Iam using O2 Xda II mini when i was updating my phone suddenly my computer shutdown and after that i cheaked my phone its GSM part is not working i try so many time to update radio rom but its not updating but rest phone system is working properly and updating also Plss help me to over come from this.
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...
Hi guys...I know there have been numerous reports of this kind, but I can't seem to find the answer.
I don't have this problem myself, but another person does and I thought I'd ask Olipro and the rest of the community for some help and clarification. Also hoping this answer can help anyone else who has this issue.
OK, Someone tried to flash WM6 before using the Unlocker. I know...don't say it. Anyway they now have the black screen of death and the tri-coloured bootloader screen, but are still unable to flash WM6 and obviously cannot use the unlocker until they have an O/S to sync with.
Has anybody encountered this and received incorrect vendor ID and found a way out of this scenario? They have an Austrian T-Mobile Ameo UK, so they can't even use the T-Mob 005 ROM for the UK Ameo (which doesn't require the unlocking of ones device).
Any clues peeps? It would really help a fellow owner out. Cheers for any input. Remember even if you said it before and don't want to repeat yourself again, please just cpoy & paste the answer here so it can act as part of the wiki for future incidents of this nature.
Thanks friends.
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
royalmail said:
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
Click to expand...
Click to collapse
Thanks Royalmail. I'll pass it on.
Artemis New Radio 03.21.90
http://www.fs2you.com/en/files/660aee8c-2eff-11dd-99ec-0014221f4662/
I've just downloaded it.....
Will try in a few minuits....
Thanks
I was using 3.18.90, and will try this one and compare if U know that 3.18.90 was battery-friendly.
HI,
I wanted to test this GSM update, but wanted to know what are the exact steps involved in installing this. I am a newbie and don't have much knowledge of these things. I am currently using Artemis Touch 4.02Rom full with cube. Can you help ?
Pretty good on reception and better on battery too..
I have HTC Love and I flased this rom a day ago. Battery lasted more than a day with over 2 hours of talking and another 2 hours of music playback and solitire now and then... I am impressed. Would like to know about other's experience too...
Still need to test it for a couple of days before I can give my final comment on this Radio.
Thank you, brothers sharing the spirit,
Is RUU brush-pack?
Battery life is not good, and I am having "out of coverage" claims by my patients. So 3.18.90 is better.
My ROM is YuE 4.4.
not good
Battery is not good at all, it drains power with bluetooth in no time. I don't know without bluetooth head set, my previous one was much better.
I've installed it and will post my experiences soon.
I download and try. Thanks
TheMelin said:
I download and try. Thanks
Click to expand...
Click to collapse
I tried to flash the radio rom: 3.21.90, but it was stucked at 79% and the Rom Update Utility, gave me an error about: Image (.nbh) is corrupt.
I fixed this by using Pof's USPL Utility, which makes my phone SuperCID.
I just posted this info for you guys (newbie's in general) so that you dont scream and shout here at the forum that the radio rom update didn't work.
I will test the new radio rom (I upgraded from 3.06.90) in these days and post back my thoughts.
topsecret said:
I tried to flash the radio rom: 3.21.90, but it was stucked at 79% and the Rom Update Utility, gave me an error about: Image (.nbh) is corrupt.
I fixed this by using Pof's USPL Utility, which makes my phone SuperCID.
I just posted this info for you guys (newbie's in general) so that you dont scream and shout here at the forum that the radio rom update didn't work.
I will test the new radio rom (I upgraded from 3.06.90) in these days and post back my thoughts.
Click to expand...
Click to collapse
Topsecret: here such a newbie/noob glad to hear you were able to fix it, but how? I did try Pof's USPL, but still have a corrupt .nbh
Case solved, I was just too impatient, didn't wait for USPL to fully install.
I tried to install the radio rom instead of POF's nbh
________________________
I try, so I learn
if I fail, I just try again
where did you get radio rom 3.18.90?
is it somewhere to download separatelly?
duuri said:
where did you get radio rom 3.18.90?
is it somewhere to download separatelly?
Click to expand...
