Related
OK so after having problems connecting my XDA2s to my laptop via wifi to use it's ADSL connection, I began to realise it was a major issue for a lot of users.
Having covered almost all the threads here regarding PPC WiFi issues, I still am perplexed as to how the whole thing is successfully set up.
I concluded that it was virtually impossible; that the PC would not provide the PPC with an IP address so I would have to use some sort of application to manage the connection. However, yesterday for some reason only the omnipotent holy deities of the grandiose gods of WiFi would know, I had it working perfectly. For about 10 minutes, until I decided to disconnect to see if I could readily re-connect. My hopes were of course, dashed, and I have not had it working again since.
I have tried every combination of settings on both the laptop and the XDA to no avail, and have followed more threads and links than I can count on my fingers and toes. I've tried all the same settings I had when it was working (briefly) but still have no real success.
So basically, what's the deal with getting this damn thing working? Maybe what I need is a step by step idiot's guide on how to initially set up the wireless network on the laptop first, to make sure it has all the right settings? I'm using a Vaio running XP home (built in WiFi).
Has anyone completely resolved this problem yet? I would really like a solid, clean method of setting up the connection rather than stumbling through a million different combinations of settings and ending up with something hashed and unstable.
Many thanks for any help on this, I'm sure it's a tiresome subject for many.
......And as is always the case, as soon as you post about it you figure it out!
If anyone is still having trouble using their XDA2 to connect to a PC's ADSL via WiFi, ive got it figured!
RE: ive got it figured!
PLEASE HOW? I HAVE ALSO THE SAME PROBLEM HERE
THANKS
Me too. I have a XDA mini S.
I don't know what settings to put into the thing. I had it connected for a short while but when I went into internet explorer it started connecting to GPRS instead of WIFI to internet.
Clearly I haven't got a clue. The book is of no help either.
Any ideas?
Thanks
Think i'm connected to the internet. It doesm't seem to want a password although one is listed listed in the router. Just can't stop it going over GPRS instead of the wifi for intenet????
problem solved
Hi All
Ok heres what I did .
Connections
under my work network
set ,set up my proxy server to "this network connects to the Internet.
Then go to advanced
Under select networrks ,Network management,Set both to "my work network"
Network Card
Network adapters
"My network card connects to work
Then select the network card ie sandisk
tick Use specific ip address
type in 1 thats on your network ,It will connect but you wont be able to browse still
Then soft reboot
change from use ip adress to "server assigned ip address"
soft reboot
and bingo
when using the wi fi on the exec i want to be able to jump on one of the access points at uni, so i select one and of it goes but never connects. how would i get it to forget about that one and try one of the other ones ? because everytime i go to uni it keeps trying to get on that same access point without giving me the option to choose one of the others. any advice would be helpfull. cheers
It should auto connect to any which are available. It might remember the old ones info but as long as thats not about it wont connect to it (although it might say its trying to).
Are all the access points at uni open and unencrypted? Do you have a log in screen once you'r on the LAN, or you not getting that far?
Seems there are lots of Wi-fi problems this weather....
JAmes
spidersid
dont know your location but I tried my exec at birmingham UNI, and had the same issue, it kept trying to connect and then i tried it with my other halfs xda mini s, as soon as i hit connect it asked me for a valid certificate- had a word with somebody who had it working on his laptop he told me i need to speak to IT as they need to get it enabled wasnt to sure what the IT guy did on his laptop but im assuming installd some kind of certification-
My exec on the other hand was buggerd came home and it wouldnt connect to my home wifi, even when i went into wifi manager- settings- and delted the uni wifi nework after a soft rest it wasstill there so had to fomat the whole thing.
My other half was told she just needs her normal login username and password, i assumed that it should let you connect and when you open a web page it defaults back to your UNI page so you can log in, but never got that far.
good luck.
-- dont think they will leave the uni wifi network unprotected-
spidersid
dont know your location but I tried my exec at birmingham UNI, and had the same issue, it kept trying to connect and then i tried it with my other halfs xda mini s, as soon as i hit connect it asked me for a valid certificate- had a word with somebody who had it working on his laptop he told me i need to speak to IT as they need to get it enabled wasnt to sure what the IT guy did on his laptop but im assuming installd some kind of certification-
My exec on the other hand was buggerd came home and it wouldnt connect to my home wifi, even when i went into wifi manager- settings- and delted the uni wifi nework after a soft rest it wasstill there so had to fomat the whole thing.
