Related
Is any useful way to remap the Green and Red Phone button and the volume slider button? I mean for launch application or any function. Thanx.
There are some such programs for volume slider.
The most simple I prefer is attached here.
Just put it to the \Windows\Startup folder. It just "unbind" slider but not remaps it to another buttons. This will allow to use slider as F6/F7 buttons in programs able to hook them e.g. Haali Reader...
Thanx
It seems to be ok but where did you attach it? On my MDA is no offered file to download at this time. ThankU.
I've got it
Ok. Now is the sheet with uploaded file appeared. I've got it and extracted it. After i run the *.exe file it does nothing. Why?
because it should do nothing
This utility just frees slider buttons from default binding to volume control.
If you have an application that understands F6/F7 hardware key pressings (slider up/slider down) you may bind these key in the program.
As for me - I use them to scroll text up and down in Haali Reader text reader program.
But (as I said above) there are another programs to use slider up/down control. Unfortunately I don't remeber where I saw these utilities - but they really exists
And, as far as I'm back to the Andes from (Blue Angel) - I think I will write another one specially for Himalaya/Andes.
Ok, let's wait some days. If there are any results - I'll post the report here
P.S.: BlueAngel is the best HW keys equipped device i've ever saw But...
Thanx once again
Thank you 4 ur help. Now i understand that. And what about the Phone buttons? Any ideas? Ex.I want to use red button as Ok/Close simulation. Any ideas how to do that? Thanks.
Nobody unmaps phone buttons. It is possible but unresonable because of HTC is a phone device also. But I'll implement this feature too.
OK
I will wait for it.
The very first (and buggy) try of HW remapping utility is done. The application setup is available HERE
After installing .CAB file go to Start -> Settings -> Buttons and see the changes...
DO NOT INSTALL THIS APPLICATION ON BLUE ANGEL!!!
It will hide four lower hardware buttons until hard reset!
1. This app was tested on Andes with WM2003se, but should work on Himalaya/Magican with WM2003 and above
2. You will lose the possibility to use hardware key mapping in other applications forl remapped buttons. I need to re-grab buttons from time to time because the system tries to thieve them from me
3. Currently I don't now how to emulate green and reed buttons functionality after unbinding them from the system.
4. I can count any number of button pressings (3,4,5...), but -
5. WinCE reserve codes for only 15 hardware buttons (40C1..40CF)
There are some ideas for future improvement. But it would be nice to know your thoughts.
Just to "stimulate": I can create settings screen during setup to allow flexible configuration where you will
- choose which buttons to handle and how many key pressings to detect;
- choose option to unbind and/or re-map volume and phone buttons
- ???
And let me take a time-brake for 2 days before next programming session
The utility is ready. It allows you to:
remap each standard hardware button to 2 or 3 "virtual", simulated via double or triple clicks;
use volume slider to simulate Up/Down direction keys or create additional "virtual" hardware buttons;
remap Red and Green phone buttons to 1,2 or 3 hardware buttons each.
In a result you may create up to 15 hardware buttons (system limit)
Just install program and check Start -> Settings -> Buttons.
Here is Oficial AEBPlus home page, full desktop-based setup (~27K) and Direct link to CAB file (~30K)
Well done!
Excellent software! Thank you once again for your work. Works very very well!
man this is great really like it
works perfect :lol:
Seems to work great. Haven't had it running long enough to see if the camera button will get stolen back (big problem for me on XDA IIi), but being able to map the volume is great.
In the next version any chance of adding an <enter> option like Vito Button Mapper which I think just sends a <carriage return> to select whatever is highlighted.
Is "<Ok/Close>" option in button settings applet not the same?
NO, <OK/Close> generally tends to close the current window rather than selecting whatever is highlighted.
Also whatever application keeps on stealing back the camera button is still doing it. I don't know if it is part of the UK O2 customisations or the core PocketPC Rom, but eventually whatever function is mapped to the Camera button gets re-mapped back to the camera. This also happened to me with the standard button mapper and Vito button manager. It's a little annoying since the camera button is the most usefully positioned, and it is also easily knocked, starting the camera at awkward times.
Ok, I'll add this option for camera button (a bit later, in a case other suggestions arrives).
As for the re-hooking button by camera application: AEBPlus initializes all of the buttons from time to time. Currently this take place every 30 seconds. So if you will wait a bit - all buttons should be re-grabbed again
This does not seem to help because whatever application that is resetting the camera does it in the same place as you are storing the button mappings. When I go into the Buttons Setup it will now say that the Camera button is mapped to the Camera.
