Related
Let's start a thread of all the reg tweaks ppl have come up with. If they are saved as .reg files (to an SD), we can install them with a mere double-click by using TRE (options>associate), and anyone can contribute to this post WITHOUT having to build .cab files! Why is this kewl; cos when u hard reset it's a real ball-ache to go back into all the forums to find the tweaks u applied and to navigate thro TRE to re-apply them all. This applies particuarly to settings (Owner info etc). Over and above, we are no longer beholden to tweak shareware, but have full and instant control over our settings.
Each tweak should have 2 reg files; Apply the tweak, and remove the tweak (if possible). In this manner, we can have a directory of reg files, and can turn on and off tweaks with a simple d.click.
Attached is a basic set I've compiled. Please let everyone know if any are a problem (ie perhaps whole key gets replaced and overrides something u have already changed). Files described below:
[*]Reg Date_In_Titlebar ON.reg
Adds the date to the title bar, with format according to your short-date format under settiings>regional (or found manually changed in another Tweak I'll cover later). I do NOT have a .reg file that will undo (ie delete) this new key, but it's easy to see what key is being added so u can delete it. <Credit: Well known PPC tweak - I probably learnt from toenailed>
Can someone please find out where we can change the font for this - it's a horrible bold font that doesn't fit in the space available?
[*]Reg Font_Menu_+_Pop_700 ON.reg
Change menus and popups to a smaller font. Nice size, makes VGA look more VGA-like, yet not so small that it fails cleartype nor looks daft. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_Menu_+_Pop_900 DEFAULT.reg
Reset above change to default of 900
[*]Reg Font_System_700 ON.reg
Changes system font to 2 pts smaller. I find that dialog boxes with radio buttons got a bit wierd, and you don;t get much more screen estate height cos of icon sizes staying the same in file lists, so I don't bother with this tweak. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_System_900 DEFAULT.reg
Turn above off
[*]Reg GPRS_+_3G_Always _On DEFAULT.reg
Awesome tweak to make sure ur phone connects to GPRS/3G and stays there. However, you'll want to switch this off overnight etc, which is the main reason I created this post and these reg files. NOTE: you will absolutely HAVE to replace the "MTN SA Web" bit with the name of your connection which you will find in this key using TRE
<Credit: BrettS http://forum.xda-developers.com/viewtopic.php?t=30277>
[*]Reg GPRS_+_3G_Always _On ON.reg
Turn off the above. Remember to change connection name in file
[*]Reg PIE_Homepage_Default.reg
When u press the E (explorer) keyboard key u go to clubimate homepage - annoying. This resets that hard button to whatever u want (current reg file is windows\default.htm)
<Credit: I forget, someone on clubimate forums>
[*]Reg TerminalServices_Cache_Larger DEFAULT.reg
AWESOME improvement in Terminal Services client horrible black blocks. Increases cache sizez - I did not notice an increase in traffic/cost
<Credit: Carnivor from MS KB http://forum.xda-developers.com/viewtopic.php?t=29996>
[*]Reg TerminalServices_Cache_Larger ON.reg
Turns above off
More coming as I go thro the wiki and toenailed tweak posts and extract usefull ones for us lonely Universal users...
can you add the actual keys to here?
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
cos of this thread
http://forum.xda-developers.com/viewtopic.php?t=30396
Doh! That post came up after I started this thread.
Still this thread is useful for the actual .reg files to same n00bies some time (and to save me time too). I'll make sure everything here is duplicated there tho.
Here are a few more .reg files:
Several versions of date_in_title_bar (covered above)
Hide_Screen_Rotation icon
Hide that icon that allows u to rotate screen - but JJ does it automatically so Icon is not so necessary
Regional_settings
These are for me - u should edit file in text editor to customise 4 yourself. Best part is my short date format that keeps date in title bar small and visible
Ringtone_settings
Customise as above
Screen_Speed_Glyph_Cache
Double your screen cache. COsts a LITTLE memory, and improves screen size
Screen_font_'smaller'
Set screen font size to "smaller". This can be changed in "settings"m and I only include it here in line with my suggestion that we have a collection of files to run quickly on reset. You may want to customise as above
SIP_Settings. Ditto
All in updated zip file.
