This is a tip about pairing the Stowaway Travel Mouse with JASJAR through Bluetooth.
I bought the Stowaway Mouse, and like many others, I could not get the mouse to pair, even though I downloaded the latest driver specifically for HTC Universal (= JASJAR). The setup screen would go from "Scanning for mouse..." to "Initializing connection..." back to "Scanning for mouse..." and on and on until it reports connection failure. I tried multiple times with multiple soft resets, to no avail.
I read online that someone reported he was able to pair after a hard-reset. I didn't do that, because I already have a lot of customization on my unit. I was on the verge of giving up and returning the mouse.
Then something happens by accident. In discoverable mode (after pressing the Discoverable button on the mouse and click "Connect" on the setup screen), while the screen says "Initializing connection...", I pressed the "Discoverable" button again by chance, only to find that it caused the screen to change to "Verifying connection..." and a red square appears on the screen for me to click, just like what the user manual says. After clicking the red square, the mouse started working.
I tried pairing the mouse again, using the same procedure. It paired successfully for the second time, and the third time. So this procedure is re-producible. I did notice there is an optimal timing when you should press that Discoverable button again to make it pair.
I also have the Stowaway bluetooth keyboard working at the same time. I have to say that, with both a mouse and a keyboard, it makes Jasjar a lot more productive.
Another thing I noticed but am not 100% sure, is that by turning off the "Power Efficient Mode" for both the keyboard and the mouse, their bluetooth connections seem more reliable.
Arrow?
Can you see the Arrow on the screen of Jasjar when move the Stowaway Mouse?
Thank
since i bought JasJar i was using this powerful mouse... i solved the problem by paring the mouse than Uncheck HID profile than delete the whole mouse from Bluetooth list.... then try to connect throwgh the Software that came with the mouse .... it will works YaaaaaY :wink:
Re: Arrow?
van said:
Can you see the Arrow on the screen of Jasjar when move the Stowaway Mouse?
Thank
Click to expand...
Click to collapse
Yes, the cursor arrow appears whenever the mouse is connected. If the mouse goes into standby, the cursor will disappear. So whenever you see the cursor on the screen, that means the mouse is ready to use.
Re: Jasjar now can pair with Stowaway Travel Mouse (bluetoot
yyl said:
In discoverable mode (after pressing the Discoverable button on the mouse and click "Connect" on the setup screen), while the screen says "Initializing connection...", I pressed the "Discoverable" button again by chance, only to find that it caused the screen to change to "Verifying connection..." and a red square appears on the screen for me to click, just like what the user manual says. After clicking the red square, the mouse started working.
I tried pairing the mouse again, using the same procedure. It paired successfully for the second time, and the third time. So this procedure is re-producible. I did notice there is an optimal timing when you should press that Discoverable button again to make it pair.
I also have the Stowaway bluetooth keyboard working at the same time.
Click to expand...
Click to collapse
Maybe I should give it another try. I had also gotten the mouse to work only when I frantically reset the discoverable mode over and over again during pairing. Getting the keyboard and mouse to work at the same time drove me nuts, I was only able to do it once. I had about given up on this, can you advise what you think the timing is for resetting the mouse during pairing?
Re: Jasjar now can pair with Stowaway Travel Mouse (bluetoot
galt said:
Maybe I should give it another try. I had also gotten the mouse to work only when I frantically reset the discoverable mode over and over again during pairing. Getting the keyboard and mouse to work at the same time drove me nuts, I was only able to do it once. I had about given up on this, can you advise what you think the timing is for resetting the mouse during pairing?
Click to expand...
Click to collapse
I would say, wait about 1 second after the screen changes from "Scanning for mouse" to "Initializing connection", then press the Discoverable button again. The timing is not that strict. I believe you can get it working within two or three tries. You can pair the keyboard before or after pairing the mouse. Overall, the mouse connection seems to be less stable than the keyboard connection.
I also noticed that, after you power off Jasjar and the mouse, it is much better to turn on Jasjar first, and when Jasjar has fully woken up, then turn on the mouse. It is easier to restore the mouse connection this way (without re-pairing).
Oh my god, somehow this all worked. I'm using the mouse in safe mode, which is a pain in the arse sometimes when it leaves the mouse icon on the screen, but it's working, for now.
Big big thanks for the tips and inspiration to try this again!
I have a generic bluetooth mouse (www.omiz.net) which pairs and works perfectly fine with my EXEC, only thing is the cursor is not shown i can click around in Word Mobile etc and even scroll... but pretty pointless without a cursor.
