Can't connect to local WiFi...errrrr! - 8125, K-JAM, P4300, MDA Vario General

I managed to do this quite easily with my PDA2K, but I'm having a heck of a time getting connected to my WiFi LAN. Has anyone managed to do this yet? Not GPRS, but WiFi.
Thanks!
Tom

Turn up the power level to max performance
I had trouble connecting to my home wifi (well it would appear to connect, but pocket IE wouldn't "locate" any pages). I ran ethereal on my home linux gateway and saw that it was getting its DHCP address properly and performing DNS lookups and even getting the responses. I wish there was ethereal for the Pocket PC, because what eventually made it work was that I turned up the power to maximum performance (instead of in between that and maximum battery). I guess the power level was just a tad too low such that the DNS queries weren't making it back to the 9100/Wizard device. Everything has worked like a charm since including Skype and a voip phone I use to connect by my home PBX called SJPhone.

Turns out I can't connect with either device now. I can get on with my laptop without a problem.
The manual sucks on this topic, but what's the best way to connect to a network?
Tom

Just bringing this back to the top. Still no connection at work, home or Starbucks.
Tom

is the Wizard any better than the BA?
Sorry tnw I can't help - I am wondering whether I should ditch my BA and go for the Wizard... do you think the Wizard is an improvement over the BA, or is it a downgrade?

I really liked my BA when I bought it. I had a the crappy HP from Tmobile which gave me nothing but problems, so getting the BA was great. I still like it. I saw the Universal in person and while it looked cool, I was getting tired of having a big pda/phone so I really didn't want to buy it. Its bigger and heavier than my BA, so that pretty much turned me off.
I read about the K-Jam on The Register and 48 hours after that had one in my hand. I really, really like it. I was looking for a smaller device than the PDA2K and having seen the i-Jam before, I thought this should work perfectly....and it does. I'm really glad I didn't go with the Universal. But, to each his own. The keyboard on the K-Jam is great also, screen is good, speaker is loud, speakerphone is perfect, camera is good....I really have no downsides to it....except I can't get on my frigg'in wifi.
If you don't mind the size, go for the universal. If you're tired of the size and weight of the BA, go with the Wizard. Overall, I feel the Wizard is a huge improvement over the BA. Phone and BT work perfectly! If you buy it from Expansys, you have 14 days to play with it. 14-day return policy.
Tom

Re: Turn up the power level to max performance
funnymanva said:
I had trouble connecting to my home wifi (well it would appear to connect, but pocket IE wouldn't "locate" any pages). I ran ethereal on my home linux gateway and saw that it was getting its DHCP address properly and performing DNS lookups and even getting the responses. I wish there was ethereal for the Pocket PC, because what eventually made it work was that I turned up the power to maximum performance (instead of in between that and maximum battery). I guess the power level was just a tad too low such that the DNS queries weren't making it back to the 9100/Wizard device. Everything has worked like a charm since including Skype and a voip phone I use to connect by my home PBX called SJPhone.
Click to expand...
Click to collapse
I am getting the same, will not locate any page, though wifi settings show signal strength. Changing to settings suggested did not work for me, anyone else had this and resolved? Other than that loving the MDA Vario (Kjam)

happy bunny
finally got working. not too sure what I did but a couple of soft resets and undoing setting a specified IP address. now typing this on the couch using wireless network. Kjam now staying Ijam (MDA compact) likely to be on ebay soon.

Re: happy bunny
allanbach said:
finally got working. not too sure what I did but a couple of soft resets and undoing setting a specified IP address. now typing this on the couch using wireless network. Kjam now staying Ijam (MDA compact) likely to be on ebay soon.
Click to expand...
Click to collapse
What did you change? I've been playing with this all day long. I'm writting this on my laptop over the wifi I should be able to connect to using my kjam. I spent a couple hours at Starbucks today as well.
Any hints would be great! I can get on GPRS without a problem, if that makes a difference.
Tom

My T-Mobile (UK) MDA Vario will not connect to my home 802.11g network. If I switch to mixed 802.11b/g mode the Vario connects and everything is well. The Vario can see the "g" network and knows which encryption is in use but it will not connect. I've read that Australian versions will connect to "g" networks, as will K-Jams and 9100s.
T-Mobile (UK) told me that they have chosen to disable "g" access. I am stunned. I've been trying to find a way to re-enable "g" access but so far no luck. I have hard reset and loaded no external ROM files whatsoever but that didn't fix it. I'm now trawling through the registry to try to find something but I don't actually have a clue what to look for or where.
If anyone has a solution to enabling "g" access on the UK MDA Vario please post. It is the only disappointment I have with the machine.

