Hi All
I have a new XDA II and would like to connect over my ISP (UUNET http://global.mci.com/about/network/pops/) with an ISDN number to UUNET and from UUNET over VPN to my coprate network. I have my VPN IP number and the Group-Authentication code. With my Notebook using Cisco VPN Client 4.0 its works well.
Any suggestions would be good.
Thanks and regards
JFK
Which type of VPN do you use?
PPTP is apparetly more reliable than IPSec (an O2 article I can no longer find stated this). One of the conslusions was that neither was very reliable, especitally if your moving. So if you get it to work, don't move!
Other than that, just ensure you are connecting to the right server and all your settings are correct.
Ben
you may try ncp vpn. It have PPC version.
supposingly you could connect to cisco VPN with it.
www.ncp.de
The wireless network in my office is Cisco, and we use LEAP protocol, please somebody could explain me how to configure LEAP in the JasJar, thanks
Please somebody can explain me how to configure my JasJar to work with Wifi Cisco LEAP ?, the menus are there but I do not know how to make it work, thanks
Cisco Leap
News on this subj?
Hi there
I have an XDAIIs with a GPRS connection, I can access my company emails
I want to connect to my work VPN to access the network
I have set the VPN ip address in my work connections, when I select connect to my VPN it dials my GPRS and connects but doesnt call the ip address
Any ideas what I am doing wrong or what I should be doing?
Regards
Tim
throw ipsec away and use openvpn and brand new openvpn for pocketpc port...
Trust me... it's well worth the try (and it's opensource!!!)
Bye
Drakpz
Hi,
I am trying unsuccessfully to connect to a PPTP VPN using the VPN client built into my new HTC TyTN II.
Wifi - I can connect using a WinXP SP2 laptop using wifi through my home linksys wireless router (which has PPTP passthrough enabled) using the standard Win XP vpn client. When I try with my TyTN II, I can browse ok but if I set up a VPN connection I get "VPN server problems. Verify your username and password, etc"
GPRS - If I try to connect over GPRS, I connect to Orange GPRS but when it tries to connect to the IP address of my VPN server, I get the same VPN server problem error message. (As a side issue, I asked Orange to enable my account for vpn which they did, sent a SIM update and told me to change my apn to 'internetvpn' instead of 'orangeinternet')
As I can connect through my wifi connected laptop, it seems to point to my WM6 vpn client but my forum searches suggest that the WM6 client works ok. Oh, and yes, I have checked that I am using the correct vpn username and password!
Any thoughts greatly appreciated - the ability to maintain some linux servers was my main reason for getting this phone!
_______________________________________________________
Phone - HTC TyTN from Orange
Windows Mobile 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
Processor QUALCOMM MSM7200-400MHz
Memory 101.63MB
Setings Device Information Version
Operator version 24.181.1.612
ROM Version 1.81.61.2.WWE
ROM Date 09/20/07
Radio version 1.27.14.32
Protocol version 22.45.88.07H
Bump!!! Same problem here. I have all the proper ports open on my router and still no luck.
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
WM6 don't connect to VPN over GPRS/ WiFi
Friends...
I have the same problem... the VPN server is Windows Server 2003... My PDA has WM6 (with in-build VPN client)... then VPN PPTP would work OK... but What is the wrong??
Regards...
I also could not connect on vpn over GPRS and got error message, but after I tested all installed programs I have found out that my SPB GPRS Monitor was the reason for the errors. So I killed it.
Now VPN over GPRS connects and looking into register I see that I am really connected i.e. I got DNS server IP, I got name of the local network and dynamic IP for my HTC, but nothing works. As I have found out from server guys they see me but my dynamic IP is not logged in server DNS, so no program sees me and I can not work.
Can somebody help?
Same
I have a similar problem but the difference is that i don't even receive an error message. When i click connect NOTHING happens!! The wifi i am using is an open network but I must connect to vpn to connect to the internet.
Please help as i really need to get this working...
I have been trying to iron this out with IT at my office as well. I have been trying to get WM6.1 VPN working for nearly a year.
I have a TyTnII and my IT office just bought some kind of WM6.1 Motorola/Sprint Smartphone as well which they actually asked me about setting up for them.
The problem what I am experiencing is that I CAN connect to the VPN server (I use one of the TaskMan progs that has ipconfig built it, and I am getting an appropriate IP from the VPN server). BUT I can't browse ANY intranet sites via PIE or Opera Mobile 9.5. Whenever I try to browse to an intranet site I just get nothing, browser does nothing for ~10min then gives timeout error.
I have heard that this has to do with an inbuilt error in the PPTP module of the VPN client that incorrectly makes VPN server requests using the IP address assigned by the GPRS/EDGE/3G/etc. connection rather than the IP address assigned by the VPN connection, obviously will cause problems!
Anyway, we are investigating 3rd part VPN clients...
Only IPSEC works
I also made many tries to get vpn working over BT PAN profile.
The only configuration which worked for my was IPSEC with the Safenet SoftRemote-LT Client on PC.
With the windows native pptp based vpn does not work .
I got the error code 721 what means that the GRE protocol (frame type 47 on port 1721) does not pass through. This seems to be the the real problem of the packet filtering components of the WM device. The problem is not related to bluetooth or PAN Driver, because it behaves in the same way if you try to do it over USB port. No way.
You guys might want to check out my post about getting my PPTP VPN working and actually syncing ActiveSync on a fixed schedule regularly over VPN.
http://forum.xda-developers.com/showthread.php?t=428878
Getting what you want to work over VPN requires work URL Exceptions so that the traffice is properly routed.
nkitson said:
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
Click to expand...
Click to collapse
Watchguard does support PPTP, your IT guys just need to configure it. As for IPSec which would be awesome because there is an app call Greenbow that will connect you over 3G doesn't work with Watchguard. You can only connect using their own client for it which needs a license and isn't support on Windows Mobile. They got a hate email from me for that crap.