i saw that the file format on my jam is wav. tryed to sync a wav file but it didnt work.
what file format can i use? (midi, wav, mp3)
if i have an mp3 on the storage card, can i use them as a rington?
thank's
Erez
i know for sure .wav and .mp3 are supported. i now use a .mp3 ringtone. put the file in /windows/rings/ and you can select that file as your ringtone. wouldn't hurt to try other file types.
fone_fanatic said:
i know for sure .wav and .mp3 are supported. i now use a .mp3 ringtone. put the file in /windows/rings/ and you can select that file as your ringtone. wouldn't hurt to try other file types.
Click to expand...
Click to collapse
.mid is supported also
fone_fanatic said:
i know for sure .wav and .mp3 are supported. i now use a .mp3 ringtone. put the file in /windows/rings/ and you can select that file as your ringtone. wouldn't hurt to try other file types.
Click to expand...
Click to collapse
Just a suggestion: create a windows/rings folder tree in storage (that is: /storage/windows/rings/) and put your ringtones there: you'll save many MB of precious RAM (especially if you're going to use MP3).
bye bye,
Isidoro
thanks for that tip. works great. but now another problem arises. i just installed nice start 2.5 and i want to put the windows sounds for log on and log off. i put the mp3s in windows rings and can't select them there. tried putting them in windows and can't see them when there in there as well. so i tried them in wavs copied them over to /storage/windows/rings still no luck. now i have them in the windows folder and they show up. but theres 4 of them totalling 1.02mb. do files for these notifications have to be kept in the windows directory? if so what files are supported that are smaller then .wavs? i figured .mp3s aren't supporeted. anyway if its only wavs then what are the exact specs of the speaker for the magician so i can scale down these .wav's so they're not as big?
Related
I have audio files of various formats which I wish to use clips from as ringtones. I notice that the preset ringtones are WMA format, & try making the file I wish to use into a WMA, yet my Xda2 still does not show it on the ringtones list.
What must I do to make an audio file on my desktop PC into a ringtone for my Xda2?
there is a program in the settings section system tab called "add ringtone" you can use that or if all else fails you can put your WMA file directly in the directory "My Pocket PC/Windows/" in your XDA.. then try looking at your ringtone list.. it should be there..
Neither work. ;_; The file is currently in windows, & add ringtone does not show it.
some people report that the xda's cant play all bitrate wma's try to see if you can play them on media player
EotW said:
I have audio files of various formats which I wish to use clips from as ringtones. I notice that the preset ringtones are WMA format, & try making the file I wish to use into a WMA, yet my Xda2 still does not show it on the ringtones list.
What must I do to make an audio file on my desktop PC into a ringtone for my Xda2?
Click to expand...
Click to collapse
convert your .mp3 or any other audio file using dpoweramp converter its freeware and then copy that .wma to \mypocketpc\windows\rings and paste it there, and then just open sound and notifications on your pda and select incoming call and choose that .wma that you pasted IT SHOULD WORK FOR SURE !!
regards
jeetz
or if all else fails, instead of converting your mp3's to wma, why don't you just convert it straight to wav format? that way you won't have any problems.. because one problem with the wma format ringtones is if you use it for the sms alert once it rings it wont stop (since it is long) even if you click on everything.. which sucks big time.. while in wav you can easily cut the song to the part you only want with alot of different wav editors..
Ring Tones.
Hi there,
I have an XDA II and I hv tried this great progrm Ringtone X this is available for download / purchase at www.mtux.com not only u can use wma files but also wav and midi files to set as ring tones. U can also set ring tones by group / individual contact or by phone No. great program. try it.
Success. ^_^ Realised the 'add ringtone' option didn't detect the WMA file, so used a WAV, then found the directory 'Rings' in Windows, & switched it for the WMA again. Found out it doesn't like mp3 files for ringtones, & that any files with foreign characters in their names (eg Japanese, etc) will not transfer.
Thank you all for the help.
Help is my middle name... heehee
The easiest way to get them working is to drop a wma into the rings folder, they should appear in the drop down from phone options after doing so (you will have to exit the options page if you had it open whilst transferring the file).
Any good sound editing program (nero wav editor, audacity, av music morpher) should allow you to load your file up, chop and change it and then save out as a wma. Try lowering the quality slightly to bring the file size down even further(wma should be a lot smaller than wav).
