I successfully installed TT5 onto xda exec and activated it to find I needed to install the voices separately. I tried to install from cd but an error message appeared saying that the applicationwould have to be closed. I tried this many times and on each occasion the same thing happened. I then tried to download via the xda itself-yet another error message"you need to reset your service account. Having had real problems already getting the activation code from TT support i couldn't believe that i needed to contact them again. I have now managed to download via my laptop and pasting the files into the voices folder but i still can't download poi's can anybody please help?
Also is anybody else having problems with TT support.
Why don't they have a forum like this which is so helpful?
Related
Has anyone managed to install Destinator 3.075 on Jasjar
Yes, try searching and you'll find your answers!
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
yes, thanks hadn't thought of that....
of coarse I have tried searching, I have spent 3 hours doing so ... I have found lots of references especially to a post by believer... haven't as yet found the post which gives the actual full answer ...
found one which gave the ini mod for getting around the os check
-------
if anyone else is looking for answers that part is:
modify the [Platforms] section of C:\DestinatorApps\Installer\Console\Default.ini
add the line
P2577V351=ARM
-------
what I haven't found is the issue of the dll being registered.
Now that you have wasted everybodies time and had me write all of this, are you likely to be helpful and provide a link, (as you seem to know where it is) or are you more a smartass without a clue than a geovass.
Thank you irv777 nice to see someone with intelligence
no probs
davidberrysmith said:
Thank you irv777 nice to see someone with intelligence
Click to expand...
Click to collapse
You didnt search correct...
http://buzzdev.net/index.php?option...c=view&id=2529&catid=26&limit=15&limitstart=0
geovass, thanks for the link...
irv777, followed your instructions and the only thing I changed was to install from the consol and disconect the device when I got a error re registration of file. All the rest... Perfect.
Thanks again
Destinator on JasJar and regsvr_arm.exe
Can anybody please point me in the right direction as to find regsvr_arm.exe. I have followed all the directions so far and when I try run destinator I get a Destinator object creation error. The only thing I havn't done is the register bit, please.
here you go
Destinator turns off after some minutes
First of all, thank you everybody who gave instructions for the installation, of the Destinator specially for irv777. I followed the irv777 instructions and I could install the Destinator and configure the GPS perfectly. But I could notice that after using some minutes the Destinator, the screen of my Pocket PC turned off and when I turned it on again (using the light button), the GPS communication was lost because the GPS COM Port was changed. Does anybody have the same problem? Does anyone have any idea of what is happening in my case? I could realize that when I open the registry on HKEY_LOCAL_MACHINE/SOFTWARE/Apps/DestinatorApps of my Pocket PC it is different from the registry of the Pocket PC of my friend who installed the Destinator using the custom metodology (he doesn't have WM5). Is it the cause of that problem? If it is the cause how can I fix it? I don't know how to edit registry.
I havn't found any problems with it on mine. a possible work around for you might be to change the power and light settings so they don't turn off when you are using destinator.....
;-)
good luck
obviously i am doing something wrong here....
copy the destinator apps were in the ppc? i dont have enough memory eventhough my exec is recently formated (ppc 32mb free/destinator apps 36mb).
anybody?
edit: please mates.... i am leaving for a road trip in ten days and i could realy use a gps
Aussie topic - destinator cont'
hi guys,
I followed the instructions:
1. installed destinator on PC
2. copy all files (140MB) of them to the storage card
3. were trying to run ...\ARM\Independent\DestinatorApps\Destinator\Destinator.exe and got the error message described in the discussion
4. registered the dll in the windows directory...
now when trying to run the destinator.exe from the storage card I'm getting nothing (the screen flicker once)...
any ideas? any help would be appriciated.
irv777 said:
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
Click to expand...
Click to collapse
Is the procedure similar if you have an embedded GPS?
I have a Mio P350 & want to put Destinator 3 on it, do you install the console on the PC first, if so what files & from where do you install on the PDA, & what do you install on the SD card?
Appreciate any help I can get, as the MioMap v3.2 is driving me crazy!
