In pocket explorer options I can set the connection to automatically detect. Which means if I am active synced it will use my laptops internet connection, and if it is not it will connect to GPRS.
However, in the imap email options you have to choose either work on internet. So when I am activesynced I need to choose work, and when not I need to choose internet to get it to use one of the gprs connections.
Apart from this problem wm5 seems fine.
Related
Hello,
i have a qtec 9100 and for e-mails I use our company e-mail (microsoft exchange server over VPN).
I have the VPN conection already created but how can i turn it on when I need to syncronize e-mails or how should i configure my outlook so it would syncronize via "My Work Station" not via "Internet"?
Also I have a problem with wifi connection.
It is as unstabile as possible. Even when I sit next to wifi router it sometimes disconnects me and will not connect again.
Is there any possibility for me to upgrade the driver or what else could I do?
Marko
i dont have a problem with wifi and use it daily.
it can have performance issues if you wind back the setting to preserve battery, but I dont find it much of a problem at all.
in relation to VPN, a bug in this device that wasnt there before is a need to go into network settings and connect the vpn manually first, before it will work.
in relation to activesync, if your work is using 2003, there shouldnt be a need to use vpn, you should be able to use activesync via gprs/3g/wifi without a vpn, though I found that a bit unstable.
an alternative for email is to use "webmail" which is also possible on your device, but over gprs might be a bit slow.
not sure if you have encountered yet the need for the exceptions to be used for the IP addresses at work that you are using within the VPN settings
simon_darley said:
i dont have a problem with wifi and use it daily.
Click to expand...
Click to collapse
I still have the problem
it can have performance issues if you wind back the setting to preserve battery, but I dont find it much of a problem at all.
Click to expand...
Click to collapse
i have the settings set to "best berformance" - still doesn't work.
in relation to VPN, a bug in this device that wasnt there before is a need to go into network settings and connect the vpn manually first, before it will work.
Click to expand...
Click to collapse
can you please go step-by-step, i couln't find the "connect" button.
in relation to activesync, if your work is using 2003, there shouldnt be a need to use vpn, you should be able to use activesync via gprs/3g/wifi without a vpn, though I found that a bit unstable.
Click to expand...
Click to collapse
with active sync there is no problems, but I do not want to carry my computer with me all the time
an alternative for email is to use "webmail" which is also possible on your device, but over gprs might be a bit slow.
not sure if you have encountered yet the need for the exceptions to be used for the IP addresses at work that you are using within the VPN settings
Click to expand...
Click to collapse
that one (excuse my english - third language only) i didn't understan, can you please explain it, thanks
oki doki
firstly, is your exchange server at work 2003? you dont need to carry your laptop to access exchange server 2003 activesync with your PDA, you can do it direct to your PDA over the internet, if your server is so configured to allow external access to activesync.
exchange 2000 and 2003 also have the ability to publish all of your email, contacts, diaries over the internet via what is called WebMail, similar in nature to a hotmail account or Gmail account. This is done using Pocket Internet and allows access to everything, but your servers need to be configured to access the webmail. It will normally be a secured site, and is accessed in internet using an address similar to https://myservername.com.au/exchange. Then just put username and password.
To get to VPN, Start > Settings > Connections. Go to Connections, locate the area where you have placed your VPN connection, probably my isp, find the VPN tab, press and hold it, press connect. Yes, if you want talk about to many clicks, this is a very long way. You used to be able to do it via the antenna picture on the menu bar, but its gone now and I dont know how to get it back. Have you setup your VPN connection?
A bug in the device is that depending on the circumstances, you try to connect your VPN, it drops off when you try to use it, such as run terminal server or activesync over the vpn connection, it will simply disconnect. this is due to a stupied MS setup whereby it disconnects the moment you try to run any address that has a "." in the address over a "My Work" style connection.
Is your firewall stopping you from accessing the? What is the router configuration? Are you using WEP encryption? Broadcasting your SSID? or are you accessing the settings on your router and allowing a connection based upon named devices such as MAC addresses? Is it established as an access point with security or an adhoc connection?
Further questions, we may have t work on a PM basis if you dont know what these statements mean, and address them one by one, or pay an IT technician that is MCSE qualified to get this working in about 30 minutes.
Any tips? I'm sure I have everything set up perfectly, but it just won't download any web pages. Is there something i'm missing?
