Hi every one! i have a jasjar, and yesterday I noticed that the master microphone (the one wich is between the word imate and jasjar, the one that you use when you are in the "pda mode") doesn't function: the other (the external one) and the vivoice work fine.
When I'm in the pda mode I can't listen anything, but the others can listen me....
I've found another person which has the same problem: we have the same rom (the only one italian), so I thinked it was a software problem.
Anyone can help me? thank you very much!
no one?
Do you mean speaker? The bit you hear other people speaking from?
Does anyone know if it switches between the outter and inner speakers when using the phone in different modes? if so, is it software of hardware switching?
Sounds like its dead if its hardware. Repair shop for you.
JAmes
yeah, I mean the speaker sorry for my english.
yes, it switch automatically... I think it's an hardware problem, yes I have the warranty, but they will give me my universal back in a month and an half...
Make sure there isn't any dirt in the headphone jack which might be shorting it out.
Make a call, and see whether you are allowed to press the 'speaker on button'
If you cannot, this would suggest a jack issue.
coldpenguin said:
Make a call, and see whether you are allowed to press the 'speaker on button'
Click to expand...
Click to collapse
sorry but I didn't understood... waht do you mean with speaker on button?
There are 3 ways:
1) Press and hold the green Make call button. After 2 seconds, the speakers should turn on for hands free mode
2) Press Menu and select: Speakerphone on
3) Press call status and then click Speaker On
Gareth
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
ly340077 said:
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
Click to expand...
Click to collapse
Does this Itech headset have a feature to allow quick switching between Home Phone and Cell Phone? Like you press a button on the headset and you choose the Home phone or Cell phone? Because my plantronics allows me to do so but I wanted to check this Itech headset out because many people are talking of it and i got recommendations to buy it.
Switching
I don't beleive so. Once paired to the device of choice it just allows call answer via the blue LED button. This button also acts as the activator for voicedialling when in standby, which is where the problem may lie? It's just confusing as when not using the blue LED button to answer a call the voicedial window still popo up when the call has ended.
Replies
Any ideas anyone?
Anyone here use VC1.6 with Bluetooth?
Has anyone else noticed that the confirmations don't work?
I've seen threads on other forums about this, but no solution yet over there.
Figured I'd bring it up in case folks here have the answers.
Basically, here's my conversation:
Press BT button
Device: *Beep*
Me: "Call John"
Device: "Call John?"
Me: "Yes"
Device: *Timemout Beep*
Now, the confirmation works when used on the device just fine.
When on the headset, its like it gives up without trying to hear me.
MS Voice Command v 1.6 works almost perfectly on my Sprint Mogul. It has one flaw - when the button you map is first pushed it does not give off the beep, but the small microphone on the top bar shows up. When the little mike shows up, you can say your commands and it works perfectly.
The next time the button is pushed, the beep is heard and the mike shows up.
Also, VC is activated by my Motorola S9 stereo BT headset. If I push the right button on the headset, I hear the beep and can give the command into my headset even if the headset is in my backpack.
The failure to beep on the first button push is a small problem I'm sure can be worked out. For me it is no problem at all. I just push the button and begin speaking.
I own many other HTC products and VC works as well on the Mogul if not better than any of them and I haven't even hacked it yet.
The problem only shows up when dialing a number from the BT headset and the confirmation is played back. It seems there is a problem with the mic after the confirmation is played so you can't reply "yes" or clarify. It works fine for opening programs or if the confirmation is turned off and you are lucky enough for it to hear you correctly
ImCoKeMaN said:
The problem only shows up when dialing a number from the BT headset and the confirmation is played back. It seems there is a problem with the mic after the confirmation is played so you can't reply "yes" or clarify. It works fine for opening programs or if the confirmation is turned off and you are lucky enough for it to hear you correctly
Click to expand...
Click to collapse
Yeah, this makes browsing media impossible!
I used to say "Play music" wait until it asks me what type to sort by "Artist"... wait again "Dream Theater"... and then the music would start.
Now, I can't get past the first prompt because the mic is shut off. Very weird indeed...
Voice Command 1.6
One thing that I've noticed with my S9 and 1.6 (wm6 but had similar issues in wm5) is that VC gets confused by the stereo headset, announcements will generally shut off the headset for a moment and come out of the phone speaker, if I hit the button on the headset, I will get the VC beep in the headset, but it seems to be listening to the mic on the phone, and if I hit the phone's activation button, the beep comes through the phone, but it then seems to be listening to the headset for commands. I've found no reliable way to 'straighten' this out, however, I did notice the other day when I reset my phone and used the 'play' button on the headset to reinitiate the phone/headset connection rather than initiating it automatically when I turned on the headset that it seemed to be functioning normally for the first time in a long time. I've not tried to reproduce that yet, but will try it tonight.
Traumtanzer said:
One thing that I've noticed with my S9 and 1.6 (wm6 but had similar issues in wm5) is that VC gets confused by the stereo headset, announcements will generally shut off the headset for a moment and come out of the phone speaker, if I hit the button on the headset, I will get the VC beep in the headset, but it seems to be listening to the mic on the phone, and if I hit the phone's activation button, the beep comes through the phone, but it then seems to be listening to the headset for commands. I've found no reliable way to 'straighten' this out, however, I did notice the other day when I reset my phone and used the 'play' button on the headset to reinitiate the phone/headset connection rather than initiating it automatically when I turned on the headset that it seemed to be functioning normally for the first time in a long time. I've not tried to reproduce that yet, but will try it tonight.
Click to expand...
Click to collapse
Scratch that, I wasn't able to duplicate this, so seems to be a random occurrence, I know that every once in a while it does seem to work correctly, but that's very rarely.
