhi K.
SanDisk Technical Support.
--------------------------------------------------------------------------------
Your Response: (12/21/2004 12:43)
Hi again .. Plz look at this URL: http://www.mtekk.com.au/forums/viewtopic.php?t=4630 Its a AU PocketPC forum. There is a guy that says it works. Are you completly sure that the WiFi 256mb one dont work in this new Qtek s100 / iMate Jam ?? Regards Joachim
--------------------------------------------------------------------------------
SanDisk Response: (12/21/2004 12:43)
Apparently this user has been able to get it to work. Our position is the same. The unit is not supported.
--------------------------------------------------------------------------------
Plz.. say they have it wrong .. or have they even tested..??
Carlis
Sandisk says NO
And I say YES (I'm posting with it just right now !!!!!)
It work great (WifiFofum found 20 wifi access point near my home , and +/- 80 access point on the road to my office )
Buy it, you won't regret !!!
Anything I need to do when I install it.. ?
Or just use the latest drivers from Sandisk ??
U can access the 256 mb onboard the WiFi card without any problem?
I feel the Qtek S100 realy need the extra mem on a SD card ..
Was soo sad when they told me it will not work...
Ur answer maked the day
Regards Joachim
I got no problems to access the memories
TNX Marcus..
Looks like I just have to buy me a "nonworking" Sandisk 256mb SD
I suppose if I send in photos of it in my qtek .. sandisk still says it isnt working ..
Regards.. Carlis
Bad Luck Carlis
please, do you use sandisk or socket drivers with your sandisk card ?
thank's
I use the driver provided with the card (sandisk)
But I will try the socket (i heard that they work better)
Hi, what do I need to connect my Qtek 2020 with WIN2003SE to my wi-fi access point? Adapters, software etc.. I searched some info around but I still dunno what i need... please help me
Just a SDIO Wifi card. Do not but the cards with built in memory because that would not work.
Mark
The SDIO wifi card won't work with the 256MB built in memory with the Qtec 2020. The card without the memory from Sandisk works very well.
i got a sandisk sdio wifi card two weeks ago, for my brand new tsm500 (same as xdaII) and at first was very disappointed as card was very slow. Supposing was due to some special configuration of my home wireless network, i tried all the tips i know about, with no results at all. Took a look on the net and found out that most of users of this card got the same problem. but found the solution, too, on a spanish forum: uninstall sandisk drivers and install the ones from www.socketcom.com, its sdio wifi card has the same chipset. new drivers makes card much faster, has got a more friendly desing and its configuration is very easy. just try it and post the results.
greetings from daniel
Sandisk 256MB + Wifi and MDA Compact
These drivers don't work with Sandisk 256MB + Wifi and MDA Compact. I don't know witch devices doesn't work but I think it's the Sandisk 256MB + Wifi.
Do the Sockets drivers work with the standard SD WI-FI (the one without the ram) and the MDA Compact IMATE Jam?
These drivers work fine for me, using a standard Sandisk Wifi card (without extra RAM) on a XDA2
Is that the low voltage sandisk card?
mhanbury said:
Do the Sockets drivers work with the standard SD WI-FI (the one without the ram) and the MDA Compact IMATE Jam?
Click to expand...
Click to collapse
Yes, it will work. SanDisk only came out with 2 SDIO WiFi devices, the first one having no storage, and the second on with 256MB of storage. SO if your card is the one without storage, it will definitely work.
Greetings.
I'm thinking in buying a pretec wireless card for my magician, and I have some questions:
first: how much do you think battery time will drop? Will it drop to half, or less?
secondo: does the card powerdown when phone goes to standby? can I receive mails even with the phone turn off?
third: any info about pretec performance? what is his chipset?
Thanks for the attention.
Hi!
I'm from Portugal too and i bought a pretec sd wlan at Vobis, for my magician. I had a few problems. First if you have the first version of the magician (like I had) the SD WLAN will work all right. If you have a later version (and I'm talking about hardware) the SD WLAN will only work if you peel off the green sticker, wich will allow the SD WLAN to make proper contact with the SD Slot... After this problem solved we have the drivers... Very bad drivers... I don't like them a bit..
After that the encryptation.. I'm still having problems with that. Either you have a wireless router with the encryptation off, or I think you'll have problems too.
Regarding the power consumption. I find that the magician reaches high temperatures while the SD WLAN is connected, thus it spends a lot of power. Yes the SD WLAN turns off when you stand by the phone. The battery time will drop very very much.. I advice using the power adapter while using the SD WLAN.
I have one! I would not buy this SD WLAN again!
If you have anymore question I can try to help more.
Cheers from Cascais
Obrigado rapaz Assim tiraste-me todas as duvidas de uma vez só.
(I'm just saying thanks to him)
Tás na boa, sempre às ordens!
(just saying welcome!)
Hello,
next week I'll get my MDA Compact. Does it have wlan integrated or have I to buy a wlan-sd card?
Sorry no wifi Integrated..
Cheers
Hey,
I just bought Plus 802.11g 54mbps sdio wireless lan adapter for my xda2. It isnt working...I am running wm5. Tried to download multiple drivers but no effect when I insert my card in my mobile. Please can anyone help me how to make it work???