My other half was told she just needs her normal login username and password, i assumed that it should let you connect and when you open a web page it defaults back to your UNI page so you can log in, but never got that far.
good luck.
-- dont think they will leave the uni wifi network unprotected-
got it going
hi thanks for the info
i got it working. all i did was click the orange icon at the very bottom ;eft corner of the screen it opens up a list of available networks. getting on the university network was surprising, i didnt have to do anything but when i lauch the explorer it comes up with a username and login which is the one i use to get onto a computer at uni and im off.
hope this helps get you online at uni
Hi,
My mini s seems to have a problem connecting to my home network. When i switch the wi fi on it searches but does not connect. I hard reset a coyuplke of day ago and switch on the wifi and it found my network then promted to enter key, which i did. The phone then connected no problem. No when i switch wifi on it doesnt connect. I go into network cards tab and look what networks are available and my network is there with available next to it but the options have all change (key be given out auto etc...) so i change them to the correct ones etc.. but still it doesnt connect? What i'm i doing wrong? I has worked in the past but not now. I have not installed and 3rd party software and my router is working fine (laptop downstairs works no problem off network).
any ideas
cheers
hi,
i just reseted my router and renamed my homenetwork and assigned a newwep key. started wifi on mini s and it connected straight away to the my newly named network. switch wifi off then on again and now it wont connect. it see's the network and says its available but wont connect. under the settings the network key has changed. it's defo a problem with the phone cus everything else works fine (laptop, psp). it's just not saving the network info???
and ideas???
cheers
think it could be because i've upgraded to o2 new rom??? Could somebody with the latest UK o2 rom please confirm that ther can connect to the networ?
cheers
This also happens to me with the latest O2 ROM.
What you have to do is to manually connect and perservere by going to Network Cards, tapping the network and then select Connect. It may take a few go's but it will connect eventually.
Report back how you get on.
You may want to set up your router to assign a fixed IP address to the Mini S's MAC address as well.
Sounds like the problem I've been having. I've also got an O2 rom and am having problems connecting to any wifi network, even though it worked fine the first time.
I've tried going to the network cards page and clicking connect, but it hasn't worked so far. talkingbollox - when you say 'eventually', how long are you talking?
I'll also try assigning a fixed ip address later, but my hopes aren't high.
when you say 'eventually', how long are you talking?
Click to expand...
Click to collapse
Sometimes 2 attempts, sometimes up to 20.
Persevere!
20! I probably tried about 10 times before I gave up. Surely this is a fault. You shouldn't have to waste so much time just to get a connection! :x
I tried MAC address filtering too but that didn't seem to work.
Do you think this is a O2 ROM problem or a hardware problem? If it's just O2, I think I might try a different ROM. Any suggestions which ROM to use?
My Mini S came already with the latest rom I think, and it works fine with my router (BT Voyager 2110)
Are you guys using the 802.11g reg edit?? Maybe thats why its not working, I actually did the hack before I ever turned on my wifi so I don't know if it worked without it. Try it My wizard connects with my router in G only 8)
Search the forum you will find loads of posts about it, and I think somebody has even made a cab file that does it for you, along with some speed tweeks that make your system faster.
It must have taken me in excess of 40 goes to connect last night.
Yes, I am using the g mode hack. My Voyager 2100 is set to broadcast in both b and g (i.e. mixed) mode.
I had the same problem... what I did was just entering the dns adress of my router.
So the ppc doesn't wait for the dhcp server to asign it .. it works great when surfing at home !!!
Hi guys. If you don't remember me - here's my story in a nutshell. I got a 8525 about a week ago. Since day one I tried and tried and tried but never managed to get the wifi working... (as you can imagine I am beyond desperate at this point)
Anyway last night I got thinking and decided to give it another stab. I hard reset, messed with the settings again...and this time manage to get a little further. My phone is now showing me as "connect to network", only problem is I get a message saying "Cannot connect with current connection settings. To change connection settings, tap Settings." each time I try to access anything internet related. I know I'm close especially since I'm actually connected now, I think it's just AT&T's rom doing everything it can to get me to use their networks (I'm on T-Mobile and don't have a dataplan anyway...).
Anyway can you guys think of what the problem might be? I'm so close I can taste it! Thanks.....
Bump... Anyone home?
where did you get your 8525? my wifi on my 8525 works perfectly fine, have u tried upgrading to WM6?