My KJam was able to connect to g network but on 11M, and regularly dropped the connection and connected, and in an hour of use it halted on WiFi (the pda works, but you get hourglass and nothing more if you enter wifi settings, or try to turn wifi off). I restricted the access point to 802.11b.

i can connect to my AP with no problems if it unsecured. if i turn on encryption it does not get an ip. if i enable mac filtering it works, but removes the mac from the AP when i disconnect.
afaik some APs have problems communicating with mobile devices.

Re: Turn up the power level to max performance
funnymanva said:
I had trouble connecting to my home wifi (well it would appear to connect, but pocket IE wouldn't "locate" any pages). I ran ethereal on my home linux gateway and saw that it was getting its DHCP address properly and performing DNS lookups and even getting the responses. I wish there was ethereal for the Pocket PC, because what eventually made it work was that I turned up the power to maximum performance (instead of in between that and maximum battery). I guess the power level was just a tad too low such that the DNS queries weren't making it back to the 9100/Wizard device. Everything has worked like a charm since including Skype and a voip phone I use to connect by my home PBX called SJPhone.
Click to expand...
Click to collapse
thanks!!!!!! i have been busting my nut with this!!!!

I am having the same problem like this. .. but how did u guys fix it?

Related

Pls help save my sanity

I recently bought the JJ and love it EXCEPT for one issue. I am totally unable to surf the net with any method other than GPRS. I have a Netgear router connected to my desktop and my broadband connection, and run a wireless network with my tablet PC. Before I upgraded, my IIi had no trouble syncing (I know AS 4 doesn't support this) or using IE to surf the net wirelessly. I never had to change any settings on my wifi network.
With the JJ, it connects, gives me a decent looking IP address, but immediately following connection, it kills the Wifi network. Neither the desktop or tablet PC can connect to the internet via the cable modem attached to the router anymore, and what's worse, AS crashes and will no longer synchronise the JJ (which is hooked up to the Tablet via USB). Spb Weather subsequently no longer syncs, either. The only solution I found is that I can reboot the router (the technical term for pulling the plug out of the socket and then putting it back in) AFTER I disconnect the JJ. I can go online again then with everything excep the JJ of course. Unfortunately, I have found no way to reconnect my JJ to AS without doing a hard reset (which I've already had to do twice!).
I know that I can get on the internet using my AS connection because I can update Spb weather, check email, etc. via the USB connection, but yet I cannot get IE to connect. What am I doing wrong?
Please help me complete the one thing that would make the JJ the best PDA I have ever had.
routers and activesync
Microsoft are working on this and other activesync issues. a new AS version will be available in November, so they promise...
Be aware though that in my experience, the worst configuration problems come from routers, and defining network segments... are u using windows xp, maybe network bridging the connection to JJ with the tablet pc could help, u might need to fiddle a bit with the created bridge, like disable enable bridge/connections, etc... this is how i could have tried to do it anyways...
good luck dude, it took me once five days to sort out a wireless connection via routing, and another time I just returned the kit I just bought from netgear to replace it with a one from belkin, but i still had to sweat to get things smooth..., this is the price to pay when hardware is produced by so many different companies, with different drivers, etc... we wish things were more standardised; and to the credit of MS, it forced computer manufacturers to standardise a lot of what they produce, but not enough to my satisfaction...
Peace out
nabil2000
to he honest, I think I just got lucky networking my desktop and tablet and IIi together. I wish the same luck came to me again as this is very frustrating!
DC
Hmm, tricky. You shouldn't have so much trouble. Try a few things that pop to mind:
- Check if your PC has a proxy set. I THINK I once found that when I synced my PPC got passed the proxy settings, and it confused me for ages. WOuld explain why IE behaves differently to spb. I think the proxy is under advanced settings on network connections of PPC
- Check you PPC networks adaptor settings, all should be set to "obtain server-assigned IP"
- Try trning off wifi when using AS. They may conflict
- Search this board for "firewall". Other users have found this to be an issue with AS
Not too helpful, I know...
I haven't experianced any problems. I synced with my BT Voyager w\l router first time and always makes the connection when I'm in the area.
It even makes PIE half usable!
I wish mine would work too
My wifi network is now unstable
still can't connect to internet for IE