As for other sound notifications on the Xda, just drop a wav file into the Windows folder to add it to the appropriate drop down.
well i agree WMA is slightly lighter than WAV.. but if you're not too familiar with audio editing better use WAV and edit it with Audioblock as it has an easy interface or if you are an advanced user and wants to cut WMA better use Adobe Audition or the newer versions..
Hi,
I have MDA compact, and want to know is it possible to use mp3 or any song file as a ringtone.
If so, then how can i do this.
Please !!
Thanks
i think it is possible, i tried this in my i mate pda2k try it and tell us the result.
first use rescue registry which usually comes with rescue explorer then open HKEY_CLASSES_ROOT THEN MP3 THEN DEFAULT THEN CHANGE MP3FILE IN THE SECOND SQUARE TO BE WMAFILE THEN OK
PUT THE MP3 RING TONE IN FOLDER WINDOWS\RINGS
THEN TRY TO MAKE IT RING TONE
THX
MP3 as a ringtone
use this file and you have in the explorer-popupmenu the option "set as ringrone"
woolies said:
Hi,
I have MDA compact, and want to know is it possible to use mp3 or any song file as a ringtone.
If so, then how can i do this.
Please !!
Thanks
Click to expand...
Click to collapse
It is very easy and simple.
Copy your mp3 to My Device>Windows>Rings folder
Then go Start>Settings>Phone and select it as a ringtone.
I have MDA compact, and want to know is it possible to use mp3 or any song file as a ringtone.
Click to expand...
Click to collapse
Yes it is! The easiest way to do that is copying the desired mp3 file to the folder \Windows\Rings, than you can choose it as ring tone in the same way as the preinstalled tones (it appears in the same list).
If you like to have the "Set as ring tone" entry in the explorer context menu also for mp3 files (and not only for midi, mp4 and wma) do not the following registry change:
i think it is possible, i tried this in my i mate pda2k try it and tell us the result.
first use rescue registry which usually comes with rescue explorer then open HKEY_CLASSES_ROOT THEN MP3 THEN DEFAULT THEN CHANGE MP3FILE IN THE SECOND SQUARE TO BE WMAFILE THEN OK
PUT THE MP3 RING TONE IN FOLDER WINDOWS\RINGS
THEN TRY TO MAKE IT RING TONE
THX
Click to expand...
Click to collapse
First: if you want to copy and choose the file manually, you don't need to change anything in the registry!
But if you change the linked file type from MP3File to WMAFile, you are telling the system that .mp3 is a wma file (and that is definitely wrong). That works as long as the system has under \\\registry\HKCR\MP3File and \\\registry\HKCR\WMAFile equal entries for the used software to handle those files. But it's never a good idea to map different file extensions to the same file type except all these extension are synonyms and belongs to the same type of data (like .htm and .html). As soon as a user installs different players for wma and mp3 he will get into trouble.
So instead of mapping .mp3 to the type WMAFile it will be much better to add the missing context handler entry to the file type MP3File in the registry . (Only the entry is missing, the handler exists, we can use the one which is already used for wma, mp4 and midi, see below)
So lets have a look to \\\registry\HKCR\midifile\Shellext, \\\registry\HKCR\mp4file\Shellext, \\\registry\HKCR\wavfile\Shellext, \\\registry\HKCR\WMAFile\Shellext and \\\registry\HKCR\MP3File\Shellext and see:
the first 4 have a key named ContextMenuHandlers and all refer to the same handler, but there is no key named ContextMenuHandlers in \\\registry\HKCR\MP3File\Shellext. So copy (not move!) \\\registry\HKCR\WMAFile\Shellext\ContextMenuHandlers completely (with all subkeys) to \\\registry\HKCR\MP3File\Shellext and you have will have the "Set as ring tone" entry in the explorer context menu of a .mp3 file too (and not only for .wma, .wav, .mp4 and .mid files). And you preserve the possibility to link different players to .mp3 and to .wma files.
And don't be afraid, the context handler for "Set as ring tone" for wma is the same as for wave, midi and for mp4 so it will work well with mp3 files too because it doesn't care about the file content. It does nothing more than copy the file to the folder \Windows\Rings. (Ok, the message box is telling that the file also has been set as new ring tone, but on my Magician that is not true, it is still the previous tone active and I have to choose it manually)
use this file and you have in the explorer-popupmenu the option "set as ringrone"
Click to expand...