Yes,I see... It looks like Camera application is a pushy application . The solution is to remap "normal" Camera HW button to 3 press instead of one, but I don't like this.
Anyway - utility was released.
New features: added option to emulate Enter key with Camera button.
Hi AE, your utility is great. It is very useful but SIMPLE and SMALL.
I used it instead of other button mapper software.
There're some issues need tobe improved:
1) Mapping "Green" and "Red" button:
Enable mapping when they're iddle only (phone function does not work).
E.g: I'd like using Red button to close running app. But in phone function, Red button is still used to hang-up the phone as original its function. Anytime I have a phone call, I can use Red button to cancel a outgoing/incoming call.
You can refer the program of mamaich in this web site.
2) Single press is too low:
I press a key one time and wait 5 secs or more until it works. It's too slow. Can you improve? Double-press is OK.
3) Press n hold:
Can you add "single press n hold" for all hardware-keys? I think "single press n hold (after 3-3.5 secs)" is more convenient than "double press" or "tribble press". Do you think so?
Hi AE, very usefull application! Is there any way that we can have an options screen, where we can change the key options we get after installing the app? That would be easier to edit our preferences if we want to make changes to our initial choices. Furthermore I added a Mortbutton to one of your simulated hard keys. Each Mortbutton can show a list of 12 apps for a buttonpress. That means That I can now bind more than 60 apps to the buttons in total! Very good for one-handed use of my Magician, thanks!
What i'd like to do is assign more than 1 binding to the outlook button.
Exactly the same as the "voice dial" one has as standard (press for voice dial, hold for voice memo)
What i want is (on the mail/outlook/text button) press to open outlook, hold to start new text message.
Is there a reg key to change to allow this dual use?
If not (and i'd rather not add more software to map buttons) what software will allow this? Multipress isn't really an option, as pressing the button again now will cycle through the different text settings (sms, mms, e-mail etc) and put you in whatever folder you were in last (inbox, outbox etc)
EDIT:
While i would still like to be able to do this, thanx to vijay555 who's phone tools 2 lets me start a blank sms from a today screen .lnk file
The only way to do it is using Vito Button mapper.
Button mapper supports macros as well.
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
carphead said:
The only way to do it is using Vito Button mapper.
Click to expand...
Click to collapse
I had to hard reset my Qtek9100 after Vito Button mapper installation, so I couldn't recommend it...
uppps another one ?¿?
Regards
vijay555 said:
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
Click to expand...
Click to collapse
I'll search some more later and keep an eye on your site!
Vito Button Mapper works here, but after a soft reset I get a popup message saying a certificate is missing.
Also, after installation my backlight was turned off. Went to settings and restored it and all works fine now (also after a reset... only problem is the popup)
Vito Button Mapper screwed up my softkeys.
Only in the 'Today Screen' however thats were a couple of my most used buttons were.
Now they don't work and sometimes change?
I would urge you NOT TO USE if you want to use soft keys in Today screen.
Robin
Soft keys can be configurated in the app, that is why you lost them for now...
Reconfig them:
Start -> Settings -> Buttons
Configuration drop down -> Today
Top 2 entries: Left softkey & Right softkey
Well yours must be different to mine.
When I open buttons the only choices I have are for the 5 hardware buttons.
No other choices are available????????
Robin
For those who are not familiar with this nifty yet inexpensive bit of software, AE Button allows multiple actions (up to 4) to be programmed to the buttons of your Pocket PC...and is perfectly compatible with the Athena.
I really feel the need for this after having had so many buttons on my long gone HTC Hermes.
I've configured some basic functions on mine so far with pleasing results and no incompatibilities so far.
Joystick configuration:
1 click = 'Enter' (no change there)
2 clicks = 'Open File Explorer' (that has simplified things for me somewhat and is very intuitive to use this way as 2 clicks opens a folder and 1 click confirms my selection)
Comm Manager configuration:
1 click = 'Switch on wi-fi' another click switches it off
Long Press = 'Switch on Blutooth' another Long press switches it off
Camera Button Configuration:
1 Click = 'Camera application' (no change here)
Long Press = 'Opens Resco Photo Viewer' (similar category of applications on one button - again intuitive)
OK Button Config: (On device - not keyboard)
1 click = 'Really closes apps' (linked to Wisbar's OK/Close function)
That's all I've done so far, but then I have at least 2-3 more configurations per button if I need it, which has also freed up space on the 'Start Menu' - only 7 choices allowed by default.