I have WM6 already. I got it off ebay. Everything is perfectly fine with it, it just doesn't want to use the wifi connection to get online.
Try a hard rest.
my 1st 8525 i got off ebay, and it worked great up until a few weeks ago, when the screen stopped functioning it just turned white, i called AT&T and they sent me a new 1 i just got it this morning and now, i cant make calls >.> it will ring then my phone will say i have no service when i have full service and the call will end. but my wifi is fine... did u use the WM6 upgrade that was released by AT&T
No thanks re: the hard reset. I've already done that... If I can't figure this out I'm going to sell my phone and steer clear of ppc phones. I like it, but I bought it for wifi and this is just getting ridiculous. I have tried everything. I've spent hours and hours on this. I've reset my router god knows how many times, played with security settings, reset my phone over and over to start over.....
The worst part now is that I know it's connected. The wifi aspect is fine. It's just the stupid phone not wanting to use the wifi connection for the internet.
Maybe someone with a 8525 and a Linksys router can post ALL of their wireless related settings for me.
Ekh
Yes I used the AT&T update.....
i use wifi and my linksys router, the 8525's range isnt that great u need to be within a few feet of the router to get good reception, im about 30 feet from mine and i get 2 Wifi signal bars and an ok speed. but try this
Start > Programs > Proxy Manager > Disable Proxy
then try to use your wifi, then go back and restore the proxy when your done, i think some 1 told me to do that because att uses that so u can use their internet service or sumthin
Thanks but I'm way ahead of you. I've already tried every piece of advice I've come across on xda. My last hope is someone elses detailed settings.
is your network passworded by a WEP or TKIP ?
It's WPA... My device has the password, and I added the MAC to my router table. It's connecting to the router/wifi...
...it's just that my device won't use the connection
* Sigh * Looks like another one of my please help me posts has gone dead...again...
olly666 said:
...it's just that my device won't use the connection
Click to expand...
Click to collapse
Your problem may be one of the following:
1. The wifi connection is specified as connecting to "work" and programs are set to use an internet connection.
2. The wifi connection is specified as connecting to "internet" and programs are set to use a work connection.
Nope that's not it. But it does remind me of something so thanks. I deleted all the connections seeing as I don't have a dataplan... I made a new connection called "Wifi". BUT, it's not like I can specify any connection for it so it's just blank (no connection specified). By this I mean the options for a connection are:
bluetooth, cellular line, cellular line (GPRS, 3G), Generic IrDA, Hanes...COM1. No option for wireless...
Does that help?
Check that your router is set to allow connections by devices with 802.11b, which the Hermes uses. Most default to 802.11g only.
It's set for b and g
Helloooo...?
Hallelujah!!!!!
People, I have WIFI!!!
Thanks to everyone who tried to give a helping hand... It's really appreciated.
For future reference to those who are suffering from the same problem - this is what seemed to fix it... I entered google into IE via it's IP address rather than it's name (open command prompt, ping google.com...). To my surprise the page quickly loaded. I then instantly realized that the problem was with the DNS settings. I opened up "Wi-Fi" in settings, went to the "Network Adapters" tab at the bottom and entered in the DNS addresses for "IEEE 802.11b/g...". If you need help with this just PM me (I consider myself somewhat of an expert on this topic now).
I thought I was never going to get online. There IS a god!
hey everyone,
i checked everywhere on the internet, looked a lot of places but i couldnt find the solution to my problem.
so... everything was okay this morning i was like updating my twitter,browsing, everything fine, internet working ect. and couple of hours later in the afternoon my network was gone! right now i cant MAKE CALLS, access internet and all that stuff. its like a tablet now, just accessing internet via wi-fi. everything else-like games&music- seems to be working perfectly well.
i did a soft reset& a hard reset. i also checked the settings from the phone section of the connection manager. it just cant find a network!!
help me?
What do you see when you go into Settings -> Connections -> Connection Setup?
Go to Settings -> Personal -> Phone -> Network. Change Network selection to Manual. The phone will do a search for available networks (this might take a few minutes). If you see your network then fine, but I am just checking if the phone can see any network, ie a problem with the phone.
yup, of course i checked those settings. it finds some networks but it cant select it.
thinking about it through the day, i came to think that it was a problem about the sim card. still not sure what to do next though :/
Have you not got a friend on the same network? Then borrow their sim and try that. If that works, then try yours in their phone.