I tried using it with the Stowaway BT mouse driver, no luck in pairing.
Unfortunately - I have only been able to get a generic driver for my manhattan generic mouse at http://cabfiles.net but it only works on WM2003SE and not WM5 - maybe we can convinec george to develop a WM5 driver .... :?
in case anyone has given up on this, it looks like the pairing issues might be solved in version 4.4: http://www.thinkoutside.com/support/Drivers.asp?ManufacturerID=17&ModelID=295
It seems like the pairing of both the keyboard and mouse goes much smoother now. I didn't need to reset the mouse connection while it was searching for the device, it just connected. Only problem I had was that the mouse gets a little laggy when using with a BT keyboard at the same time. This was in enhanced mode, not sure if safe mode solves that problem.
Does the mouse work in true vga mode ?
Does the mouse work in true vga mode ?
somebody please reply
does the mouse work in true vga mode ?
galt said:
in case anyone has given up on this, it looks like the pairing issues might be solved in version 4.4: http://www.thinkoutside.com/support/Drivers.asp?ManufacturerID=17&ModelID=295
It seems like the pairing of both the keyboard and mouse goes much smoother now. I didn't need to reset the mouse connection while it was searching for the device, it just connected. Only problem I had was that the mouse gets a little laggy when using with a BT keyboard at the same time. This was in enhanced mode, not sure if safe mode solves that problem.
Click to expand...
Click to collapse
Does someone knows if it is possible to make this driver to work/pair with MS BT mouse?
Related
New driver here:-
http://www.thinkoutside.com/support... Support/PPC5/En/dr/Think Outside ppc5 En.zip
Does it now pair easier with the Uni?
galt said:
Does it now pair easier with the Uni?
Click to expand...
Click to collapse
To answer my own question, yes it seems like the pairing of both the keyboard and mouse goes much smoother. I didn't need to reset the mouse connection while it was searching for the device, it just connected. Only problem I had was that the mouse gets a little laggy when using with a BT keyboard at the same time. This was in enhanced mode, not sure if safe mode solves the problem.
Hi,
I got a Palm Bluetooth wireless keyboard for Christmas but I can't get it working with my T-Mobile Ameo.
I have installed the keyboard drivers (http://www.palm.com/us/support/accessories/btwirelesskeyboard.html) and get a "wireless keyboard" icon in Programs. But when I click it and tick "Enable keyboard" the Ameo just hangs. The only thing I can do is take the battery out to reset it.
Anyone else found this? or fixed this?
The keyboard won't work via the normal Bluetooth pairing interface either.
Thanks,
Tom
Still no luck
I still haven't managed to get this Bluetooth keyboard working. Just thought I'd post some more details in case anyone was interested:
* Keyboard: Palm Wireless Keyboard (3245WW): http://www.amazon.co.uk/Palm-Wirele...4?ie=UTF8&s=electronics&qid=1199552934&sr=1-4
* Palm Keyboard software installed on Ameo: v1.1.0.2.
* Ameo OS: Windows Mobile 5.0.
Anyone know of a bluetooth keyboard that does work with the Ameo?
Replacement
I bought a replacement keyboard - It is the "Freedom Universal Keyboard" which I can report works ok with the Ameo. See http://www.tomfotherby.com/blog/ind...board-dec2007-christmas-present-from-grandpa/ for comments and installation instructions.
I ebayed the keyboard that didn't work (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270203021878).
I thought I'd post an update about the "Freedom Universal Keyboard" keyboard now I've been using it for a while with my Ameo. I no longer recommend it! There are 3 problems with it:
1) I have to pair it every time I turn my Ameo on and pairing is flaky (average of 10 minutes faffing around just to get a working connection). Pairing rarely works first time. You have to turn off other bluetooth devices. Sometimes I have to restart my Ameo multiple times. You get the picture.
2) You can't hold down shift to select text (vital for copy&paste).
3) The Home and End keys don't work (vital if you ever write long sentences).
Anyone found a good bluetooth keyboard yet?
i use the thinkoutside/igo bluetooth keyboard and mouse, i highly recommend them!!
the links below are to the direct website, but you can do a web search and find them much cheaper elsewhere.
the mouse
the keyboard
hope this works better for you, i have no complaints, enjoy!!
I'm trying to connect my Dell BT Keyboard to my Fuze. I go through the pairing process by using the passcode "1234" on the phone, then typing it into the keyboard and pressing enter, and it reports a successful pairing. However, in the list of bluetooth devices, the Dell BT Keyboard is listed under "disconnected" and when I go into it, it does not list any services as being available.
