Related
I tried to set the Intellipad as the default SIP but after a soft reset it reverts to Keyboard automatically.
Switching it manually before replying a message sometimes works and sometimes doesn't.
I tried re-installing Intellipad, but still have the same problem. I'm using the QTEK 1.11 ROM.
Anyone else experiencing the same problem?
It is true that after a soft reset the sip will go back to default, keybord. To change it you has edit the registry at HKCU\ControlPanel\Sip by changing the "DefaultIm" value, but I don't know the value for Intellipad. For Block recognizer as default sip change the value to {42429691-ae04-11d0-a4f8-00aa00a749b9}. Maybe other know the value for intellipad...
I've encountered that before, just use tweak2k2net and disabled those inputs that you do not need to use, leave only phonepad & keyboard (for me), perform a software reset and it will work again. (I've even have tengo Thumb keyboard) installed as well.
Have you got a link for tweak2k2net ?
I found it
http://www.tweaks2k2.com/
Unfortunately none of these suggestions worked. I can live with the SIP switiching to keyboard as default. What I can't stand is the fact that I have to reset my PPC every time I switch from Keyboard to Phonepad and vice versa.
Can someone pls try switching between keyboard and Phonepad for a couple of times and see if it works fine?
I have no problems what so ever.
Running ROM 1.11.00 on Qtek S100
It was determined by a very helpful person on PocketPCThoughts.com that resources for the SIP are shared with the Today plug-ins. So, if you have too many Today plug-ins or one Today plug-in that is resource intensive, chances are that your third-party SIP will fail to function.
I verified it by disabling all the Today plug-ins and it worked like a charm upon the next reset. Then, I started enabling the plug-ins one by one until I found out how much it can take before Intellipad (or TenGO Thumb) will just pull up the keyboard.
Too bad it's a Microsoft issue.
One of the few programs that seemed to have overcome this issue is Spb Full Screen Keyboard. I think Resco Keyboard is another one, but when they don't satisfy your needs, who cares about these two products.
I really enjoy Intellipad and the new TenGO Thumb, but you'll have to realize they are sensitive to the available resources that the Pocket PC provides. Perhaps contacting the developers would make them see the light, but I doubt it much.
I'm trying to see if I can come up with an alternative to the many Today plug-ins I have. I tried Snoopsoft Dashboard, but I got the same results, but of course, this is after many installs/uninstalls. I'm going to start fresh with a hard reboot and rebuild my Pocket PC software setup from scratch.
You can read the correspondence of how I got this issue addressed on PocketPCThoughts here:
http://www.pocketpcthoughts.com/forums/viewtopic.php?p=353877
BeyondtheTech, thanks very much for your reply. That explains it! I just need to decide which plug-in I can live without, SPB pocket plus or PhoneAlarm :-(
Hi,
I just bought the Qtek S200 ( It has Windoes mobile 6 professional on board ).
When I play mp4 Videoclips they get stucked and are not liquid. How do I have to encode them ( I have encoded the 320 x 240, but what bit rate........) ?
Is there a way to overclock the prozessor?
There is touchflo on board, but what is this and how do I use it?
Thank you in Advance;-)
The Prophet only has a 195Mhz CPU you will be lucky to get any 320x240 H264/MP4 video to play smooth.
You can overclock it but i dont think you will be able to clock it enough for smooth playback. Try XviD or DivX.
Play with the formating a bit, I got mine to play pretty smooth in full screen.
And how do I activate the touchflo? I only have the option to enable sound for scrolling, but nothing else.
Another question - has anyone found a IR remote control Programm that works with the xda Neo? Vito remote for Windows mobile 6 does not support the processor.
Another question - is there a good programm available to read pdf Files? Adobe Avrobat does not work for me. I click on the Icon, but nothing happens.
Please, anyone?
darkangel1 said:
And how do I activate the touchflo? I only have the option to enable sound for scrolling, but nothing else.
Another question - has anyone found a IR remote control Programm that works with the xda Neo? Vito remote for Windows mobile 6 does not support the processor.
Another question - is there a good programm available to read pdf Files? Adobe Avrobat does not work for me. I click on the Icon, but nothing happens.
Click to expand...
Click to collapse
These questions seem pretty unrelated...
To activate TouchFlo, slide your finger from the top bar (with the windows icon on it) to the bottom of the screen.
I don't have an IR Program as I don't use it, but I'm sure there are some somewhere.
Adobe Reader LE works fine for me. What ROM are you using? Attached are the files for Adobe Reader. Copy them across to your device and then run the exe in the folder.
