Hi,
I was wondering if the battery of HTC Magician is the same as the battery of the HTC Prophet?
Reason for asking is that the 2 PPCs have the same measurements and the original battery of both is 1200mAh.
But, for the S100 I found a 2500mAh battery, where there are no other opportunities for the S200.
Does it fit? Do they have the same contacts? Can anyone check it?
Thanks in advance.
Regards,
DJ Chase
According to this thread, yes.
Hi all, anyone here using bluetooth headset please help me. I am using MDA Pro with Motorola HS820 (mono). It works well with bluetooth turned on by comm manager but I recognised that it eat the battery quick. I try to use Pocket Zen Phone with communication setting of BT to: BT turn on when on Call (MS). That setting will turn on the BT when the phone has a call, but the connection with the BT headset is not smooth, sometime it doesnt connect. My question: is there any way to set BT of Universal to 'Auto' mode as SE phone? I missed my last SE P800 phone for that feature, save battery while still connect well to BT headset. Any help will be highly appreciated.
PS: sorry for my English because I am not native
I use dayly my jasjar with a sony ericsson hbh660 and battery is no problem at all. I tryed pocketZen few months ago, but it didn't work for me. After alla if you can turn bluetooth on on incomin calls, you can't do anything if you want to voice dial throu your headset.
Thanks for replying. I see the battery will last longer if I dont turn the BT on. Voice dialing also dont attract me because I just make 2-3 calls per day. Still looking for any software could turn on the BT on call smoothly. Any advice? TIA.
http://forum.xda-developers.com/viewtopic.php?t=60832&highlight=battery
Menneisyys
Posted: Wed Aug 30, 2006 09:52
Subject: Power consumption measurements of the HTC Universal
--------------------------------------------------------------------------------
It was a few days ago that I’ve published some test results of the HTC Wizard (a.k.a. i-mate K-Jam, T-Mobile MDA Vario, Qtek 9100, MDA Vario, XDA mini S, SPV M3000, VPA Compact II, Dopod 838), Bluetooth and infrared power consumption-wise. Now, the HTC Universal follows suit.
Bluetooth
First and foremost, the case of the Universal seems to be very similar to that of the Wizard: that is, it’s almost impossible to measure the additional power consumption of the Bluetooth module. The difference between the switched on and the switched off case was 1% (at most!) a day (if at all).
This, incidentally, corresponds to my measurements of the BT unit with the PDA switched on. According to my measurements, the BT unit burns between 1 and 2 mA’s in those cases. This, as the device has a 1620 mAh battery, corresponds to between 800 and 1600 hours battery life alone - that is, not taking into account the need to power the dynamic RAM, which is pretty much the same as with the HTC Wizard, which is around 1.25 mWh corresponding to about 2% battery level drop/day (don’t forget that the Wizard has a smaller, 1250 mAh battery; this is why it had a bigger, 2.5% battery charge level drop figure).
Hi Experts!
I have a MDA Vario II (HTC Hermes) with Schaps 3.57 Rom, and it works great
Is it possible to MDA from the standby with another key as the ON / OFF awaken?
It would be fine if there is a button would be easily accessible.
To know who is a tool or solution?
Many Thanks!
Did not really a solution to the MDA from the standby otherwise than by the ON / OFF button to awaken
Please help me
Hi there, 2 questions:
1) The built-in GPS receiver turns OFF when switching the device standby - that's really bad for me because I like to log my GPS track when I go hiking. Is there any setting (registry? hack?) to tell GPS NOT to turn off?
2) I thought of a "workaround" to use my old Holux GPS bluetooth mouse. Pairing works, but after switching the device in standy mode, it TURNS ITSELF ON AGAIN!!! (after 3 seconds) - so battery is again burned. Is there any setting to tell the device NOT to turn itself on? It seems to be the case with any kind of incoming bluetooth connection, the screen goes on. That's really bad for me...
So anyone can help? Is it a generic WM 6.0 annoyance or an Ipaq 614 "special"?
Greetz B.
go to battery settings and let the device work with no time limt
then use this app
http://www.mobiletopsoft.com/board/1313/turn-your-pocket-pc-screen-off-with-awady-screenoff.html
(there are more freeware for this issue )
Hello all,
where can I get the connection wizard ? It's no longer included in Michy's light ROM for X7510.
Dieter