wi fi connection problem

Hi,
My mini s seems to have a problem connecting to my home network. When i switch the wi fi on it searches but does not connect. I hard reset a coyuplke of day ago and switch on the wifi and it found my network then promted to enter key, which i did. The phone then connected no problem. No when i switch wifi on it doesnt connect. I go into network cards tab and look what networks are available and my network is there with available next to it but the options have all change (key be given out auto etc...) so i change them to the correct ones etc.. but still it doesnt connect? What i'm i doing wrong? I has worked in the past but not now. I have not installed and 3rd party software and my router is working fine (laptop downstairs works no problem off network).
any ideas
cheers
hi,
i just reseted my router and renamed my homenetwork and assigned a newwep key. started wifi on mini s and it connected straight away to the my newly named network. switch wifi off then on again and now it wont connect. it see's the network and says its available but wont connect. under the settings the network key has changed. it's defo a problem with the phone cus everything else works fine (laptop, psp). it's just not saving the network info???
and ideas???
cheers
think it could be because i've upgraded to o2 new rom??? Could somebody with the latest UK o2 rom please confirm that ther can connect to the networ?
cheers
This also happens to me with the latest O2 ROM.
What you have to do is to manually connect and perservere by going to Network Cards, tapping the network and then select Connect. It may take a few go's but it will connect eventually.
Report back how you get on.
You may want to set up your router to assign a fixed IP address to the Mini S's MAC address as well.
Sounds like the problem I've been having. I've also got an O2 rom and am having problems connecting to any wifi network, even though it worked fine the first time.
I've tried going to the network cards page and clicking connect, but it hasn't worked so far. talkingbollox - when you say 'eventually', how long are you talking?
I'll also try assigning a fixed ip address later, but my hopes aren't high.
when you say 'eventually', how long are you talking?
Click to expand...
Click to collapse
Sometimes 2 attempts, sometimes up to 20.
Persevere!
20! I probably tried about 10 times before I gave up. Surely this is a fault. You shouldn't have to waste so much time just to get a connection! :x
I tried MAC address filtering too but that didn't seem to work.
Do you think this is a O2 ROM problem or a hardware problem? If it's just O2, I think I might try a different ROM. Any suggestions which ROM to use?
My Mini S came already with the latest rom I think, and it works fine with my router (BT Voyager 2110)
Are you guys using the 802.11g reg edit?? Maybe thats why its not working, I actually did the hack before I ever turned on my wifi so I don't know if it worked without it. Try it My wizard connects with my router in G only 8)
Search the forum you will find loads of posts about it, and I think somebody has even made a cab file that does it for you, along with some speed tweeks that make your system faster.
It must have taken me in excess of 40 goes to connect last night.
Yes, I am using the g mode hack. My Voyager 2100 is set to broadcast in both b and g (i.e. mixed) mode.
I had the same problem... what I did was just entering the dns adress of my router.
So the ppc doesn't wait for the dhcp server to asign it .. it works great when surfing at home !!!

Wifi problem

I hope someone can help me. My new xda exec will not detect wifi anywhere. I can get it to work when sync lead to my laptop but I just found out it is routing to my laptops network connection. I have gone through all the settings and cannot find anything wrong it just keeps on saying scanning network
Hi Simba1623,
I'm new to XDA's but have been playing with WiFi networks for a while.
So i'll have a couple of guess's :wink:
Is the router broadcasting its SSID ?
Do you have spare IP's available ?
Have you added the MAC address if you've got MAC flittering switched on ?
All are common causes for devices not finding the network.
Thanks for responding. The id issue is sorted as when I first setup the xda it did work and asked me for password and worked fine. Then the following day stopped. There is plenty of address left and it won't work anywhere. Regarding mac address I have no idea but will cheack with a friend. When I bought the XDA I was assured it would pretty much work out of the box...... and it did for one day Thanks again :?
Try to delete the connection settings associated with your router (in the wireless manager), hopefully that should allow you to "discover" the router again and fingers crossed it should stay working
Thanks I just I tried that. It didn't work straight away but following full shutdown and battary removal it seems to be working now. Fingers crossed it stays
Wifi signal almos DEAD, very strange
Hi, My O2 Exec has problems with the WIFI connection, no matter where I go, if O2 Exec isn't really near the access point, will not detec or connect to the wireless network.
when I say near, is around 1 meter from the access point antenna, if I go more tham 3 meters, goes almot 100% oofline and 4 meters even detect. It happens at home and at work, in both locations my laptop works fine 40m from the access point and my nokia 9500 (cel I used to have) goes 30m, I've made this tests of distance today.
So... seems to be on My O2Exec the problem... ... I think started when I upgraded the ROM to latest build available at my-xda.
Please, any clue? I already changed performance/battery from the control panel/wireless and even reset many times, updated the rom again.. no clue at all...
HELP!!!!
mac address
hi,
i am new to networking esp. wifi. i am not sure how and from where can i get mac address for my device, its a siemens sx66 (w/o cam) have upgraded to ivan's latest rom. please help
o2 atom wifi issues
Hi there,
I also have had the same problems with my o2 Exec, when I first turned it on, it wouldn't detect any access points, after driving myself nuts with trying to work out what was wrong, I eventually put it down to the phone. so I rang O2 and they told me to send it back. Strangely just after that phone call it detected the network and has been working fine. Until last night when it decided that it couldn't connect again. It still sees the network, but will not connect, even though it says that it is available.
Also a couple of days ago the speakers in the phone stopped working after I used the radio with the headset. After putting the headset back in and pulling it out about 20 times. it did work again. but not before I went CRAZY AND HARD RESET THE DAM THING.
I hate this phone, I have owned the o2 mini and the jasjam, this is the worst of them........
I am selling mine as soon as I get O2 to replace this piece of crap.