Is this keyboard just incompatible, or am I doing something wrong?
Thanks!
did your keyboard confirm connection? like blinking led or something?
Im using Logitech Dinovo Edge and it worked just fine
it works for me...
ginjopowder said:
did your keyboard confirm connection? like blinking led or something?
Im using Logitech Dinovo Edge and it worked just fine
Click to expand...
Click to collapse
No, the keyboard didn't blink, but when I put the passcode in incorrectly it errored out.
I've since given up, I'll get a different brand kb
anybody?
and if so, what model?
Just gave it a try with a MS Bluetooth Notebook Mouse 5000: connected & paired in about 30 sec. Seems to be working fine...
There are known issues with bluetooth in 4.2.1 (4.2 in general) and Google is supposedly fixing this in the next update. Its kind of hit or miss if you can get something to connect.
thanks for the replies
i've tried a speedLink Snappy BT mouse which is detected and pairs OK but otherwise does not work -- no cursor or buttons response.
i might try and get a microsoft 5000.
or just wait for the update!
I'm trying to get a sense of whether the following bug is only affecting me or other users as well. I did a full factory image flash of 6.0 and attempted to pair a bluetooth keyboard and bluetooth audio receiver. For the keyboard, it forces the other device to generate a pin that is then typed on the keyboard. I eventually got this to work, but the NP kept taking a while just to generate a code, and would frequently time out before I could send the code. Once paired though, it worked fine.
The main issue is the audio receiver, which has the simple 0000 pair code. When I type it in on the player (or any other number for that matter), there's no way to click next or proceed to have it pair. It just sits there until it times out.
Anyone else deal with this and/or find a workaround?
I just picked up 2 nexus players on sale at walmart and have been setting them up. I updated the first one to marshmallow before doing any setup and noticed something similar. I could not pair a microsoft bluetooth mouse i have, it would discover it and attempt to pair, first is says pairing, then connecting then a few seconds later says "could not pair". It doesn't ever prompt for a pin and I've tried several times. I was able to pair a ZAGG folio case keyboard I use with my nexus 10 tablet, it prompted me to type in a pin and that paired just fine. Interestingly, last night I picked up a Logitech K830 keyboard (really nice btw) that has a touchpad built in and it won't pair, same behavior as the mouse except it does prompt me to type in a pin on the keyboard, which it seems to accept but then won't finish pairing. Luckily it also has a wireless dongle I just connected via USB and that work fine.
On the second player I let it do OTA updates to 5.1.1 and the keyboard pairs up just fine. I'm going to see if after doing the update to marshmallow (and not wiping my data) if the pairing will still be there and work.
My thought was maybe marshmallow has trouble pairing with mice, or devices that have mice integrated. But it sucks your reciever won't work either. It would seem there's a bug.
Bump, I'm having issues pair a gamepad. It won't let me press "enter" to submit the pairing code
az93civic said:
Bump, I'm having issues pair a gamepad. It won't let me press "enter" to submit the pairing code
Click to expand...
Click to collapse
New update out, can anyone confirm this is fixed? I rather not format and setup again if it isn't fixed
Fixed problem pairing Bluetooth mouse on nexus player Android 6.0.
I found a fix. First of all I don't see an update on my nexus player as of today. But I could not pair the Microsoft mouse no matter what I try. So I replaced the batteries in the mouse with fresh and it paired and connected right away. I guess if the batteries are weak it can't pair.
kojak35 said:
I found a fix. First of all I don't see an update on my nexus player as of today. But I could not pair the Microsoft mouse no matter what I try. So I replaced the batteries in the mouse with fresh and it paired and connected right away. I guess if the batteries are weak it can't pair.
Click to expand...
Click to collapse
Loaded the latest img from Google. Still have the issue. I am unable to enter the ping for the Bluetooth gamepad. It doesn't take batteries but it has been fully charged.
Problem Solved, updated firmware on the Bluetooth controller
Am also on Marshmallow, bootloader unlocked on my Nexus Player - love the device btw - I have the Asus gamepad, a HP K4000 bluetooth keyboard and the nexus remote control all paired and functional. Tried to add a Logitech m557 bluetooth mouse and it starts to pair and then says it cannot connect. I have another bluetooth mouse and I get the same result with trying to pair it as well. Bit of a headscratcher - Any advice would be appreciated
TIA