I would really appreciate if anyone can find a way to get rid of the Last Call in the dialer screen... I know its somewhere hidden in Registry, but I dont seems to be finding a way to get tru it...
Having the Last Dialed No. showing rite up on the Dialer Screen is really bothering and if you happened to press the phone button by mistake twice there we go the last dialed no. has been dialed already for you....
Bump: no-one contributing to this learning?
haven't found anything else worth posting yet m8, u got the best ones already :wink:
craigiecraigie4: Thanks for these - great idea!
I have a suggestion:
HKCU/ControlPanel/Backlight sets the backlight duration for the keyboard (in seconds). It's available through the control panel, but I like it set to more than the CP maximum of 10 seconds. Sorry - I don't know how to create a reg file.
To reset, choose another value in the backlight control panel applet.
Don't have any others to add though
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
This one is in this forum:
from davidberrysmith
--------------------------------------------------------------------------------
Any body remember these reg tweaks from himalaya? they still work
*** Speed Up Your Windows Mobile Pocket PC.
1. Open your registry editor o_n your Pocket PC
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
3. Change the value of 'limit' from 8192 to 32768
4. Close registry editor and soft reset.
*** disable start menu animation
Browse to HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
Change the "AniType" value from 6 to 0.
_________________
i-mate jasjar
Click to expand...
Click to collapse
SiliconS said:
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
Click to expand...
Click to collapse
Nice one dude. I can't make the .reg file cos I can only create reg files of the entire key, and there are too many other things under GWE that users may have changed.
Internet Explorer
Somewhere in those forums I found the IE reg hack to make mine 5.5, this helps connecting to my bank account and viewing other secured sites.
read this somewhere
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
But apparently now this is the same feature as the receive incoming beams setting in connections.
Yes, I know that's not free but 90% of all this hacks have been included in Tweaks2K2. And the other 10% are about to be included :twisted:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
craigiecraigie4 said:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
Click to expand...
Click to collapse
With your .reg files as inspiration I'm just about getting there in the same way. I've written down all the steps and I just run through them. I've done this since I had my XDA2 and it makes a hard reset so much less traumatic:
Code:
Hard reset. Wait for Today screen then soft reset.
Connect cable to ActiveSync. Set up guest connection.
Turn off beams, error reporting
Set basic clock accuracy
Copy Step 1 files to root of PPC [These are the CABs for the programs I install]
Run CABs. Leave O2 Connections CAB. Put gps.CAB and PIMAddin onto storage card
Run TRE registry editor. Associate .reg files to TRE
Open the .reg file [This applies my registry settings. See below]
Run O2 connections CAB
Copy all Step 2 files to root of PPC [This adds shortcuts to StorageCard-installed programs to my Start Menu and gives me my freeware email client and PZP icons and profiles]
Run SDK Certs CAB
Run OzVGA. Change all fonts to same size as qVGA
PPC: edit registry: browse to HKLM\ControlPanel\GPS Settings. Delete the DWORD marked "hide"
CPL > Personal > Buttons: match Button 2 to [Task switcher], Button 4 to <Rotate Screen>; Set button lock
CPL > Personal > Menus: ActiveSync, File Explorer, Internet Explorer, nPOPw, Pocket Informant, Task Manager, TomTom Navigator
CPL > Personal > Owner: set owner information
CPL > Personal > Phone: change band to GSM
CPL > Personal > Today: set items to Date, PZP, PocketPlus, PocketBreeze, Messaging; set theme to Windows Default
CPL > System > Clock: Show time on all screens
CPL > System > Regional: Set locale to UK
CPL > Connections > GPS: set program port COM0
Soft reset
Set password for PPC
PC: backup previously sync'ed files folder
PC ActiveSync: delete previous partnership. Don't delete sync'ed files folder
CPL > System > About: Set DeviceID = XDAExec
Connect PPC and PC with cable
Sync only Contacts, Calendar (all), Tasks, Favourites
Sync files. Replace the items on the device
PocketBreeze: import settings
PocketPlus: import settings
PocketInformant: run and let it fanny about
PocketWeather (on PocketBreeze tab): import settings
Run ListPro. Enter registration code
Disconnect from PC
Set up phone speed dials
Set up voicedial tags
Set up ActiveSync via Bluetooth to Workstation
Set up bond to headset
Set up bond to GPS thingy. Choose Serial Port as profile
Start TomTom Navigator. Run through startup.
InternetExplorer: sort out view settings. Set default page to about:blank
Choose Transcriber input method. Import settings file
This is my .reg file that does almost everything I need done in one step:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings]
"Group"=dword:00000002
[HKEY_CURRENT_USER\ControlPanel\Backlight]
"QKeyLedTimeout"=dword:0000001e
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client]
"Keyboard Layout"="00000409"
"BitmapPersistCacheSize"=dword:00000001
"BitmapCacheSize"=dword:00000015
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00004000
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="d/M "
[HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD]
"PieHomePage"="about:blank"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
It makes a massive difference using commercial software that has a reliable import/export process for the settings and this, IMHO, is usually the biggest difference between paid-for software and freeware alternatives.
Silicon, don't u want to re-post your post here:
http://forum.xda-developers.com/viewtopic.php?t=31697
We need more of these 'standard' configs to help new users get up n running without giving up on their universal.
dude, your screen - how?
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Re: dude, your screen - how?
simon_darley said:
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Click to expand...
Click to collapse
You don't want merc!! well u can just f off then! ;-)
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Re: dude, your screen - how?
craigiecraigie4 said:
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Click to expand...
Click to collapse
Whatever it is, it's distracting to have such a big picture in your signature in such text-based forums.
Sorry craigiecraigie4. Don't mean to offend. Just MHO.
Does anybody know how to set under which tab in settings a CPL will appear?
I ask, as I've managed to export the CPL T-Mobile put on the MDA COmpact II to customise the soft keys, and I want it to appear on the same screen as Buttons, but instead it is under System.
BTW, the CPL does work - it gives an interface similar to Buttons for changing what the soft keys do, as opposed to editing the registry. If you want, I can post it here.
Thanks in advance, guys.
Just a question: when you change one of the Soft Keys apps to be run, do you have the <Ok/Close> , <ContextMenu> (all <BlaBla>) options? I mean the options that are not applications?
The reason I'm asking is that I recently hard reseted my Wizard and I stopped the final T-Mobile customization process. But it seems that the Softkeys are no longer present in my control panel, and after adding a SoftKeys.cpl file from a forum, I can only set applications not the aforementioned behaviours (like <OK/Close>).
PS: post the file plz, I'll just give it a try
I think you want to edit (or create) the 'group' dword value under HKLM\ControlPanel\[yourcplkeyhere]\
values seem to be 0 fo rthe personal tab, 1 for system and 2 for conenctions
eg set HKLM\ControlPanel\Backlight\Group to 2 to make it appear on the connections tab.
the cpl sounds handy - can you post it?
Here's the CPL.
Haven't looked at all the options, but you can select New SMS and New MMS, although these rely on 2 files called TNSMS.exe and TNMMS.exe, which I don't see to have to hand. If anyone can post them, that'd be great.
I don't know if it'll work on all devices, but try it anyway.
P.S. How do I find the CPL Key to use in the reg hack above?
I have one which I use for the New SMS function
How to install *.CPL files?
I copied it to Windows directory but it is not there?
Do a Soft reset after copying to the \windows....
then it should be in the Start->Settings-> one of the tabs...
Last night i was playing around with the Program Launcher menu and discovered that you can extend it by simply adding some values in the registry.
The registry key to do all this is:
HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher
Standard the subkeys are numbered from 0 to 29.
You can extend your Launcher menu by adding a new group of 3 empty program buttons by adding 30, 31 and 32 (so new subkeys). Always add keys in groups of 3. So 33, 34 and 35 and so on. Don't know if there's a limit on this one.
A number subkey should contain the following values:
String - DispName
String - IconPath
DWORD - IsReadOnly, dec value 0
String - Path
You can leave the string values open because they are automatically filled in when you add a new shortcut.