I can download my e-mails fine (Hotmail, and IMAP) but can't get any web pages open using eather IE or Opera.
Cheers
Try disabling proxy on your GPRS/EDGE connection first (take note of the settigns first). I haven't been able to do anything using Activesync Passthru.
It was allready disabled.
I've just done a hard reset, and it still won't connect with a fresh Activesync connection. Any ideas?
ACTIVE SYNC AND INTERNET
Under options in ACTIVE SYNC---you have to have THIS COMPUTER CONNECTS TO INTERNET .
Thanks, but it's allready ticked.
Anything else?
hi!
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
ACTIVE SYNC AND INTERNET
I've also had problems if my OUTLOOK inbox is set to my POP MAIL ACCOUNT (YAHOO). When I check outlook mail for some reason it connects.
Also--what are your connection settings to get to INTERNET for your GPRS and WORK settings unrelated to active sync?
Re: hi!
guitarman_08 said:
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
Click to expand...
Click to collapse
I don't get what you mean. What will this do?
Cheers!
hi
Well, matheprat im just guessing if this is right... but i have encounter this problem wherein i can't load any web page on my ppc..theres an option on tweaks2k2 where you can chage PPC IE as IE 6.0 Well It will not totally chage but it will make your browser pass like an IE 6.0.. just try and let me know if you've done it
Thanks for the reply. I tried doing the above, and there's no change, I still can't connect. Every time I connect the PPC to Activesync I get a message saying that it's unable to find a server assigned IP. Ive tried using a specific IP (my computers), and leaving it to obtain one from the server, but neither work. When it was connecting before, i set it to obtain an IP from the server.
I also can't update the weather info for SPB Pocket Weather, but I can check e-mails (hotmail and IMAP), and sign into MSN on the device.
k!!
k!!
hello,
I have few connections on my S200, (few apn's opened), one
for internet, one for email and one for corporate access. So,
I want that my activesync use email connection. Well,
how to tell Activesync to use email connection, not Internet
or corporate?? It always uses Internet...
thx
Use the CM_Mapping method - read about it on MSDN
I really searched hard, but couldn't find any solutions, neither in a german forum.
My TD2 can use the wlan for internet via topaz' integrated opera without a problem. But if it comes to adding mail accounts, I am not able to choose wlan as the connection to download / send mails (yes, all access data are correct, it's only that I can't choose wlan as connection). Due to obvious reasons, I don't want to use the regular networks of my phone provider. I just want to use my free wlan at home to send / receive mails. What to do?
Normally when a data connection is request, if pda has the wifi actived it first try to connect with a wlan. if it don't find an active wlan, then it connect by gprs or 3g.
if you want avoid the connection with gprs/3g it is advisable to disactivate it by the program Modaco Nodata.
Got it now, all worked well. But after I entered a complete mail account that worked, I entered a second mail account that I didn't configur till the end. Now it appears in the touchflo 3d, is not deletable and does also NOT appear in the WM Mail structure. It seems it only appears in the TouchFlo, which showed it again after deactivating/ enabling TouchFlo again. SKTools doesn't find it either. Dunno where to fin it apart from the registry, where can I delete it?
I have a Windows Mobile device 6.1 Pro.
I have Messaging setup to collect my personal emails from the Internet via my HSDPA connection.
I also have an account for my work email (POP3) which I collect via the company VPN.
This is my problem, and it's something I've lived with for a long time as I don't think it can be changed. Maybe you guys can help.
I open Messaging and switch to my work email account. I have the Network Connection set to use 'Work' Settings, and in the Work settings I have my VPN connection.
If I open Settings, Connections and click and hold on the VPN settings I can connect manually. Now I have a VPN connection and I can send and receive mail.
However, I want to be able to Send/Receive and for this to be automatic, so when I do this, if there's no 3G, it connects first, then the VPN connection is triggered, and the connection is established - however, in the mean time Messaging has gone off to try to find email from my work servers on the Internet, and always fails obviously. If I Send/Receive again, it connects right away as the VPN connection is already established from the first attempt. Email is sent and recieved as you would expect.
My problem is Messaging doesn't wait long enough for the VPN connection to be established, and although it triggers it, it tried to collect email before it's finished connecting, then I have to try again.
Or connect the VPN manually, but this is many clicks and not so User Friendly for staff who aren't so WinMo savvy.
Is there a way to have Messaging wait long enough for all relevant connections to be established before trying to find the mail server??