It's worth a look if you don't allways want to go through the various option menu's to get to that one or several important apps or folders or to simply initiate something.
Just considering a quick soft-reset by double clicking the Windows key...1 click brings up the cascading menu (wisbar)...would be nice to soft-reset on a double click (but this particular Windows key is usually tricky if at all possible to reconfigure like the other ones).
Anyway just wanted to share this in case anyone else found it useful.
THANK YOU!
mackaby007 said:
For those who are not familiar with this nifty yet inexpensive bit of software, AE Button allows multiple actions (up to 4) to be programmed to the buttons of your Pocket PC...and is perfectly compatible with the Athena.
I really feel the need for this after having had so many buttons on my long gone HTC Hermes.
I've configured some basic functions on mine so far with pleasing results and no incompatibilities so far.
Joystick configuration:
1 click = 'Enter' (no change there)
2 clicks = 'Open File Explorer' (that has simplified things for me somewhat and is very intuitive to use this way as 2 clicks opens a folder and 1 click confirms my selection)
Comm Manager configuration:
1 click = 'Switch on wi-fi' another click switches it off
Long Press = 'Switch on Blutooth' another Long press switches it off
Camera Button Configuration:
1 Click = 'Camera application' (no change here)
Long Press = 'Opens Resco Photo Viewer' (similar category of applications on one button - again intuitive)
OK Button Config: (On device - not keyboard)
1 click = 'Really closes apps' (linked to Wisbar's OK/Close function)
That's all I've done so far, but then I have at least 2-3 more configurations per button if I need it, which has also freed up space on the 'Start Menu' - only 7 choices allowed by default.
It's worth a look if you don't allways want to go through the various option menu's to get to that one or several important apps or folders or to simply initiate something.
Just considering a quick soft-reset by double clicking the Windows key...1 click brings up the cascading menu (wisbar)...would be nice to soft-reset on a double click (but this particular Windows key is usually tricky if at all possible to reconfigure like the other ones).
Anyway just wanted to share this in case anyone else found it useful.
Click to expand...
Click to collapse
I'm so grateful that you posted this. I was about to purchase Vito Button Manager but the program isn't exactly what I wanted. You can't see the joystick, ok button on device, etc. And I wanted more options, like the four you mentioned here. Great job on providing us with this info....and in my case just in time. Thanks again bro!
So can you program every button on the device? Even the Windows icon button and the browser button?
Thanks from me too. The one thing I knew I would miss from my current PDA (which has 6 programmable buttons each in press and press and hold mode).
Looks like a great alternative.
Great heads up thanks. I'll be adding this as soon as I've customised my Vista-esque, TrueVGA, WA/WAD setup to my liking (spending waaay too long on it!).
Glad I could help guys.
BTW, the 'Windows key' under the 'OK' button (on the device itself) won't let me configure it, so I have now added a 'Long Press' to the Joystick to soft-reset. It works very well and quicker than 'psshutXP' or any other SIP alternative.
Also changed the 'Comunication Manager Button' to:
1 click = Wi-fi on/off
2 clicks = Bluetooth on/off
Long Press = Opens Comm Manager (retaining original functionality)
Note: Had to enable the long press mode of 'Voice Recorder' to = Open Comms Mangr aswell, otherwise it caused a conflict.
How did you get the joystick and the OK button to program? I tried ADD BUTTON but no luck. What hex shows up for the added buttons?
When I did the install I got the 3 buttons plus press and hold, green phone, red phone, left softkey, right softkey, up, down, left, right, enter/action, vol up, vol dn.
Hope this helps.
hammermedia said:
How did you get the joystick and the OK button to program? I tried ADD BUTTON but no luck. What hex shows up for the added buttons?
When I did the install I got the 3 buttons plus press and hold, green phone, red phone, left softkey, right softkey, up, down, left, right, enter/action, vol up, vol dn.
Click to expand...
Click to collapse
Lucky for you I'm still up. Ha ha.
Anyway...the Joystick button is already recognized as 'Enter/Action'. Simply select that option and click in the big blank box directly below.
