Hi,
Got my Jasjar today and very happy with it. I am in and out of a LOT of Wifi zones daily so was wondering if there is a way, when WiFi and GPRS are both on and im in a WiFi area all net connections use WiFi not GPRS/3G if both are active.
I did a test and it seemed my messenger program was still using the GPRS connection when on the WiFi Network.
Cheers
Stot
I need to get a proper answer - but I have discovered this.
I walked home from work the other day on MSN using 3G.
I arrived home, and the unit picked up my WiFi signal and connected.
I then dropped the phone (radio) link using the control panel.
The MSN connection remained active, and I remained on WiFi even when bringing up the phone radio again. WiFi was definately being used in this instance.
I wasn't able to tell whether or not this would work WITHOUT turning the phone part off and back on again.
Yeah that is whats happening here. I put on GPRS monnitor and set it to watch the GPRS connection only and hit my WiFi spot, even when wifi was connected it was still using the GPRS to send/recieve internet data. If I then turn off GPRS the it carrys on as if nothing had happened on Wifi.
With the cost of mobile Data these days it really should always default to a connected WiFi connection if its available and not the GPRS/3G connection.
I suppose a utility that disconnected GPRS when a WiFi connection becomes active would effectively do this as once you are out of the WiFi spot GPRS would be initiated to make connection.
Cheers
Stot
Hi,
I have a brand new xda mini s with 2.16.9.1 Rom. I use IM a lot so when I am at home I disable the GPRS and use wifi however the battery runs down within 1/2 a day is this the norm?
I use Agile for IM and when you are on GPRS and press the power button the client stays active and uses the operator network. When you do the same but via the wifi connection the connection is dropped and GPRS is initiated. This means that wifi cannot be used when the phone is in standby mode?
Also does anybody know how to disable the GPRS settings easily e.g not via editing the settings so that you only use wifi regardless of if you do or do not have coverage.
Marc
Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?
If you set your WiFi connection as connected to the Internet instead of Work, and in the network adapters setting (settings, connections, network cards, network adapters tab) set that your network card connects to the internet, once you establish an internet connection with WiFi, it should kick your GPRS connection off. On my phone GPRS still tries to connect once in a while for some reason, but never does, since the WiFi internet connection just keeps kicking it off.
abc123MDA said:
Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?
Click to expand...
Click to collapse
rassah's method is more professional than mine and better perhaps. I'm lazy so I just go to connections button below on/off button and then tap off the GPRS via button that looks like a PDA with two arrows. If GPRS tries to reconnect there should be a popup if you have wifi on that allows you to cancel it's reconnection. This does not disable the phone.
Mike
thanks - i will try this - do you know if this will affect the dirct push mail?
Just thought this may help, found it on Modaco.. Works a treat, just toggles gprs data on and off... Very easy and works
Not sure how OK it is to post links to other forums but as it is free software I guess I should be OK...
http://www.modaco.com/New-FREE-Utility-t246171.html
Phil
superb application - especially usefull when roaming
Just what I needed, going overseas next month, I don't want to use any data while there.
Is it possible to maintain a data connection and phone connection at the same time?
Currently, if my phone is connected to the internet through an HSDPA data connection, the connection is dropped when I receive a phone call over 3G.
I use my niki's HSDPA connection (FarEastTone in Taiwan) for connecting to the 'net on my home PC, but it is also my primary phone so I would like to be able to keep the internet connection alive when receiving or making calls.
Any ideas?
Thanks
EDIT: It appears to be holding the connection now, so I can stay online and talk on the phone at the same time, but it kept disconnecting last night. Here's hoping it lasts.
Everyone,
Apologies, and I know this is a stupid question, but when at home with my htc tound pro, with WiFi on, and connected, why do I need the phone on too for the WiFi to work,...?
Also, when both are on and working, which system is used, i.e., the SIM card connection or the WiFi connection,...?
WiFi I pay a flat monthly rate for unlimited data, with the SIM card I am on a fixed amount of data transfer per month,...
Thanks for listening,
ek
Well..
You may be using an application that is not Wifi aware. So, it demands a GPRS/EDGE/3G connection. So - in effect - it's not actually using the Wifi connection.
If you can use the application with Wifi on, and phone off - it's Wifi aware. (Meaning it can utilize Wifi).
If you can't use the application without the phone being on - it's not Wifi aware or has not been configured to use the Wifi.
What application are you having issues with?
thanks for getting back to me,... WM Professional 6.1 and the Internet Explorer program when going on to the web,... i'm just wondering which systems does the phone use when both are functioning,... am i using the gprs from my SIM card or am I using the wi-fi in my home,...? and why do i need the phone turned on to use the wi-fi in my home,...?
thanks again,...
ek
you can see if it's using gprs on the icon for signal str if it's showing animations
it's using gprs
otherwise it's using wifi
if you set
settings-connections-connection-advanced-select network to my homenetwork
it dont use gprs
did you set the gprs settings to your gsm provider?
i would prefer wifi over gprs/3g anyday unless if your home internet is extremely slow ( <300kbps). the battery life would be almost equal so why not a faster connection?
Rudegar said:
you can see if it's using gprs on the icon for signal str if it's showing animations
it's using gprs
otherwise it's using wifi
if you set
settings-connections-connection-advanced-select network to my homenetwork
it dont use gprs
Click to expand...
Click to collapse
I'd like to understand how WM decides which network to use when it has a choice e.g. HSDPA and WiFi. I've looked at the settings mentioned above and I currently have Internet using Contract Internet (HSDPA) and Work using WiFi as the WiFi networks I connect to are firewalled and privately addressed.
What settings should I have to ensure that when I have the choice of WiFi and HSDPA (at home) I use WiFi, and when out and about I use HSDPA?
Everytime an application wants to connect to the net:
- If wifi is connected and GSM isn't, it uses Wifi
- If wifi isn't connected, it tries connecting to GSM and will use that.
- If both are connected - we don't really know what happens.
When you're at home, check that GSM is not connected (no little E, G, 3G or H on the signal bar icon, disconnect it if connected), turn on wifi, wait until the arrows have stopped moving on the Wifi icons, and now you can launch the program that wants to connect to the net, and it will use wifi.
If at this point you get a popup about the phone connecting to GSM data again, then there's a connectivity problem on your Wifi and the device can't reach the net through it.
You might want to install Modaco Nodata, it allows you do disable automatic connection to GSM so that you can be sure it doesn't connect when you don't want it to.
mine never use gprs when it have wifi
I have a Touch HD and I can make things work fine by manually turning off the data connection then turning on WiFi in the comm manager when I'm at home or vice versa when I'm out and about.
I would have thought win mobile 6.1 would have been a mature enough OS to allow this to be configured automatically. This and Opera are my only outstanding issues with the HD.
Strange. I can easily shut my phone off, enable wifi & browse fine.