The battle for wifi

Hi guys. If you don't remember me - here's my story in a nutshell. I got a 8525 about a week ago. Since day one I tried and tried and tried but never managed to get the wifi working... (as you can imagine I am beyond desperate at this point)
Anyway last night I got thinking and decided to give it another stab. I hard reset, messed with the settings again...and this time manage to get a little further. My phone is now showing me as "connect to network", only problem is I get a message saying "Cannot connect with current connection settings. To change connection settings, tap Settings." each time I try to access anything internet related. I know I'm close especially since I'm actually connected now, I think it's just AT&T's rom doing everything it can to get me to use their networks (I'm on T-Mobile and don't have a dataplan anyway...).
Anyway can you guys think of what the problem might be? I'm so close I can taste it! Thanks.....
Bump... Anyone home?
where did you get your 8525? my wifi on my 8525 works perfectly fine, have u tried upgrading to WM6?
I have WM6 already. I got it off ebay. Everything is perfectly fine with it, it just doesn't want to use the wifi connection to get online.
Try a hard rest.
my 1st 8525 i got off ebay, and it worked great up until a few weeks ago, when the screen stopped functioning it just turned white, i called AT&T and they sent me a new 1 i just got it this morning and now, i cant make calls >.> it will ring then my phone will say i have no service when i have full service and the call will end. but my wifi is fine... did u use the WM6 upgrade that was released by AT&T
No thanks re: the hard reset. I've already done that... If I can't figure this out I'm going to sell my phone and steer clear of ppc phones. I like it, but I bought it for wifi and this is just getting ridiculous. I have tried everything. I've spent hours and hours on this. I've reset my router god knows how many times, played with security settings, reset my phone over and over to start over.....
The worst part now is that I know it's connected. The wifi aspect is fine. It's just the stupid phone not wanting to use the wifi connection for the internet.
Maybe someone with a 8525 and a Linksys router can post ALL of their wireless related settings for me.
Ekh
Yes I used the AT&T update.....
i use wifi and my linksys router, the 8525's range isnt that great u need to be within a few feet of the router to get good reception, im about 30 feet from mine and i get 2 Wifi signal bars and an ok speed. but try this
Start > Programs > Proxy Manager > Disable Proxy
then try to use your wifi, then go back and restore the proxy when your done, i think some 1 told me to do that because att uses that so u can use their internet service or sumthin
Thanks but I'm way ahead of you. I've already tried every piece of advice I've come across on xda. My last hope is someone elses detailed settings.
is your network passworded by a WEP or TKIP ?
It's WPA... My device has the password, and I added the MAC to my router table. It's connecting to the router/wifi...
...it's just that my device won't use the connection
* Sigh * Looks like another one of my please help me posts has gone dead...again...
olly666 said:
...it's just that my device won't use the connection
Click to expand...
Click to collapse
Your problem may be one of the following:
1. The wifi connection is specified as connecting to "work" and programs are set to use an internet connection.
2. The wifi connection is specified as connecting to "internet" and programs are set to use a work connection.
Nope that's not it. But it does remind me of something so thanks. I deleted all the connections seeing as I don't have a dataplan... I made a new connection called "Wifi". BUT, it's not like I can specify any connection for it so it's just blank (no connection specified). By this I mean the options for a connection are:
bluetooth, cellular line, cellular line (GPRS, 3G), Generic IrDA, Hanes...COM1. No option for wireless...
Does that help?
Check that your router is set to allow connections by devices with 802.11b, which the Hermes uses. Most default to 802.11g only.
It's set for b and g
Helloooo...?
Hallelujah!!!!!
People, I have WIFI!!!
Thanks to everyone who tried to give a helping hand... It's really appreciated.
For future reference to those who are suffering from the same problem - this is what seemed to fix it... I entered google into IE via it's IP address rather than it's name (open command prompt, ping google.com...). To my surprise the page quickly loaded. I then instantly realized that the problem was with the DNS settings. I opened up "Wi-Fi" in settings, went to the "Network Adapters" tab at the bottom and entered in the DNS addresses for "IEEE 802.11b/g...". If you need help with this just PM me (I consider myself somewhat of an expert on this topic now).
I thought I was never going to get online. There IS a god!