Thank you for your help
I have tried the english version of Adobe and it worked for me-the german one does not work.
I was frustrated, because Touchflo did not work for me so I installed Spb Monile shell. Now Mobile shell opens for me when I slide from the top bar.
I have Windows Mobile 6 Professional CE OS 5.2.1948 (Build 18548.0.7.2) german Version - is this the rom version? Sorry, but I am totally new ( but happy ) with my Qtek S200
What is the name of the ROM for example: Coffie roms (ENG/DAN/NOR/SVE/NLR/FRA/GER/ITA/PTG/ESN/PLK)
Try downloading Adobe Reader from here (select the german version): http://www.adobe.com/products/acrobat/readstep2_mobile.html and installing it.
I think my Rom Version is shadow series cloudyfa.
Rom Version: 5.2.19.48 WWE
Rom Datum: 7/10/06
Funkempfängerversion: 02.07.20
Protokoll Version: 413.1.03
ExtTOM version: ShadoW 1.0 GER
I have another question: I tried some simcards and now I have all the contacts in my Qtek. I tried to delete them, but when I hold my stylus a few seconds on the contact there is an option to delete the contact, but it is only grey and I can not choose it. How do I delete contacts? Is the only solution via outlook on my desktop PC? That would be dissapointing.
Are they stored on your device, or on the SIM card?
On the device, you should be able to delete them through the normal contacts application. To delete SIM Contacts, you must use SIM Manager (it might be called SIM Toolkit) and delete them through that.
Thank you for you quick answer.
I have no Sim card inside the Qtek now. All the contacts were copied automatically to the qtek. I tried everything, but when I open a contact and mark it, I can not choose to delete it.
Is there another application that I have to install?
No. The built in software should be able to delete contacts.
In the contacts, click and hold on a contact (don't load it) and see if you can delete it there.
--or--
Load a contact. Tap menu, then select delete.
Thank you for your answer again
I did as you said: When I click and hold on a contact, there are the options send contact, copy contact, delete contact......., but I can only choose send contact. Delete contact or copy contact are grey, so I can not choose this option.
When I load the contact and choose Menu, I can only choose save contact.
I am confused, because I have so many contacts, but I van not delete them.
By the way, do you know if the technissin 4GB SD card silver will work with my qtek, because I wouls like to by it.
SD (no HC) should work. SDHC cards up to 4GB should also work but may need a driver.
I think that these contacts are not stored on your phone as you can save them... Try saving one and then see if you can delete it.
I am really confused. I can save a contact when I open it, but then I have two contacts. I can delete only the saved one - the other remains on the qtek when I go to contacts. Does that mean that each time I put a simcard inside the qtek it automatically copies them to the phone and then they remain there without any option to delete them? That is very strange :-(
By the way - I have no Simcard inside it now. I only tried some simcards to test the telephone feature.
Hi everyone !
I'm requesting a bit of help : I'm finishing up the latest release of Skinz Sudoku Pro (freeware version will come back a few days later, I have some things to adjust first ^^), version 1.30, and need beta-testers now...
The main features to test in the version :
- Better speed on slow devices and VGA
- Bugfixes (hints, awards, etc...)
- Custom sudokus (enter sudokus from a newspaper and play it later on...)
- New menu (nothing major, just to allow more stuff like custom sudokus ^^)
- Optimized ram use some more, smaller exe
The save format has been updated to allow custom sudokus. Because of this, people using very old saves may have their saves corrupted. To limit the damage, Skinz Sudoku will automatically create a backup of old saves. If you have problems, please send me that backup and I'll try to fix it...
Devices I'm looking for to test on (1 of each if possible) :
- WM2003SE, WM5, and WM6 240x320 PocketPCs
- 480x640 PocketPC
- Devices having the slow display driver problems (HTC TyTN II, HTC Touch Dual, etc...)
- 240x320 Smartphones
If you have one (or more ^^) devices corresponding to my needs, please PM me your email and the device you have (name + OS + screen size), I'll send you a test copy as soon as possible.
Thanks to everyone !!!
(of course, any help with feedback will get you a free copy once the final version is released : )
i can test it in a smartphone running WM6
I don't play too often, but I would be glad to help. I have a Blue Angel running WM 6.1 (one of the pdaviet versions, don't ask me which one cause I don't remember ), 240x320 screen size.
Tester
I will test on mogul with no2 5060 rom
I'll test on my TYTN II for you
I currently have Skinz Sudoku freeware installed on my TyTN II.