1st Option = 3.'Handle by AEBPlus'
2nd Option = 1. 'Single press' &
3rd Option= 'Press Enter' (this retains the default function)
Then 2nd option = 2. 'Double press' (in the drop down option box below chose) 2. 'Run application' & below that chose 'File Explorer'
Then return to 2nd option drop down box again:
= 4. 'Long press' & in the box below chose;
= 37. 'Soft-Reset your Device'.
That's it!
The OK button should show up as 'Win Key', Button #4075...I have only assigned this to open 'cascading start menu', as this is a system key/button as is the 'Windows' key directly beneath it and they are either complex or presently incapable of being re-mapped.
Hope the above explanation was not too confusing, but it's late and I'm probably functioning on 0.001% of the less than 5% of brain power I'm capable of using at best. lol.
Good luck
Thanks Mackaby007!
I was able to get the OK key mapped as:
1. Show today
2. Ostia (my GPS)
I figure I'll add ilauncher and always be only two taps from the app I need.
hammermedia said:
Thanks Mackaby007!
I was able to get the OK key mapped as:
1. Show today
2. Ostia (my GPS)
I figure I'll add ilauncher and always be only two taps from the app I need.
Click to expand...
Click to collapse
No probs hammermedia. Glad you got it configured.
I also would like to suggest PQZII to customize keyboard and to have ok button to really close applications.
http://www.nicque.com/PQz/PQzII.htm
mackaby007 said:
Glad I could help guys.
BTW, the 'Windows key' under the 'OK' button (on the device itself) won't let me configure it, so I have now added a 'Long Press' to the Joystick to soft-reset. It works very well and quicker than 'psshutXP' or any other SIP alternative.
Also changed the 'Comunication Manager Button' to:
1 click = Wi-fi on/off
2 clicks = Bluetooth on/off
Long Press = Opens Comm Manager (retaining original functionality)
Note: Had to enable the long press mode of 'Voice Recorder' to = Open Comms Mangr aswell, otherwise it caused a conflict.
Click to expand...
Click to collapse
I can't configure Long Press = Opens Comm Manager which a linked to windows/cnnmgr.exe, but it steel keep on opening Voice Recorder, so how to configure it?
asci said:
I can't configure Long Press = Opens Comm Manager which a linked to windows/cnnmgr.exe, but it steel keep on opening Voice Recorder, so how to configure it?
Click to expand...
Click to collapse
There's another button in the menu which selects 'Voice Recording' on a long press through the comms button. This is causing your conflict.
You need to assign control of that function to AEB as well and then assign Comms manager via long press.
So effectively you have to configure that 'long press' function twice! Once in the Comms Button and once for the pre-programmed 'Voice ' recorder, as it uses the same button.
Hope that was clear. Let me know how you got on.
well, I have assigned 'long press' function twice like you said but no effect...
Hi Mackaby007, thanks for sharing.
I am using the Dopod U1000 CHT, loaded the English cab, and always got problem going into the Buttons setting (just hang), need to soft reset and go in again. When I am able to go into the buttons setting, I can only config (under normal windows setting) these buttons
Button1, Camera
Button2, Opera Browser
Button3, Comm Mgr
Button3 (press & hold), Voice Recorder
I tried using BurrOak Hotbutton Plus V3.0, new version, with nicer graphics. Assign HotButton Plus to a button3 (biggest easiest to press) - repeatedly pressing the button will cycle through your jog tasks (I have enable Phone & SPB full screen keyboard).
http://www.burroak.on.ca/hbplus.html
Anyone can provide me the full register for the hardware button, so I can also control other button (press & hold)
HKEY_LOCAL_MACHINES\SOFTWARE\Microsoft\Shell\Keys, currently I have only 40C1 (button1, camera), 40C2 (button2, Opera Browser), 40C3 (button3, Comm Mgr) and 40C4 (button3 press & hold, voice recorder)
The AE button plus ver 2.41 onwards cause problem with CallSMS Blocker. If AEB is installed on the device then the CallSMS Blocker causes the phone to hang. The PPC's other functions continue to work properly...Any body faced such problem??
johnnykok said:
Hi Mackaby007, thanks for sharing.