WiFi useless in my opinion on the Xperia

1. It disconnects automatically too frequently
2. I have a secure network and I have to enter the 100 digit (seems like) password everytime
3. Sometimes wont' connect at all.
The signal strength is 100% too.
Anybody else have this issue???
Is there a program that can monitor and connect automatically (remembering password) to help me???
Many thanks.
Mine is OK. Only have to enter the password once for the first time. Mine only disconnect when I turn the WiFi off via Communication Manager.
Im with craven.... My WiFi works perfectly.
My WiFi works flawlessly.
There is SPB Wireless for monitoring only.It does not help you reconnect. Good program.
Did you try to adjust the slider on WiFi settings towards Best Performance instead of Best Battery (it's on Power Mode in WiFi settings, from Communications Manager) ?
Maybe you have installed some crappy sofware that takes over your wireless settings(it happend to me when i installed some software- i don't remember it's name right now).
nope mine's ok. doesn't turn unless you specify. Reception is not bad either.
no problem with my xperia...
No problem with Linksys WRT54GL at all. Maybe you should check your router's settings.
Only twice had I needed to re-enter my WPA passkey, but otherwise it's great. Able to enjoy the web whilst in bed and a lot faster than my old P990.
It happened to me twice.
Though no problem lately.
As a little trick, you can use a text file (or whatever code protection software) to store the key and do a copy/paste if you don't want to type the code all over again.
I had this problem at first... I didnt know why it would keep disconnecting...then i figured it out..the wifi disconnects when the phone is in standby. Schaps advanced configuration tool fixed it quick and now im enjoying it very much =)
many people have success upgrading the firmware of their routers to fix
such issues
wifi working grt in my x1
once i entered wep key
now its working grt
You shouldn't use WEP, you can crack WEP under a minute now and even if you use a while "mac" list it's not safe enough since you got the MAC addresses just listening the packets.
my x1 works perfect on wifi. not loosing connection, set up the wlan key at the first time and it was saved forever. have tried it on 5 wlans and everywhere without problems... is think wifi and the gps are the only things that are sophisticated 100% on the x1 ^^
billybobjones said:
I had this problem at first... I didnt know why it would keep disconnecting...then i figured it out..the wifi disconnects when the phone is in standby. Schaps advanced configuration tool fixed it quick and now im enjoying it very much =)
Click to expand...
Click to collapse
It is good only if you have a usb connection or 110/220V nearby as always on wifi drains the battery in a half day
BTW: the wifi reconnect after suspend is really fast here, almost every time 1-2 sec.
mine is just fine, my home wifi uses a 11 digit password, just had to put in once and never again, doesn't disconnect randomly, only when disable the wifi obviously.
you should check with your warranty, see if they can do something about it, cause your case isn't normal.
have you all changed it to best performance in the settings?
im sitting right next to my router...and it loses connection now? this is quite annoying. i put the slider in the middle.. i sometimes leave wifi on when im asleep at home. so i like to keep it in the middle? whats the deal?
haha...about the Xperia wifi problem,just off your bluetooth b4 u try to use the wifi.
i think xperia is sharing wifi and bluetooth in the same device support.
i been test many time....when open bluetooth the wifi is weak and keep disconnect..
if this problem can't slove it then i think u better send to service center to fix it.
I actually found a problem in the Wifi/Wireless configuration.
I have 2 WPA protected routers with long keys/passwords. I found that if I enter the keys for both, the X1 would only remember ONE of them. I tried this by trying to save the password on either one of the WPA routers, and would only remember the FIRST one entered. So if you entered a 2nd one, it would always forget it, and you would need to manually re-enter the password again. Sure, it would connect, but then after it disconnects or you leave the area, then re-enter the area, it already forgot the password again.
i dont have bluetooth on and this is getting pretty annoying..
are you guys all using best performance?

Categories

Resources