That version runs great.
I you still need it, I can test your new version on my TyTN II.
Mollusk said:
Hi everyone !
I'm requesting a bit of help : I'm finishing up the latest release of Skinz Sudoku Pro (freeware version will come back a few days later, I have some things to adjust first ^^), version 1.30, and need beta-testers now...
The main features to test in the version :
- Better speed on slow devices and VGA
- Bugfixes (hints, awards, etc...)
- Custom sudokus (enter sudokus from a newspaper and play it later on...)
- New menu (nothing major, just to allow more stuff like custom sudokus ^^)
- Optimized ram use some more, smaller exe
The save format has been updated to allow custom sudokus. Because of this, people using very old saves may have their saves corrupted. To limit the damage, Skinz Sudoku will automatically create a backup of old saves. If you have problems, please send me that backup and I'll try to fix it...
Devices I'm looking for to test on (1 of each if possible) :
- WM2003SE, WM5, and WM6 240x320 PocketPCs
- 480x640 PocketPC
- Devices having the slow display driver problems (HTC TyTN II, HTC Touch Dual, etc...)
- 240x320 Smartphones
If you have one (or more ^^) devices corresponding to my needs, please PM me your email and the device you have (name + OS + screen size), I'll send you a test copy as soon as possible.
Thanks to everyone !!!
(of course, any help with feedback will get you a free copy once the final version is released : )
Click to expand...
Click to collapse
I have and htc x7500 just send me a PM if you want me to test
Thanks everyone Sent PMs with the link
I have a kaiser and can test it too
Beta Feedback
Ok tried it and this is what I get (see pic below). The only way clear it is to soft reset.
Thanks for the opportunity.
Just an FYI..Perpetual image viewer did the same thing...
I could also test on X51V with WM6.1 I'm really addicted to sudoku
well, I played with it for a bit. Used every option and I have to say it looks great! Really fast, smooth transitions and animations. Will try it a bit more and see if I can find anything wrong with it, but so far I got nothing!
BA running pdaviet WM6.1
240x320
hs1333a said:
Ok tried it and this is what I get (see pic below). The only way clear it is to soft reset.
Thanks for the opportunity.
Click to expand...
Click to collapse
Thanks :/ Does that happen when launching the game or exiting ? Those it prevent you from using the game ? I just can't reproduce this on the WM6 emulator :s
Hi i have a HTC TOuch (ELF) that i can use for testing
Mollusk said:
Thanks :/ Does that happen when launching the game or exiting ? Those it prevent you from using the game ? I just can't reproduce this on the WM6 emulator :s
Click to expand...
Click to collapse
Yes as soon as I launch it. I can play it and the top bar just sits in the middle. Only way to clear it is to soft reset. Again the image viewer does the same thing, but it I play pipes it works fine. Not sure if you use similar coding for each app. The unit I'm using is an HTC Advantage
Not a big sudoku fan but i have a WM2003 device if it'll help. An Alpine with an official O2 ROM. Also got a non phone WM5 PDA, HP iPAQ rx1950.
I have a VGA device = i can help.
Well Here is my result :
tried it on my friends Himalaya running wm 2003se it works
tried it on my Blueangel running WM5 it works
tried it on my Himalaya WM 6.1 It works
tried it on my SP running WM 6..it worked in portrait mode only and its screen resulution is 240X320
I have an Atom Exec and am ready to try it.
Ok.. I'm so confused.
I just got a US version of the HTC Dual Touch from Best Buy. Apparently it's not even a Nike device. It's a Neon.
The only reason I know that is because I donwloaded and tried to installed the HTC Keyboard patch and it of course told me the patch was for Nike devices.
Regardless.. the problem I'm having is that in some applications, I cannot get the application to recognize the 20 key keyboard. What I mean is that it only registers numeric keys and the 1st letter of the other keys. So I can type 0-9, q, a, z, o, l, del, enter.
I've tried holding down the SYM key to get it to switch to another text entry mode and it won't.
The biggest problem I'm having is that my company uses Good Mobile Messaging. That means my email, calendar and address book are all served up through the Good suite of apps. And these apps won't recognize the keyboard properly.
I've also noticed this same problem using both the Windows Live and Google Search home screen plugins. They won't recognize the keyboard either.
Keyboard apps like TouchPal seem to work but I bought the dual to get the suretype keyboard.
Any ideas?
Your right.
Never noticed it because i don´t use those apps frequently. Maybe some Niki users could let us know if they ave the same issue.
I have the same problem as well. Got my Touch Dual from Best Buy. Found that the keyboard does not work in Goodlink and some other applications. Exactly the same symptoms reported by adamrogers. I'm disappointed to say the least.
Tried the keyboard patch from HTC's website and ran into the same "this is not a Nike" issue.
This may or may not help, but as soon a I uninstalled PCM Keyboard it was fine and was back to normal. I have not tried the mentioned apps though.
sn707 said:
This may or may not help, but as soon a I uninstalled PCM Keyboard it was fine and was back to normal. I have not tried the mentioned apps though.
Click to expand...
Click to collapse
So you are able to use the keyboard in apps like "Windows Live Search" from the Home Screen plugin?
I'm not even sure what PCM Keyboard is so unless it was already installed when I got the device, I don't have it installed.
It's just that stupid program from htc wich lets you choose what input to be used, (as far as i recon) the dual won't let you select the right input if you haven't selected a genuine wm textfield (like in opera 9.x, and the above mentioned apps). In my case, i can only enter numbers. Its a shame that htc uses a kind of software that doesn't recognizes those textfields...
adamrogers said:
So you are able to use the keyboard in apps like "Windows Live Search" from the Home Screen plugin?
I'm not even sure what PCM Keyboard is so unless it was already installed when I got the device, I don't have it installed.
Click to expand...
Click to collapse
PCM Keyboard is an aftermarket keyboard it seems to confuse the device. I ended up using a cab from htc that disables xt9 and am much happier now...
UPDATE_ I just tried and it does not help when I enable the windows live plugin and try to search... Numbers still... Dang Google plugin works fine though
UPDATE_ I just tried and it does not help when I enable the windows live plugin and try to search... Numbers still... Dang Google plugin works fine though
Click to expand...
Click to collapse
Weird.. Google plugin doesn't work for me. Do you have the 20-key? If so, it sounds like that CAB automatically enables ABC keyboard. Maybe they can make a CAB that enables XT9 by default. Who did you contact or where did you go to get that CAB?
Hi
I have one of those ipaq foldable keyboards (bluetooth) and I'd like to get this working on Windows Mobile 6.1 to use it on my touch diamond.
The original driver which ships with the keyboard doesnt appear to work on Windows Mobile 6.1 (I think its designed for 2003) but it seems the bluetooth layer is working perfectly....
The keyboard itself presents itself as a bluetooth serial port which can be paired and connected to the touch diamond... problem is how to get the serial port used for keyboard input
Any ideas?
Thanks!
Solved
I've developed a small application which wraps the serial output into the API.
** EXPERIMENTAL ** USE AT OWN RISK **
1. Ensure you have NETCF 3.5 installed on your device.
2. Extract the .exe file from the zip archive and save it somewhere on your device.
3. Pair your keyboard via bluetooth.
4. Create an outgoing serial port (any port from COM1 through COM9)
5. Fire up the saved application.
6. Select the COM port used in #4 above and click on CONNECT - If the connection fails exit application and repeat from step #3
7. Test connectivity by pushing shift/caps lock.
Can't get this to work
Hi there
Tried to install this on an HTC Touch HD and it doesn't work unfortunately... I get an error message but apparently need to install a special cab file from microsoft containing .NET CF 3.5 error messages?
If you feel like having a go at getting this to work would very much appreciate it!
ONLawson said:
Hi there
Tried to install this on an HTC Touch HD and it doesn't work unfortunately... I get an error message but apparently need to install a special cab file from microsoft containing .NET CF 3.5 error messages?
If you feel like having a go at getting this to work would very much appreciate it!
Click to expand...
Click to collapse
Hi
You just need to install .net framework 3.5 and it should work
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
lilitz said:
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
Click to expand...
Click to collapse
I will amend the application to enable you to specify a COM port.. unfortunately this can only be done when I am home so check back in a few hours....
lilitz said:
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
Click to expand...
Click to collapse
I've updated the application and the connection process as can be seen in post #2.
Great work!!! It works perfectly.
Only two questions:
It's possible to hide the win keyboard screen?
Could you add -in a future- a key repeat?
Thank you very much!
lilitz said:
Great work!!! It works perfectly.
Only two questions:
It's possible to hide the win keyboard screen?
Could you add -in a future- a key repeat?
Thank you very much!
Click to expand...
Click to collapse
I'll add keystroke repeat at some stage but its beyond what I originally anticipated so dont hold your breath until then
Some of the special function keys dont function yet either but as they are not really used it didnt make sense to add them initially.