I am using the Dopod U1000 CHT, loaded the English cab, and always got problem going into the Buttons setting (just hang), need to soft reset and go in again. When I am able to go into the buttons setting, I can only config (under normal windows setting) these buttons
Button1, Camera
Button2, Opera Browser
Button3, Comm Mgr
Button3 (press & hold), Voice Recorder
I tried using BurrOak Hotbutton Plus V3.0, new version, with nicer graphics. Assign HotButton Plus to a button3 (biggest easiest to press) - repeatedly pressing the button will cycle through your jog tasks (I have enable Phone & SPB full screen keyboard).
http://www.burroak.on.ca/hbplus.html
Anyone can provide me the full register for the hardware button, so I can also control other button (press & hold)
HKEY_LOCAL_MACHINES\SOFTWARE\Microsoft\Shell\Keys, currently I have only 40C1 (button1, camera), 40C2 (button2, Opera Browser), 40C3 (button3, Comm Mgr) and 40C4 (button3 press & hold, voice recorder)
Click to expand...
Click to collapse
Hi johnnykok. Sorry can't help you with that app. It's the first time I've seen it. Looks nice though.
Having said that, I would imagine that the memory footprint of this app might be bigger than that of AEB, plus I have no issues with AEB, so probably won't even look at anything else.
I usually stick to what works for me unless I come across a problem. Sorry.
c_shekhar said:
The AE button plus ver 2.41 onwards cause problem with CallSMS Blocker. If AEB is installed on the device then the CallSMS Blocker causes the phone to hang. The PPC's other functions continue to work properly...Any body faced such problem??
Click to expand...
Click to collapse
Try version 2.51 That's what I'm using. C if you still get that conflict....if so, write to the developers as they are pretty good and will try to incorporate a fix by the next release, but try their latest version first.
asci said:
well, I have assigned 'long press' function twice like you said but no effect...
Click to expand...
Click to collapse
Asci...you have to assign the long press function to 2 different buttons.
1st button is the comms button (above the power button)
2nd button is the same button physically, but it's the long press function that Windows has assigned to it, which is 'voice recorder'. That virtual button is in the main menu and has an icon that looks like a cassette. You have to configure that button to allow AEB to handle it first, then assign the long press function of it to open comms manager.
If you don't do it this way, there is a conflict because windows has assigned that function on a long press and you have already assigned a function to that using the comms button....it's all a bit confusing.
See the images below. Hope this helps.
@ mackaby007
It's exactly what I did but with no effect...
asci said:
I also would like to suggest PQZII to customize keyboard and to have ok button to really close applications.
http://www.nicque.com/PQz/PQzII.htm
Click to expand...
Click to collapse
Would you have any screenshots of what this utility does? I couldn't find any on the website provided.
Also, doesn't the Athena/x7500/Advantage come with a Task Manager that allows for this functionality already? Start, Settings, System...then click on Task Manager.
I installed this softkey app on both my Polaris and Nike and it works just fine. Unzip it in the windows folder, then it will appear under your settings menu, system tab. You'll have to do a soft reset once the keys are changed.
I think I snagged this from my Universal flashing days but it's stable on our units.
Sorry for m dumbness mate but what is a softkey? What does it do?
Those are the two keys at the bottom (standard: Calendar (left) and Contacts (right).
The WM keys, but software keys. So softkeys
With this program you are able to start another application with those keys instead of the standard calendar and contacts button.
I've heard of an app, that maps different actions to the keys, depending on how long you press the button.
For example short press of the right key brings you to the contacts, long press starts a new sms.
Does anybody know the name of the program?
jekatt said:
I've heard of an app, that maps different actions to the keys, depending on how long you press the button.
For example short press of the right key brings you to the contacts, long press starts a new sms.
Does anybody know the name of the program?
Click to expand...
Click to collapse
HBUTTON THE BEST........http://hbutton.pavlicek.org/
AE button plus is great as well, allows for very specific customization.
The lack of hardware keys (without the keyboard attatched) on the x7501 was my biggest reservation while deciding to buy it. Now I'm having trouble with AEBPlus and HButton (would be perfect if I could use AEBPlus & assgn Hbuttons to the Long Press mode, but it doesn't work). I can't seem to get the flexibilty in button assignments like I had wiith my wizard, I think because a lot of the long keypresses are OS assigned and not UI available.
I don't want to start reg hacking in my random ways if someone has more experience, or better software ideas, and would be willing to share it.
(I keep my unit in the case without the buttons locked when it's in standby, so if I hit a hdwe key, I only have to do that once to get a specific Mortbutton menu up. 2 gestures to anything is my goal. Hbutton often can allow only 1, but I only get 2 keys out of it CommMgr/Record & Camera, my "IE" button longpress seems to be commandeered by VueFlo (cute but pretty useless). If I use that the AEBPlus doesn't seem to work on the other keys.)
