Database Users

Flashing ROMs is dangerous !!!

There's two type of ROM upgrades: Operating System ROM upgrades and Radio Stack Upgrades.
Radio Stack Upgrades:
Radio Stack upgrades are distributed by the devices resellers. They come in packages with names that may or may not include "Programme B" or "RSU", and they are usually about 2 MB in size. Version numbers are a mess, and lower version numbers do not mean earlier versions. There's at least three different paths of version numbering out there, and the version number on the file doesn't always match the version number displayed at boot and by 'Device Information'.
The official Radio Stack Upgrade process is a mess. We've seen way too many people wreck their devices doing nothing weird or strange. Our advice regarding Radio Stack upgrades is to get them from your own device provider (so you know it's for you type of device: 900/1800 or 900/1900 MHz), and to only upgrade if you know the upgrade will fix known issues that are bothering you.
Operating System Upgrades:
Operating System upgrades are distributed by the resellers in packages whose names may contain "Programme A" or "RUU" (to confuse things, RUU stands for "Radio Unit Upgrade", even though they do not upgrade the Radio part but the PDA part). Operating System upgrades are usually 15 MB in size, and unless you use our utility 'adaptROM', they will only install on phones sold by specific resellers in specific markets.
In this community, the OS is sometimes also distributed as .nb1 file, for use with our XDArit tool. These files are often zipped to about 15 MB, uncompressed they are 32MB (well: 32 MB minus 256 kB actually).
We've seen a number of people doing terrible things to their devices by upgrading their OS ROMs. Here's what we've seen:
- It appears someone is distributing an EXE file for the PPC2003 ROM that contains a part of the OS in the spot where the bootloader needs to be. People that use this EXE to upgrade to 2003 may experience problems immediately or later on, possible making their device unusable.
- We've observed our XDArit tool in the hands of people that should not be using it. If you don't know what a DOS box is, or think you can rename .nb1 files to .nb0, or if you generally do not feel technically proficient, do not use XDArit. It's as simple as that.
(We also blame ourselves for this: XDArit is very counter-intuitive in some parts, and is long-due for an overhaul....)
- Apart from the above, there seem to be problems for people getting back from PPC2003 to earlier versions of the OS. We've been busy doing other things, and we haven't really researched this yet.
- It seems the exe files Jeff makes are OK, and if they aren't, people would know pretty quickly. We advise against running exe-files from others until we've found what causes this 'bootloader mangling' we've observed.

Thanks for your warnings. I just checked my device information. It reads rom version 3;14.06 ENG, Rom date 10/01/02, Radio Version T313. Being not technical at all. Your advice is not to upgrade the Rom or de radio version.
But that leaves me with some problems. F.i. when I try to synchronize with Outlook on my pc. I keep losing mails. The only mails being synchronized at all are those from my inbox. A series of attachments cannot be converted and there is no way to know which mails they are in. I was also hoping that a rom-update would solve my constant memory-lack.
Are there any other solutions?

Upgrade Fails
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...

Re: Upgrade Fails
scalci said:
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...
Click to expand...
Click to collapse
:wink: it's same problem that i have but the slution is download the XDA-dev's XDAtools.exe and cook your ROM then save it on your SD-card
for me it's work 100% my Qtek provieder in Saudi Arbia said that you can't downgread ROM after you do upgread but what ?? it's work
:lol:
[email protected]

Upgrade radio fail
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.

After upgrad radio from 4.16 to 4.21, My O2 does not reset or hardreset normally. After a long process, I get a blank screen with only input icon on the lowwer right corner. How to fix it now?

problem solved.

inaccess said:
problem solved.
Click to expand...
Click to collapse
How have you done it ?

Re: Upgrade radio fail
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance

Re: Upgrade radio fail
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum

Re: Upgrade radio fail
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard

Re: Upgrade radio fail
droletbe said:
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.

Re: Upgrade radio fail
Weezer-DC said:
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum
Click to expand...
Click to collapse
Yes, I got the Wallaby bootloader and it said GSM failed.
Pls show me where about I could get more info on the forum.
ThanX in advance.

Re: Upgrade radio fail
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help

Re: Upgrade radio fail
droletbe said:
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help
Click to expand...
Click to collapse
Now everything works ! And this accident "forced" me to buy an SD, so I will not be so limited by the 32Mb limit
Thank you very much

help needed....
i hard reseted my qtek 1010 .... its like 30mins ....and am still gettin 4 bands white red greem blue... is that normal ...that hard reset take this much time... if this si not normal ... what should i do next

Bootloader not recognising sd card image
I am having the same problem. When pressing power and reset, bootloader shows v 5.17 GSM fail.
I have an sd card which has a new bootloader and nb1 file on it. I do a reset with the card in the slot and i get the same screen v517 GSM fail. From what i have read i should be getting an option to upload the new rom.
Can some one help me out please?
If I currently turn the device on normally activesync does not recognise the device.....
The sd card I have was configured using the xdirt programme and it appears to have worked as the sd card is shows not formatted now...