Finally I got the keyb screen hidden, but if I hide it, the space bar key doesn't work. Otherwise this app is very very very usefull .
Andret: Did you try to install Widdcomm Broadcom Stack on your Diamond? I readed somewhere that there's a version compatible with HTC Hermes, I don't know if it can be used with your phone....
I tried to contact with darfon (without response yet) to ask them for the service manual of G950, I disassembled the keyb and there's a jumper connector in the motherboard, I wonder if it's possible to turn it into HID soldering a bridge there...
Greetings and thanks again.
lilitz said:
Finally I got the keyb screen hidden, but if I hide it, the space bar key doesn't work. Otherwise this app is very very very usefull .
Andret: Did you try to install Widdcomm Broadcom Stack on your Diamond? I readed somewhere that there's a version compatible with HTC Hermes, I don't know if it can be used with your phone....
I tried to contact with darfon (without response yet) to ask them for the service manual of G950, I disassembled the keyb and there's a jumper connector in the motherboard, I wonder if it's possible to turn it into HID soldering a bridge there...
Greetings and thanks again.
Click to expand...
Click to collapse
I dont have an issue with spacebar when I hide the popup keyboard.... I do occasionally get an issue when the spacebar doesnt work but I havent figured out what the reason for this is.... it seems to be rather random 1 out of 20 or so times I connect/reconnect the keyboard.
I've never opened the keyboard but I too have wondered about getting it into HID mode since it seems some of the later ones from HP support both HID and SPP.
I've never tried instaling a different type of stack on the phone... the app works fine as it is on my wife's diamond and was originally developed on my touch pro actually until it worked and then off to the diamond... not much use for it on the TP as it has a hardware keyboard.
Thanks!!!
This driver works great! thank you for the effort that you put into it! A friend gave me a Palm Universal Bluetooth Keyboard, and I used your driver to connect to my iPaq 110. Thanks again!
How do I create a COM port?
The Shift 1234567890 and .
Sorry for shamelessly bumping an old thread (well about a month)
These ([email protected]#$%^&*()>)
keys don't work for whatever reason. GREAT program by the way. I know my way around c, c#, etc so if you released the source, I might be able to get these to work.
Thanks!
Rob
idlacrosseplayer said:
Sorry for shamelessly bumping an old thread (well about a month)
These ([email protected]#$%^&*()>)
keys don't work for whatever reason. GREAT program by the way. I know my way around c, c#, etc so if you released the source, I might be able to get these to work.
Thanks!
Rob
Click to expand...
Click to collapse
Source code attached including ipaqkbmap which is a small application i used to determine the codes for the various keys... if you follow the source you'll know why this was necessary.
In my case i dont think it was necessary to map those special characters as the WM API managed some of the shift-state issues and did not require anything further....
Either way... free to play with it and see what comes out of it... Have fun
P525
Hi!
I have a ipaq foldable keyboard!
It the words are working but te funcion buttons doesn't.
I've installed the hp driver but when I want to enable in the program the keyboard :Couldn't open port COM1:.rc=55
Any ide?
How can I make an outgoing serial port (any port from COM1 through COM9)?
Thx
Asus P525 WM5
Thank you .. you are a star
I have a kaiser with wm6.1 and an HP ipaq (darfur 950) foldable keyboard .. heres what i did
- download IPAQKB.exe into storage card
- download HP update 2.0.0.8
- used activesync to update wm6.1 with update 2.0.0.8
- download .NET framework 3.5 compact from (http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en)
- open active sync and then run .NET application but make sure you chose 'custom' installation and put destination as :C\Mobile Device
- use bluetooth programme (start>settings>connections>bluetooth) to find foldable keyboard and tick serial port and also set COM 1 plus untick secure connection in the 'COM port section'
- run IPAQKB and select COM 1
- run foladable keyboard on in Programmes of wm6.1
- tick enalbe keyboard and thats it
p.s my code for keyboard was 0000
Here is the driver for WM6 WM5
Please follow the instruction for installation in the readme file.
Should run on any wm6.
test the hp ipaq bluetooth foldable keyboard with my htc diamond and working great.
Softkey Shortcuts
Does anyone know the shortcut or keyboard combination for Left and Right Softkeys with HP Foldable Bluetooth keyboard? Tq
Thank you so much for this small application. I have been able to pair HP BT keyboard with my HTC Touch HD and it seems to be working fine in Phatnotes. Will save me having to buy another keyboard.
Regards