If I check in "Settings-System-Power-Advanced-On battery power" to turn my JAM off if it is not used for some time (e.g. 3 minutes), it goes off and then I can not turn it on. I tried to push/hold power button, nothing helped but soft reset. If I turn my JAM off manually by pushing power button I can turn it back on manually too. But after 3 or 4 times it acts just like it was turned off automatically, i.e. iregardless if I push or hold power or any button, LED flashes green and the phone does not turn on. The worst part of it is after I push Power button trying to turn my JAM on and LED indicator starts flashing green (and JAM still remains off) if somebody tries to call me he hears the signal as if my phone is ringing (not busy signal or "The number you dial is not available right now" etc.)
Does anybody know what the problem can be? I've got this problem even after hard reset with no third-party applications installed.
non functioning of on/off switch
Check the connectors of your battery on the inside of the JAM. I had the same problem and I found out that one of the connectors did not really "touch" the battery.
I checked it. The contacts on the battery look like they were scratched by contacts on the phone, so I'd think the connectors are in good contact. I even tried to put a small piece of paper between the battery and phone bodyon the left side to make sure it is really pushed to another side, it did not help either
JAM does not turn on after being turned off
Did anyone ever find out the answer to this??! I have the same problem with mine except it's a bit random - mostly doesn't turn back on again after an auto power off for a long(ish) period of time - like at night.
sounds like a possible fault is occurring. Best thing is to do a full backup of your system and then do a hard reset your device and see if the same thing is still happening. If it is, try the positioning of battery as suggested in earlier posts and if still happening, then a handheld service is required
how the hell do you turn off the device, if i press the power button once the screen goes completely black and i cannot tap anything but i can still recieve calls and if i press any of the buttons it comes alive. if i press and continue pressing for two seconds, the screen simply dims and i can still tap on the screen?
so how do you switch it off?
and if you reset how do you prevent it from loading the T-Mobile customization?
Also, mine has a dead pixel and i have just opened it can i take it back as faulty? it's only one dead pixel but it's really really annoying...does it count as a fault. i'm gonna try and take mine back tomorrow
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Longkesh said:
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Click to expand...
Click to collapse
Well, when i do that the screen goes blank but i can still recieve calls and if i press any of the buttons it goes back on again!!!!!!!!!!!!
To totaly turn off the device you need to slide the battery lock button out and then back in. It is the only way I have found to totaly turn the device off.
To lock the keys go into "settings" then "system" and choose "button lock" then choose "Lock all buttons except power button".
John
oh, i see. i thought it was like the other phones, nokia SE etc.
thanks alot for all your replies
thank you
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
sayreul said:
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
Click to expand...
Click to collapse
I dont think it has anyhting to do with PDA. I have had 3 PDA's before. All of them had an "off" button that turned the thing off. Ditto for phones. So this is just Microsoft's strange decision. Dont make the guy feel back just because he is thinking logically - and they are not.
I've had quite a few PDAs over the years:- Casio E80? Psion 3, 3a, 3c, 5, 5mx, iPaq 3630, XDAI, XDAII, MDA Compact.
None of them have ever had an off button. They turn off the screen and may even slow the processor or put it in sleep mode. But they all kept their memory powered up and clock / alarms / appointments alive at all times.
This may change in the future as flash ram is now fast enough that you could actually run stuff from it so you could truly kill power (apart from clock and wakeup stuff) without emptying your memory.
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
skagen said:
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
Click to expand...
Click to collapse
So, if your Palm completely powered down when you pressed this magic "off" button, how come the alarms still worked? How come it woke up when you pressed any of the four application buttons or tapped the screen? How come your data was still kept in RAM?
More wisdom from the skagen...
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
But this is not so for most PDA:s on the market.
Most PDA:s will go into some kind of sleep mode when you press the "off" button. And mostly it is not even a true sleep mode, a lot of processes are still running, and even network connections can be kept active. This is also the way most PDA users would want their PDA to work. Also, the way most PDA:s are built, a power down means resetting everything back to defaults and thereby loosing all of your data and third party applications. This could be cured by using non volatile RAM for all of the memory, but I guess there is probably a good reason why this is not normally done.
Actually, on most modern computers a short tap on the power button will put them in suspend mode and holding it for more than two seconds will turn them off. So the only thing that is really strange with the PDA is that a long press on the button will not even put it in sleep mode but only shut off power to the display. And as I actually don't know anyone that has ever used that worthless function I think they should probably replace it with a "real" sleep mode, where all of the hardware is actually shut off except for support voltage to keep the memory "alive".
bamse said:
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
Click to expand...