Click to collapse
See here...
http://forum.xda-developers.com/showthread.php?t=397939
Cheers
Error on loading
I have tried 3.18.90 and 3.21.90 loads but consistently get the error:
Error[270] Update Error
"The image file is corrupted. Please check your update utility"
I am running WM6 from the HTC Asia site
---
I should add that I get that error when using the USPL utility as well.
What am I doing wrong?
diogenesthesceptic said:
I have tried 3.18.90 and 3.21.90 loads but consistently get the error:
Error[270] Update Error
"The image file is corrupted. Please check your update utility"
I am running WM6 from the HTC Asia site
---
I should add that I get that error when using the USPL utility as well.
What am I doing wrong?
Click to expand...
Click to collapse
That was my problem too. I just copied the .nbh into a folder with another rom from Meschle. That one worked for sure. Moved the .nbh from Meschles rom, ran step2.bat and the radio rom installed without any problems.
Orbit Xda O2 with radio 03.21.90
After the upgrade, for every phone call there is an annoying hum and the battery is consumed very quickly. For me, 03.18.90 is better.
Ive used every rom which has come out and Im normally a firm believer of the newer the better but I have finally gone back to 3.08.90 and feel it is the best.
Which rom is best depends on your usage.
I am a light phone user but I have push email on so GPRS is always on. Here in the UK on T-Mobile 3.21.90 ate up battery and I could barely make it through the weekend before the battery died. The signal was also poor in areas with bad coverage.
3.18.90 was a bit better for battery and coverage but battery still went down really fast.
Went back to 3.08.90 as Ive used this before and was alwasy happy and I firmly belive for my usage its the best. Crystal clear sound, battery lasts 3-4 days, almost double 3.21.90 and when I enter an area with poor coverage the conversation can continue and it picksup the signal a lot quicker.
For those who dont use GPRS and push mail you most likely last quite a while longer and just so happen to recharge in that time so dont notice the drain.
ActiveSync disconnects from XDA Zinc
Hello there,
My Xda Zinc is not detecting the mobile network, for past 2 weeks.
I thought of upgrading my Radio ROM.
However when i start the installation process, it my phone screen turns off, and activesync disconnects. After few second i get an error message saying that my pda is not connected to cradle and the installation will not proceed,
As soon as i click cancel in the above scree, activesync reconnects.
I tried this with 2.18 version of Radio ROM too, but same thing happens with that too..
This may help you:
ROM: WWE_RM3070712
BOOT VERSION:070711200506
RADIO VERSION:V3.0.1.P13.MCP2_2007-06-20
BATTERY VERSION: 1.3
EXTENDED ROM VERSION: V2.8.0 2007-06-21
If you know a way to solve problem related to "no service"(plz look at this link: http://forum.xda-developers.com/showthread.php?t=416884
)as thats my ultimate problem
thumbava said:
Hello there,
My Xda Zinc is not detecting the mobile network, for past 2 weeks.
I thought of upgrading my Radio ROM.
However when i start the installation process, it my phone screen turns off, and activesync disconnects. After few second i get an error message saying that my pda is not connected to cradle and the installation will not proceed,
As soon as i click cancel in the above scree, activesync reconnects.
I tried this with 2.18 version of Radio ROM too, but same thing happens with that too..
This may help you:
ROM: WWE_RM3070712
BOOT VERSION:070711200506
RADIO VERSION:V3.0.1.P13.MCP2_2007-06-20
BATTERY VERSION: 1.3
EXTENDED ROM VERSION: V2.8.0 2007-06-21
If you know a way to solve problem related to "no service"(plz look at this link: http://forum.xda-developers.com/showthread.php?t=416884
)as thats my ultimate problem
Click to expand...
Click to collapse
Did you run USPL before?
Try to remove your SD card.
cheers
Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
****ingbull86 said:
Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
Click to expand...
Click to collapse
Try a hard reset, and if that does not work try flashing the ROM from the SD card...http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Good luck.
Thank you JR_de. i knew i was forgetting something. =)
Flash the stripped shipped ATT ROM before you flash a custom ROM.
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Just flash your device with new ROM.
Me too. Everytime when coocked new rom I have problem - the tom is totally unstable. I've tried everthing but problem is here again. Hermes is 6 months old. Please give some idea for this problem. Thnx....