List of Voice Commands
Has anyone got a list of voice commands, and is there any way to add new commands?
My VC 1.6 bluetooth problem is even more frustrating. It always recognizes my contacts, but the confirmation doesn't work AND I CAN'T DISABLE IT!
I uncheck the confirm box on the VC settings, but it still tries to confirm.
Is there something I'm missing?
Sprint does it again
WM6 has voice command built-in, but Sprint decided to disable it and not make it part of the ROM, so when you install 1.6 over the already there application, is when you lose part of the functionality.
Ha! I found my voice command problem -- I had a duplicate contact.
What voice command said (even after I turned off confirmation) was "Joe Blough at Home 3 found" and then it displayed one of them. When I removed the duplicate and turned off confirmation -- IT WORKED!
Now, if they would just fix the confirmation to work properly...
Ok.....my problem is it will not announce incoming calls, no matter what i do...everything else seems to work fine, but it will not announce incoming calls threw the bluetooth nor speaker, am i missing something???
Bottom line: Voice Command 1.6 is buggy, and needs to be updated to work 100% with WM6. Start complaining to Micro$oft.
TC1 said:
Bottom line: Voice Command 1.6 is buggy, and needs to be updated to work 100% with WM6. Start complaining to Micro$oft.
Click to expand...
Click to collapse
It's not buggy at all, it wasn't made for use on WM6, it's for WM5, we're lucky it works as well as it does.
You can bet MS is already working on a new version, question is when will it be released.
Is there an echo in here? What part of "needs to be updated to work 100% with WM6" didn't you understand?
I was saying it isn't buggy as you said, it works great for the OS it is intended to be used on.
Funny enough, VC works great for me... The only issue I have is sometimes it does not play the first tone when I press the VC button...
Shaska said:
Funny enough, VC works great for me... The only issue I have is sometimes it does not play the first tone when I press the VC button...
Click to expand...
Click to collapse
It works fine if not using bluetooth. (aside from the missing first tone sometimes)
Dishe said:
It works fine if not using bluetooth. (aside from the missing first tone sometimes)
Click to expand...
Click to collapse
And also doesn't always confirm commands. At least from my experience.
primenall said:
It's not buggy at all, it wasn't made for use on WM6, it's for WM5, we're lucky it works as well as it does.
You can bet MS is already working on a new version, question is when will it be released.
Click to expand...
Click to collapse
I have the Alltel 6800 with WM5 and am experiencing the same problems as you WM6 folks.
It seems to be an issue with the Mogul/MSVC combo like you said, also a friend of mine put the WM6 Rom on his 6700 and he says MSVC confirmation works fine.
Maybe a Radio incompatability, I'm just a novice though?
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
lip said:
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
Click to expand...
Click to collapse
This is going to sound crazy, but check to see if you have the Cyberon Voice Dial active. If it is NOT, then activate it and try to activate Voice Command with the headset. I could not get my handsfree to activate until I turned the Cyberon back on, which doesn't make sense but it worked and works every time, and I never get that stupid Cyberon thing popping up or doing anything. Also, do you just press the button on your Jawbone, or hold it in for a bit. I know on my one handsfree I could just press it, but on my new one I have to hold it down until I hear a beep (like 3 seconds). Hope this helps.....
Thanks for the reply!
Unfortunately I deleted all the registry keys and files relating to that software due to me thinking it was the culprit...
I'll do a hard reset and try that tonight and report back.
Thanks!
LIP
Actually the culprit of this problem is Windows Mobile 6. This problem has been discussed on past occasions and as of yet there is no solution that I am aware of.
Hi,
I don't understand why others can get it working but I can't.
I have done all the work arounds with the registry files, etc...but I cant even get it to activate through the BT headset.
I have went back to the default software as that works fine although I had to manually do the voice names.
Regards,
LIP
Hello, is it possible to disable the earpiece button, because everytime i use it. it starts dailing people because it was excendently pushed.
Thx !
SOLVED
Figured it out.
i changed these settings
HKLM\Software\OEM\VoiceCommand
Change LaunchAPEnable from 1 to 0
Change Path to ""
Dunno. But I had the same problem. Called my boss 6 a.m. sunday morning ..... *ugly*
Flanders said:
Dunno. But I had the same problem. Called my boss 6 a.m. sunday morning ..... *ugly*
Click to expand...
Click to collapse
haha
Can't i disable it in the registry or something like that ?
Where is the earpiece button ?
i dont know what you are talking about
promexx said:
i dont know what you are talking about
Click to expand...
Click to collapse
The earpieces from htc for listening music has a button on the cord that allows you to pick up phonecales or use speechreconition to dail somebody.
not sure if this will help anyone, but if you set voice dial, then a long press will trigger it instead of calling someone. So unless you do a long press and happen to say 'boss' or someone else, you're safe there. however double click still calls the last person on your list. Working on getting rid of that.
does anybody find the solution jet couldn't find nothing in the registry
i think the only solution may be to rip the button off it. i only started playing with it yesterday and alreadyy accdinetally called my gf several times
There is a kind of anti-solution. Don´t use the headset. Use good/normal Earphones. The micro on HD ist really good, so you dont need to hold it near your mouth. It even works over some distance... maybe for someone a solution.
An other way it could be to use A2DP (Bluetooth-Stereo) headphones.
Figured it out.
i changed these settings
HKLM\Software\OEM\VoiceCommand
Change LaunchAPEnable from 1 to 0
Change Path to ""
You could also replace redial.exe in the windows directory.
Or you could use this app.
http://forum.xda-developers.com/showthread.php?t=476412