Click to collapse
On N 6100 ,and on all nokia phones, the clock alarm wake's up the phone... You then have a choice of whether to activate the phone or not...
Same with all the Siemens phones I owned ( 4 so far). When shutting off the phone, the clock and alarms keep working. The only thing that does not work, off course, is the radio so incoming calls are diverted to voice mail. But with the phone off, the alarms still wake me up!
It would indeed be a good idea if using the power button on any type of XDA would turn the device really off, using power only for keeping the clock working and the data stored...
If the alarms jeep working on your phone when in "off" mode it is not actually off but in a low power mode with the phone functions turned off. So what you are really asking for is that the power button should turn off the phone but keep the pda running. This seems quite useless to me. Exactly how often are you in such a hurry to turn off the phone?
Yes, the device is in sleep mode, but it is a very deep sleep indeed, since it uses close to zero power. When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button. Seems like rather a hassle, doesn't it, compared to a normal phone? So I don't mean for the PDA to keep running ful operations, but rather to power down to a level where it only uses a little power to keep the storage working. And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
This guy is unbelievable. You were claiming that your Palm turned completely off when you hit the off button - not a cellphone, jerk.
Koksie said:
When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button.
Click to expand...
Click to collapse
Wrong - programs that can be _are_ suspended when you put the PDA into standby. Try it with MediaPlayer.
How do you know the Today screen is still running? Like you know the fridge light really stays on when you shut the door?
Wouldn't you be complaining more (because of the missed calls) if turning the PDA off to save the battery also killed the phone?
Most of us can get our heads round this - the Standby button on the side controls the PDA. The Flight mode controls the phone. Not exactly difficult, is it?
Koksie said:
And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
That's where you fall into sjkagen's trap, again. For the zillionth time, the Jam/Compact is not just a phone. It's primarily a PDA. That's why it costs so much more than a phone. And on a PDA, you need to be able to look up information instantly - not have to wait a minute for the darn thing to boot up.
Click to expand...
Click to collapse
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
Oh skagen, how ignorant you are. Seems you cannot understand pictures, let alone words.
The label on the Jam "off" button is a line through a broken circle, which is the IEC symbol for STANDBY, not POWER OFF. Just like on all other PDAs, and your TV remote control.
See
http://eetd.lbl.gov/Controls/overview/symbols1.pdf
Now look again at all your "phones" which completely shut down when you press the "power" button. What symbol do they have?
Seeing as you obviously have so much difficulty telling the difference between a cellphone and a Palm, a phone and a PocketPC, or a power switch from a standby button, here's another teaser for you.
1. How do cellphones manage to keep their memory when they are turned off or the battery is removed?
2. What is the difference between the memory in cellphone and that in most PDAs?
3. Why do most PDAs have Standby (Soft Off) and not Power (Hard Off) buttons?
Wow, seems like some people are getting really sensitive when I call the Magician a phone... Sorry if I insulted you guys, it is just that I compare it to a phone because I use it for that the most, but I do understand that it is actually much more than that!
I have no problems with the way the sleep button works, it is ok for me, I just wanted to say that there are other possibilities that could have been used to map the button to. Especially since some people would have liked the button to work more "phone wise". But since it is primarily a PDA, I see that this current application is the most logical thing for the button to do.
BTW you are totally right that most running apps are termintated when pushing the power button. Although WMP stays active in the running programs menu, the music is cut off. However, since the prog stays loaded, does this consume more power than shutting it down completey (e.g. with SPB Pocket Plus)?
I think the Today screen stays loaded BECAUSE IT IS RIGHT THERE AFTER WAKE UP, just as you say: it does not have to be booted first. BTW: I have a little window in my fridge door to check wether the light goes off .
And please guys, don't call each other jerks or ignorant just because someone's questions or remarks anoy you. Reply polite or don't reply at all!
Hi all,
I upgraded to an O2 Exec a little over a week ago from a Blue Angel.
Initially I had a few concerns about it, but thankfully I found this forum, and have managed to get a number of enhancements, from increased storage and better radio (v1.09) to being able to turn on the flash light using a hardware button. My Exec is now running faster than my Blue Angel ever did, and hasn't frozen once. I've already become quite attached to it.
One thing that I think would be useful would be to have the unit turn on when the lid is opened, and off when it is closed. In the Power settings you can uncheck the box that turns off the device if it is not used for x mins, which has the effect that the screen will come on whenever the lid is opened. However, because the device is still running the battery still takes quite a hit even though the screen is turned off, and even when you lower the cpu speed.
Is it possible to turn the device on and off by opening and closing the lid?
Cheers
Rowan
Bump
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
jmdrizen said:
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
Click to expand...
Click to collapse
You're not really going into standby mode by closing the case, try switching on wifi or bluetooth and look at the flashing indicator LED, it will still be going whien the case is closed. Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
shuflie said:
Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
Click to expand...
Click to collapse
From what I know, the Universal has no real OFF mode, only standby, EVEN WHEN YOU PRESS THE POWER BUTTON. On mine, BT and WiFi still flashes even when I press the power button or just close the screen.
Pressing and holding the power button turns the backlight off, a quick press (or tap as I said before) makes it go to standby and should turn off everything but the phone part.
Okay well weve taken a really fun detour discussing the technicalities of standby and 'power off' but lets digress for a moment back to the original topic...
Rabangus, seems the best option you have is what you were doing. The hit to battery shouldnt be that large. I gave it a try not too long ago the way you and the other member had it set up again, and yes youll definitely have to charge it every night but it was doable. But I wasnt using wifi or bluetooth either. I am surprised that using Xscaler it still takes way to much battery. I assume thats what you are using to lower the CPU.
Oh well unfortuntely thats the way it is chief.
Hi guys...
I am as techy as the rest of yew, maybe more so, but I am having a problem understanding one thing about this phone. I know it is something very simple that I am missing, but I can't find anything about it anywhere in the docs, either?
How does the "auto power off" feature work? What I mean by this is, I know we can turn the power off after two minutes or whatever, but I see that the green GSM radio light is still flashing. That's good, that's what we want because we want to be able to receive calls.
The problem I am having is that after a time (I am guessing it is the two minutes?) I can't get the screen to come back on? What am I missing here? Is it me, or is it a bad phone? Auto power off seems to make the phone unuseable until a soft reset.
I tried pushing the power button, nothing. I tried HOLDING the power button, nothing. I tried pushing the TALK button, nothing.
Is the auto power off different than pushing the power button once and putting the device to sleep? What I want is the device to go to sleep after two minutes. I want to be able to use the phone again without doing a soft reset every time.
I know this is something easy, but I can't quite figure it out?
Thomas <><
[email protected]
www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come The Light: A View From Inside The Autism Puzzle
Author, Light On The Horizon: A Deeper View From Inside The Autism Puzzle
I've been having a similar issue with my 8125. I seem to also have a problem when I turn the device off. I've been trying to pinpoint the circumstances, but haven't had any luck as of yet.
Have you made any progress with this?
hold the power bottom for 3-5 seconds , there will apper a Yes/No dia.tap yes will real shut off. Not good at eng.But is it easy to understand ?
i had a similiar issue recently on a phone i had forever, turns out that i installed GPRS connection monitor that turned the backlight off on my phone... after hitting the power button to wake it up it appeared my screen was still off, so if i turned it at the right angle i could see my today screen.. meaning the backlight was off, i had to keep it at that angle and navigate into the setting menu to turn the backlight on.. i couldnt find a fix for it so i uninstalled the GPRS monitor and havent had the problem since
Anybody know if there's a way of keeping my Trinity in standby even when a text message comes through - I keep the thing in my pocket and if I don't look at it straight away after a text has come through, all kind of things happen - programs get launched, photos get taken, voice memos are created, just from it moving around in my pocket after un-standbying itself!??
Thanks
Lock the screen and when a text comes no programs will launch!
Nope...
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
flight mode
tjw2007 said:
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
Click to expand...
Click to collapse
Not so on mine when it is locked it stayes locked! The screen will come on but the machine stays locked.
What mine is doing is when a text comes through, it seems to be causing the device to unlock, because the screen will take touch commands - I need to be able to lock the screen and get it to stay locked even when a text comes through. Any experts out there who might know how to achieve this?
Thanks
What is flight mode anyway?
OK, let me put this another way - is it possible to lock the screen until you press the standby button, so that nothing else unlocks it such as a text message or phonecall?
Thanks
I don't have this problem. My screen is set to go off after 1 minute. When the phone is in standby, all I get is a tone and the orange light flashes. The screen will not come on, unless I press the power button.
No input is accepted when in standby by the screen or any button except the power button - check your settings
I also have it set to auto-lock after 2 hours, so even if I get a text, and turn the screen on, then i need to put the password in before the screen unlocks
i use my m700 the same as you with no problems
RESOLVED!
Managed to put the device lock option on the 'Today' screen and this keeps the whole device locked (screen & all) no matter what happens, until you press the unlock option on the screen. Hooray!