Click to collapse
That also creates the missing key but installs an additional handler and refers to it. I believe that these 100kBytes can be used better for other thing. As long as you are happy whith the way the systems handles .wma files (as ring tones) you can use the same handler for .mp3 files too and there is no need for an special "ring tone" handler for .mp3 files. But if you are afraid of modifying your registry but really want the context entry than this cab file is better than nothing.
Joe
ok. stupid newbie question...
how do i change the sound my phone makes when a message beeps thru to anything other than the bloody voice saying "you have new message"
also the alarm? can i make it an mp3 or WMA?
thanks- only had the phone 2 days.
MontAlbert said:
ok. stupid newbie question...
how do i change the sound my phone makes when a message beeps thru to anything other than the bloody voice saying "you have new message"
also the alarm? can i make it an mp3 or WMA?
thanks- only had the phone 2 days.
Click to expand...
Click to collapse
Sometimes it helps if you use the manual!
thanks for your helpful reply!!
Dont you think i have read the manual from cover to cover- it doesnt say where i have to put the files for it to be used as the alarm tone or the message tone!!
THANKS
MontAlbert said:
thanks for your helpful reply!!
Dont you think i have read the manual from cover to cover- it doesnt say where i have to put the files for it to be used as the alarm tone or the message tone!!
THANKS
Click to expand...
Click to collapse
Ok ok, put in /windows/Rings folder on your device.
it seems that you can only use .wav file format, is there any workaround to use .mp3, .mp4 or .wma files? wav audio format is so big it will be a complete waste of memory, btw. for alarms sound you must copy wav to \windows folder
Did you know that actual size of predefined .wav files in windows folder is almost 2MB and you can't delete it?
banesi said:
it seems that you can only use .wav file format, is there any workaround to use .mp3, .mp4 or .wma files? wav audio format is so big it will be a complete waste of memory, btw. for alarms sound you must copy wav to \windows folder
Did you know that actual size of predefined .wav files in windows folder is almost 2MB and you can't delete it?
Click to expand...
Click to collapse
you can use mp3 and mp3 has smaller Filesize than wav. just use a good converter and use low bitrate. you can also cut mp3 files as you might do not want the whole 5th symphony for a ringing tone.
yeah- i got the ring tone to be changed to my favourite Hatebreed song but for the life of me cannot get it to change the alarm ring tone to something other than those included with the phone..... i used to have an edited mp3 as alarm tone for my sony-ericcson..... i am assuming this phone is better and can do that.......
any ideas to change the alarm tone?
thanks
Scott
saminegm said:
you can use mp3 ...
Click to expand...
Click to collapse
Yes for ringtone but NOT for alarms and sms, if someone know how to do it please xplain ...
G'Day Guys,
You need to use .WAV files bummer I know as they are generally larger but it is the only way to use them.
Convert your MP3 files to .wav with a program such as Ease Audio Converter:
http://www.soft32.com/download_15987.html
Once converted, connect your phone to the USB Sync Cable and let is sync.
Once synced go to >my computer>mobile device>my windows mobile-based device>windows and place your .wav file in the windows folder.
It should convert the file for mobile windows format.
Then in your phone go >start>settings>sounds¬ifications>notifications>events and select event, then associated sound.
or for alarm
>start>settings>system>clock & alarms>bell symbol and select sound.
I found that the sound file for the alarm cant be too long, at 17 sec it wouldnt work at 10sec it would................ Again I used "ease Audio converter" to clip the length of the wav file.
Hope this helps, spent many hours delving around on the net finding the answers.
Regards,
BIQ
can this be stickied or put in the wiki under common problems with the Trinity? just an idea
LightInsomnia said:
can this be stickied or put in the wiki under common problems with the Trinity? just an idea
Click to expand...
Click to collapse
This is nothing to do with the Trinity as such- it is, and has been, universal with all Pocket PC/ Windows Mobile devices.
As the previous posters have said:
Ringtones can be WAV, MID, WMA or MP3 and need to be in the Windows/Rings folder. Later devices have other permissible locations, but Rings is univerfsal.
Other notifications must be WAV files, and preferably need to be 25KB or less. These need to be in the Windows folder, and are selected via the Settings/Sounds and Notifications control panel.
You can use MP3's as alarm, SMS and messaging tones, but you need add-on programs- SpB Time /Chronos etc for alarms, Ringo Mobile for SMS & Contacts etc.
Ok, I did a fast search and not sure what I am missing. I have some ring tones that I want to use and converted them to .wma, but have no idea what to do with them. I dumped them in the windows folder, but that did not work. What am I missing? Chad
All you have to do is copy the (I assume MP3) to a folder under my docs called Ring Tones then they'll show up in the settings under "phone." Just select the one you want and you're good to go. Enjoy.
Well I just tried that and I still do not see them. I tried the my documents on the storage card and on the rom. Am I missing somthing? Chad
Not too hard to do. copy the file into the file "ring" this will be in the windows folder on your device. Once there you should see it in the list for your ringtones.
chadman said:
Well I just tried that and I still do not see them. I tried the my documents on the storage card and on the rom. Am I missing somthing? Chad
Click to expand...
Click to collapse
What I do is copy any ringtone such as MP3 or WMA into the Sounds folder inside the Application Data folder in the root and it works.
Also if you want to assign special sounds such as Alarm sounds or music you can copy WAV files into the WINDOWS folder in the root directory and they will appear when you try to assign an Alarm sound.
Another thing that might interest you guys is that you can even assign special slide out sounds with a program that I will provide to you guys, but it must be in WAV format. ( you can always just crop a song and save it as WAV. That is what I do * editing program not available here)
Hope this answered your questions
[email protected]$ said:
What I do is copy any ringtone such as MP3 or WMA into the Sounds folder inside the Application Data folder in the root and it works.
Also if you want to assign special sounds such as Alarm sounds or music you can copy WAV files into the WINDOWS folder in the root directory and they will appear when you try to assign an Alarm sound.
Another thing that might interest you guys is that you can even assign special slide out sounds with a program that I will provide to you guys, but it must be in WAV format. ( you can always just crop a song and save it as WAV. That is what I do * editing program not available here)
Hope this answered your questions
Click to expand...
Click to collapse
That worked great! Thanks, Chad
I've been having some trouble setting a custom ringtone as an alarm on my X1. I have saved the file as a .wav and put it in the windows folder. It shows up in the drop down list, but when you select it, it automatically goes back to 'default'. Anybody know how to fix this?
what, anybody?
You converted it to a .wav or just saved it as a .wav ?
sounds like you might have the right extension, so it shows in the list, but if it's not a valid wave file it just goes back to default.
Xuanlong said:
I've been having some trouble setting a custom ringtone as an alarm on my X1. I have saved the file as a .wav and put it in the windows folder. It shows up in the drop down list, but when you select it, it automatically goes back to 'default'. Anybody know how to fix this?
Click to expand...
Click to collapse
Drag the .wav file into this folder \my documents\my ringtones
It is not necessary to use wav files
If you have a mp3 file, just drop it into your phone
Mopral said:
It is not necessary to use wav files
If you have a mp3 file, just drop it into your phone
Click to expand...
Click to collapse
Sigh.....don't listen to this dude....if you have mp3, you can't just drop it into your phone.
You have to put it in the ring tones folder...like I said....
poetryrocksalot said:
Sigh.....don't listen to this dude....if you have mp3, you can't just drop it into your phone.
You have to put it in the ring tones folder...like I said....
Click to expand...
Click to collapse
Yes, I forgot to say it must be in the ringtones folder
My alarm wont play MP3's.
I'm not having a problem with ringtones.
It's the alarm clock I'd like to play these sounds. In the alarm clock dropdown menu, the ringtones from the 'my ringtones' and 'sounds' folders do not show up. Previously, placing .wav files in the windows folder would allow them to appear there. And they do appear, but when they are selected, it just goes back to the 'default' sound (one short quiet beep).
The files are saved in .wav format. I've only been having this problem since updating my X1's firmware with the Sony Ericson Update Service.
Anybody know what to do?
I don't know if this works but try placing them in the windows folder, the my ringtones folder, and the my music folder.
I'm using a custom .wav file (converted the old SE Badbarber.MP3 to .wav) for the alarm and only had to drop it into the windows folder for it to show up in the list and be able to use it.
poetryrocksalot said:
I don't know if this works but try placing them in the windows folder, the my ringtones folder, and the my music folder.
Click to expand...
Click to collapse
Didnt work, but thanks for trying.