Thanks for all the info and warnings, just got my XDA II today and Im not too hot with it yet so I guess I will be leaving the ROM's alone for the time being

Peter Poelman said:
Radio Stack Upgrades:
Click to expand...
Click to collapse
We have several system where the GSM rom is toast. Is there a way to get a GSM Rom to SD w/o using the PC Monitor program?
The systems will successfully bootup and we have tried loading the GSM rom using RSUpgrade, but it fails after 1%.
Is there any other way to recover the GSM Rom?

You may try speaking to Cgigate on this forum, he has hardware methods of programming the chips directly, whether it works for the radio stack as well as the bootloader and rom you will need to ask him.

Lost rom SD card backup file-How to original downloaded rom?

I have lost the SD card backup before appling the 27 MB anakasy/MKS patch.
I tired to flash using the original clubimate downloaded 1.11 but after the same my STORAGE folder is missing.
Please help to slove this issue...

This is weird. I have twice done the Anansky and then installed another normal ROM on top of it, with no probles whatsoever. Maybe it's the I-mate ROM you are installing that's bad? Have you tried another ROM?

I have tried JAM 1.06 ROM and O2 1.11 ROM but no way get it work. Still same issue with storage.
One thing I noticed that before this issue I can flash the ROM after diabled the activesync and phone is normal mode. Now after this issue I have to switch the phone to boot loader for normal downloaded ROMs to start flashing.
Please help.....

Re: Lost rom SD card backup file-How to original downloaded
nishadks said:
I tired to flash using the original clubimate downloaded 1.11 but after the same my STORAGE folder is missing.
Click to expand...
Click to collapse
It sounds like you're only flashing the radio+ce. Can you verify that there's a file called ms_.nbf in folder you're updating from?

Yes it contain all the three files ms_.nbf, nk.nbf and radio_.nbf...

I don't think you even should get to a point, where you can see which files are included in the installer. Just download the right ROM for your Magician and run it. Too often we see ppl having problem running a hacked upgrade and instead of just reverting to the original thing, they try to hack some more! Well, not all hacks works...
Other than that, I see 3 options as it is right now...
1. Redo the whole thing! Try to flash the Anansky and see if you can get that going. If you can, try running the normal ROM update afterwards. If it doesn't work...
2. You can ask for a kind soul with the exact same original branding as yours (I-mate, Qtek or whatever and same country) to upload a backup of his ROM. Overwrite the first 416 bytes from your own ROM and try to install this new ROM. If that doesn't work either...
3. Get the ROM flashed in a service centre.

Well.. You have something like ten active threads about this flying all over the net, yet when someone takes the time to try help you, you don't reply. You just move on to the next thread. If you don't take those trying to help you seriously, then I for one won't waste any more time on this...

I have solved my JAM's problem. Backed-up my friend's JAM ROM and restored in my JAM. Now everything working fine. Thanks a lot for all help...

wallaby and no update or downgrade possible

Hi Everybody,
after nearly 2 years of inactivety I am back...and with a problem-after I got to involved in business I lent my xda to a friend, he had no better idea then to put a strange rom on it.
Now to my problem. I cooked a downgrade rom 3.17, downloaded it. I used the OSImage Tool to write the file named NK.nb1 on my sd card.Hardrestetted my xda and there I am. In the wallaby bootloader. He does not ask me to upgrade from the card...nothing....
I would do it over the cradle...but that does not work because he installed some kind of se rom.
I am stuck...realy.
Could anyone be so kind and give me a hint? I looked and read the whole day in the forum...
Thank you
H

Maybe you use a Internal SD-Card Writer?
They often make problems in writing the ROM correctly on the card.
You should try an other SD-Card-Writer or try getting a functioning ROM of an other device by backup....
You can also test the process by backuping your "strange" ROM and try to reflash the backup ROM. This should work and will show you, if you really have some problems in writing the ROM to the Card....
Stefan

solved
Hi Stefan
(Dank Dir, Thema erledigt)
Problem solved. I believe it was my card writer, even 2 of them, which caused the trouble. Both of them wrote the file in a wrong format (dont ask me why)
When I read the how to once more I have seen that I can write through activesync. When I tried that it suddenly worked like a charm.
So thank you again-your hint about the writer solved the problem.
Cheers -or better- Herzlichen Dank!
H

HELP ME P3300 Does not upgrade to WM6 Cause Error 260

Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English

To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!

PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance

...
takes sd card out..
you done uspl.. if not.. click it in my signature..

P800 rom flashing problem

I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.

Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem

mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)

Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse

mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!

Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse

mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?

Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse

mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.

Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility

mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.

I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.

Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards