Related
Hi there guys.
I really need some help. I've tried everything but can think of anything else to do anymore.
I have a i-Mate Pocket PC with Windows Mobile 2003 (not SE). My Desktop PC has got Windows XP with SP2.
I'm trying to send files via Bluetooth from my Desktop PC to my Pocket PC but I get this error message "FTP service not found on target device"
But if I send files via Bluetooth from my Pocket PC to my Desktop PC it works perfectly.
Please guys, if anyone can help me I will appreciate it. I am really tired of taking my SD card out all the time to put it in the card reader or taking the Pocket PC out of the Case and put it in the Cradle.
Thanks in advance.
in my pc bluetooth i can add and remove com ports
when i add com ports i have to deside if they are outgoing or incomming
if i want to send to the xda it would require the port to be outgoing
and of cause the xda would have to have an incomming port enabled
and of cause have turned on recieve beam enabled
try that
Thanks for your help. I get a error that my Pocket PC does not support file transfer.
Can you believe that??
well i havent tried it from a pc but i have tried it from a cellphone and there it worked ok
I don't understand why it doesn't wanna work. My P900 that I had before could send and receive files to and from my Desktop PC via Bluetooth.
Isn't there any software availible that you can install on the Pocket PC for file sharing or file transfer or something?
Where can I go to change my Com ports??
i just tried and it works ok for me
i had a txt file on my desktop and right clicked on it and choosed send to
and picked bluetooth device
and found my pda
and press'd send and my pda said if i wanted to recieve the file and i said yes
i dident add any outgoing com ports
to my bluetooth pc settings
i just turned on my bluetooth on my pda
and made sure i had made it recieve all beam files
Yes, that is how it is supposed to work. But mine doesn't. That's why I say, I can't understand it.
It should be straight forward.
when you go into settings and pick bluetooth settings
have you checked both the inbound com port
and the outbound com port ?
and of cause the Receive all incomming beams in beam under connections
Yes, I did that.
and do you use both the ms bluetooth software on the pc and
use the bluetooth stack on the xda ?
and does stuff like activesync works ?
i'm still on 1.66 rom
and i use ms bluetooth stack
and the driver that xp sp2 auto installed
I don't have the bluetooth stack. Where can I find it?
It's all in the com ports ! Go to pc right click my computer - go properties - hardware - device manager - look for your ports "com " 3/4 the way down page - expand then right click on your 2 ports one at a time - click com port tab then change incoming to com 4 then the same to t e other one but set to com 5 - open active sync - click connection settings clIck on com port 5 then open active sync in ppc tab " connect via bluetooth - should auto fire-up active sync if it does you should now be able to send n recieve ( good luck took me nearly a month to sus it out ) be very wary about the stack thing I dont have it - dont need it xp sp2 handles it fine.......
Looper T
Com ports
On my computer, I found that I would have to terminate the processes WCESMgr.exe and or wcescomm.exe and then go to device manager, Ports, disable Com 7 and 8 (yours may be 4 and 5 etc), re enable them, open up Active sync and then the Com ports were usable again and active sync would work just fine via bluetooth until I had to reboot my computer again.
This may just be my computer though... Or it could be that when the bluetooth and ActiveSync try to get going at boot, the bluetooth virtual com ports are not ready when active sync starts. I also disabled active sync from starting and I continue to block it's attempts to get back in the start up in the registry. Both Spybot, www.spybot.info , and Lavasoft's Ad Watch, www.lavasoft.de , will do that.
Piesang said:
Hi there guys.
I really need some help. I've tried everything but can think of anything else to do anymore.
I have a i-Mate Pocket PC with Windows Mobile 2003 (not SE). My Desktop PC has got Windows XP with SP2.
I'm trying to send files via Bluetooth from my Desktop PC to my Pocket PC but I get this error message "FTP service not found on target device"
But if I send files via Bluetooth from my Pocket PC to my Desktop PC it works perfectly.
Please guys, if anyone can help me I will appreciate it. I am really tired of taking my SD card out all the time to put it in the card reader or taking the Pocket PC out of the Case and put it in the Cradle.
Thanks in advance.
Click to expand...
Click to collapse
Have u ticked the "receive all incoming beams" in the settings->connections tab ? Cos if u unticked that, u will not receive any files from any computer or smartphone.
...
This is the problem with the MS Bluetooth stack. This software has no FTP service. I've installed the Broadcomm BT stack and now it's working except 1 thing described here:
http://forum.xda-developers.com/viewtopic.php?p=173928#173928
You can send any file via BT from your computer with ActiveSync. Normally make a AS connection via BT and simply browse your device on a PC. Or you can send it also without AS. Just click on My BT Places on your desktop,open your paired Himalaya and drag-and-drop your file to this opened window. You need to be in discoverable mode and the beams-receiving is turned on on your PDA.
Dear all, is that possible to activesync mini and pc without USB? Whenever using usb to sync, mini will be charged. Can i prevent this auto charging problem coz lets say the battery in my mini is always full, will it do any harm when it keep charging whenever we activesync? If we can activesync using BT, what is the procedure?
Just go to bluetooth settings and do activesync setup. you will need to re pair your PC. works really well.
rmg, what do u mean by repair the pc, can u provide me with more details and step on doing this, appreciate your help thanks
rmg, i did what u told me, but when i click start button on the "bluetooth activesync setup:" the message box come out "please start bounding with other bluetooth device which support serial port or activesync profile as your activesync partner". i cannot get it done, can u help
how i do is it
1) bond PC and Phone in Bluetooth Settings in windows
2) on phone go to Activesync - tools - Options - Options - Dropdown box
Eather Bluetooth or 19200 default
3)Open active sync pc
4) Active Sync on Phone - Tools - Connect Via Bluetooth
and that is how i connect
In the advanced settings for your BT dongle you will need to check what Bluetooth Serial port number is being used. I found mine under local services. Once you have that go into the proerties for AS and where it lists the serial port to use put the COM Port number of your BT Serial port in that box. Now when you hit the AS button they should be able to connect with each other. Hope that helps.
One of the requirements is for you to have a ActiveSync 3.8.
Once you have that installed a new port will also be installed with the Windows BT stack. When the BT stack is detected a new port will also be available.
Now the next step is to go to the PPC. Hit Start go to Settings, System and then Blue Tooth Settings. Hit the Start button and it should bring you to the BT activation where you turn it on. Have everything checked. Once this is done, start pairing the laptop by having it detect the PPC and set a passkey for protection. Once they are paired, launch ActiveSync in the PC and go to File and Connection Settings. Once in this screen pit a check mark on the Allow Serial... Set it to the new port set by your BT Stack.
Once this is done, on the PPC, hit Start and go to Programs select ActiveSync. Hit Tools and then Connect via Bluetooth. This should then start working.
One bug I did find is that once you connect your device to your charger and initialize the ActiveSync over BT everything will work well. BUt once you remove it from the power conenction, your device will soft reset.
ok i will try, thanks to all of you
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
@MC_Oliver
The answer is yes. If you are doing ActiveSync over Bluetooth it is the same as ActiveSync with a cable. You should have the same icon on the top of your screen. You can even browsse the files in your PPC.
Thanks dre.
Btw, curious if you have the same problem as I do in this thread? Thanks again.
mc_oliver said:
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
Click to expand...
Click to collapse
Is my question stupid? sorry about that coz i am new
mouse said:
Is my question stupid? sorry about that coz i am new
Click to expand...
Click to collapse
No, not at all. I cut my sentence short and it should have read; I have a stupid question. Sorry for the misunderstanding.
it seems that HTC 8125 not a plug and play device for my laptop. do i need to install activesync in my PC? then if it is installed already.. do i need to run activesync in my phone and in my laptop?.. i am in few steps to unlock my phone... im a newbie in technical like this. i usualy use my phone for noob use.. call,mails,sms. not repairing my phone...
if you install eveyrthing by default, after installing activesyn on you pc, your phone should be relatively P&P.
expanded direction
Principe,
Disconnect your Wizard from your PC.
Once you've installed Activesync on your PC and started the App.,
in the settings or options in Activesync(PC), make sure you've enabled "connect via USB" and to "...sync when a device is connected".
Now quit Activesync(PC) and connect your Wizard to the PC with the USB cable.
Activesync should start and find your device.
You don't need to manually start Activesync on your phone; at least I haven't.
If you have bluetooth, you can sync that way too, but you'll need to have WiFi and/or phone radio OFF for it to work.
Detailed Bluetooth sync instructions are elsewhere on this forum.
good luck
R
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.
I runs Winodws Mobile 6. 5 have activesync 4.5 on XP & WMDC on Win-7 installed on my PC. I can connect and sync my device with no problems, but how do I disconnect it? I do not see "disconnect" or "eject" device in the Activesync software on my PC or on the activesync menu on my handheld device.
If i disable Titanum and set the Today screen i get the the active sync icon on bottom of the screen but in titanum theme im not able to get it.
Pls suggest any option of Disconnecting activesync connection on phone or PC.
Thnaks
Hi
when you are on the a sync connected screen, hit the menu button and you'll see "disconnect"
tito12 said:
Hi
when you are on the a sync connected screen, hit the menu button and you'll see "disconnect"
Click to expand...
Click to collapse
Hi,
But this disconnect option comes only when I connected to active sync via bluetooth connection, not when i connect through USB cable.
premsoni4u said:
Hi,
But this disconnect option comes only when I connected to active sync via bluetooth connection, not when i connect through USB cable.
Click to expand...
Click to collapse
In Sync mode you don’t need to disconnect anything. Straight away remove your cable, after your transfers obviously.
And if you’re in disk drive you can disconnect by ejecting that particular drive for my comp.