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my xda exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
moved to universal
not sure how this posted here but moved to universal
I had the same problem: After much teeth gnashing I found a work around:
Explore the Tomtom install CD and copy the following files your SD card:
GPS.CAB - the conduit between TomTom and your Bluetooth COM port
PIMAddIn.CAB - the conduit between TomTom and your Outlook contacts
WZD.CAB - the Today plug-in (completely optional)
TTN.CAB - the actual application and data files
ENGF.CAB - Jane's lovely voice!
On the Universal, click and install the above files in the order they are listed.
You may also need to reload the maps on the SD card, which should be done via a card reader. I used my old registered XDA2 to reload the maps from the CD. Once you insert the SD card into the Universal, you would have to activate the maps via Tomtom customer support and fax over proof of purchase for the Universal / product codes / device codes etc to gain a new activation code etc.
For the record, I have deleted Tomtom from my old XDA2!!
I hope this helps!
creynish said:
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my xda exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
Click to expand...
Click to collapse
I had a similar error on the XDAII. Creating an empty file called CurrentMap.dat in \MyDocuments\TomTom (create the Directory if neccessary) solved the problem on my device
Topic moved to Universal section.
if you download and install 5.2 from tomtom it should go straight across forget using the disc
sorted
sorted with 5.2 but still needed to input voices manaually but working fine
Tom Tom will not load
I am trying to load TomTom 5 from an upgrade pack which I bought from TomTom including all maps. This worked fine with my XDA11i so long as I copied the application CD to my hard disc but doesn't work with the Exec. I get "The application at 0x004088C3 referenced memory at 0x00000000. The memory could not be "written"". I have tried installing the 5.21 download, which installs OK on my XDA11i but says "cannot connect to your device" on my exec.
I can't find any CAB files on the disc I have. They are all zip files and if I open the zips they contain files of .001 format or similar
Tomtom are no help at all as they say the exec is not on the list of compatible machines
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my XDA exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
(apologies for putting this on news forum originally)
Hi
get the 5.2 update from tomtom, install it, copy the voice files from you
v5 cd to tomtom dir in root "/", copy the maps to your mmc.
it worked for me
was the 5+5.1 known to not work then?
I had the same problems
Could not install from cd either whereas had no problems with my xda2-managed to use updat 5.2 but could not activate software via the gprs connection. ihad to get anew activation code from tom tom. this worked. i don't think version 5 is as good as version 3 and i wish i hadn't upgraded as not only are there more errors on the maps but it takes my new xda a lot longer to connect to the gps receiver.we found loads of mistakes when using the new version 5 on the xda2 in the summer when touring tom tom kept taking us to roads whichwere still under construction and couln't be used. we did tell support about this but i don't find them particularly helpful
creynish said:
was the 5+5.1 known to not work then?
Click to expand...
Click to collapse
my v5 cd crashed the computer when useing active sync 4.x same with 5.1. update....
5.2 installed ok.
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem
i've tried to install AIM... and a webcam program.. both of which install through active sync.. however everytime I try I get the following message on my phone...
"Installation of (whatever).CAB was unsuccessful." and that's about all I get.
Also whenever I connect the phone to my PC is says it's unable to successfully syncronize and asks me to reconnect the device.
MS's support site has been less than helpful... any help you all can give would be greatly appriciated....
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Hi,
Couple of things you might consider / try: -
Establish an activesync connection, then use the "explore" button, navigate to your staorage card, and manually copying the .cab file from your pc to the storage card.
Then on the treo go to file explorer, storage card, and run the cab from the card.
The other thing is to check that you're using activesync 4.1 or later - updates are a free download from MS.
Hope this helps
Angus
Thank you for your suggestions.
Unfortunately i've already tried copying the CAB files straight to the device and launching them produces exactly the same result.
I'm also already using Activesync 4.2 latest version.
Is there anything else I can try?
judging from your sig, you're using a pretty old rom version... I would definitly upgrade it and then give it another go...