UPDATE: I reinstalled AEBPlus, this time with the PC/Activesync installer instead of the cab. The cab installation I did didn't seem to change things. In any case, AEBPlus is working now.
Thanks!
Janis said:
The lack of hardware keys (without the keyboard attatched) on the x7501 was my biggest reservation while deciding to buy it. Now I'm having trouble with AEBPlus and HButton (would be perfect if I could use AEBPlus & assgn Hbuttons to the Long Press mode, but it doesn't work). I can't seem to get the flexibilty in button assignments like I had wiith my wizard, I think because a lot of the long keypresses are OS assigned and not UI available.
I don't want to start reg hacking in my random ways if someone has more experience, or better software ideas, and would be willing to share it.
(I keep my unit in the case without the buttons locked when it's in standby, so if I hit a hdwe key, I only have to do that once to get a specific Mortbutton menu up. 2 gestures to anything is my goal. Hbutton often can allow only 1, but I only get 2 keys out of it CommMgr/Record & Camera, my "IE" button longpress seems to be commandeered by VueFlo (cute but pretty useless). If I use that the AEBPlus doesn't seem to work on the other keys.)
Thanks!
Click to expand...
Click to collapse
AEButton will generally do long presses, double presses, and triple presses... if they are available. As you mention, this seems to be a hardware problem. Example, the "e" (internet) button uses the long press to activate/deactivate the motion sensor within your browser.
As a former Wizard owner, I know where you are coming from. Remapping the "e", "record", and "Win" buttons has given me about 9 quick launches, one of which is WkTask which gives another 12 on a pop-up panel--not to mention showing all open windows on the top bar. Also, the big screen makes iLauncher usable. And I still use good-ole SmallMenu. So I'm doing OK with opening things quickly. But I do miss having all those button launches from the Wizard.
Doing better
HButton and AEBPlus don't play well together at all.
I'm on AEBPlus, post flash, and don't get any long-presses, but I have 3 possiblilities on each of the buttons. Along with MortButtons and actually using the CommMgr instead of hdwe keys, I seem to be getting along well enough.
I had the basic edit commands (select all, copy, cut, paste) assigned to a key in AEBPlus, and turn on/off BT and WiFi. That's what I miss. I use MortButtons for it now, so it's a two-step process, but it works.
The problem with "long keypress'es" for many buttons like Ok/Win/VueFlo etc) is caused by keyboard driver implementation and may not be resolved on application level. The button driver returns both "key was pressed" and "keys was released" events simultaneously, right after button was phisically released. So application could not define time period button was in pressed state to decide if it was long or short keypress...
As for BPlus configuration for my Athena (I have no keyboard at al and use bplus only):
* Button 2 (40C2): (IE button)
1: Call default handler
2: "Messaging"
3: "Notes"
* Button 3 (40C3): (wireless manager)
1: Rotate Screen
2: Show Actions Menu
3: Switch Flashlight Off/On
* OK key (4075):
1: Press Green Button
2: "Contacts"
3: "Calendar"
* Windows key (405B):
1: "Notes"
2: "File Explorer"
3: Show Actions Menu
* Enter/Action (000D):
1: Call default handler
Long: Task Manager
* Volume Up (0075):
Change volume or...
1: Volume Up
2: Backlight Up
Long: Backlight Level 10
* Volume Down (0076):
Change volume or...
1: Volume Down
2: Backlight Down
Long: Backlight Level 1
Action menu items:
Rotate Screen
Switch BlueTooth off/on
Switch WiFi Off/On
Trigger Online
Disable "Power off if not used"...
Device Lock
Click to expand...
Click to collapse
P.S.: I reviewed this forum very occasionaly so you'd better to ask me via e-mail if any
AE, love the program but have one problem. The "ok/close" function is never "close", just always "ok".
The only way that I know of to map the OK button to really be "ok/close" is to configure an hbutton key to be "ok/close" and then use AEbplus to make that hbutton.lnk to the OK key. It's a bit convoluted and requires both programs being loaded and running (hbutton uses more memory than aebplus), but it's the only way to make it work.
Any way to fix the "ok/close" function in AEbplus? Even when there is an "X" in the upper right corner, AEbplus only minimizes the app, never closes.
Has anyone tried remapping or assigning the keyboard buttons to launch applications?
===
Is it possible to get the Half-Press-Function of the Camera-Button assigned for normal working(windows-mode, not camera-mode)??
greetz