Don't forget to adjust the following value also. It's in HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher/totalItemCount (dword, dec value), change to the max number op empty program places. I tried with 50.
You can now disable TF3D and re-enable it again to see the new empty program buttons or you can simply soft reset your device (reboot windows mobile).
This should work perfectly. But some problem I'm having is, after having installed the cabfile with which you can wipe the first 4 (unremovable) program shortcuts, I'm not able to add any program shortcuts anymore. Well i can select a program which i like in the program launcher as a shortcut, but the shortcut is not added to the launcher menu. I uninstalled the cabfile, and rebooted windows mobile, but the problem isn't solved with that. Some one know a solution to this?
TheWizzard2203 said:
Last night i was playing around with the Program Launcher menu and discovered that you can extend it by simply adding some values in the registry.
The registry key to do all this is:
HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher
Standard the subkeys are numbered from 0 to 29.
You can extend your Launcher menu by adding a new group of 3 empty program buttons by adding 30, 31 and 32 (so new subkeys). Always add keys in groups of 3. So 33, 34 and 35 and so on. Don't know if there's a limit on this one.
A number subkey should contain the following values:
String - DispName
String - IconPath
DWORD - IsReadOnly, dec value 0
String - Path
You can leave the string values open because they are automatically filled in when you add a new shortcut.
You can now disable TF3D and re-enable it again to see the new empty program buttons or you can simply soft reset your device (reboot windows mobile).
This should work perfectly. But some problem I'm having is, after having installed the cabfile with which you can wipe the first 4 (unremovable) program shortcuts, I'm not able to add any program shortcuts anymore. Well i can select a program which i like in the program launcher as a shortcut, but the shortcut is not added to the launcher menu. I uninstalled the cabfile, and rebooted windows mobile, but the problem isn't solved with that. Some one know a solution to this?
Click to expand...
Click to collapse
Great tip!
I have the same problem that the shortcuts are not added though...
What does work is to add the path and name manually...
To easily create more keys you can also export 1 key and edit the key name in notepad (increase the number by 1) and import the key again.
I think you need to edit some more keys.
Could it be you need to add the program path as a string value in the root of ProgramLauncher as well?
At least I increased the totalItemcount to 32.
of course you can add the shortcuts manually through the registry, but that's not quite the solution. Are there more people having this problem?
Yeah I have the same problem, I get empty boxes to add more programs but can't seem to make the button register a program unless done manually via registry.
Great find though, Thanks
i use mine own cabfile, works great, to find it goto xperia rom forum, and one of the sticky post is called FTP, by mostberg, goto mostbergs ftp and goto rom, touch x, addons, there you will finjd the cabs needed for top icons, not home atm, so cant post the cab right now sorry, but goto ftp there it is...
Is this the menu you see when long-clicking on the Hang up key?
Deleted. Sorry.
Thanks
Thanks a lot. I've finally reached to remove that "Business mail" locked shortcut on my TD2. I can now replace it by another one !
here:
http://forum.xda-developers.com/showthread.php?t=534596
smaberg said:
i use mine own cabfile, works great, to find it goto xperia rom forum, and one of the sticky post is called FTP, by mostberg, goto mostbergs ftp and goto rom, touch x, addons, there you will finjd the cabs needed for top icons, not home atm, so cant post the cab right now sorry, but goto ftp there it is...
Click to expand...
Click to collapse
I cant find the file...
i ave add 6 new space for program in the start menu but i cant add the programs... i add the link in the registry, but doesnt work...
help!
any working solution yet??
... and I need some help....
so... i have an HD2... and i want to get rid of each customization after each new coocked rom that i install....
althoug i searched is still hard to figure it out how to do all the stuff... so i'll just post a small request and if someone has time maybe will give me (and the others) a little help...
i need to automize the following...
install a set of cabs:
cookie home tab
advanced cookie home tab
cookia home tab editor
resco explorer
total commander
1% battery indicator
this is easy through UC
cutomization:
disable my location (registry) - i already found a record in the registry that does that
remove all locations - add my home city
regional settings - my home country
internet default location set to internet (by default it sets itself to wap)
sms: delivery notification ON
camera setings - superfine in pics
manila tabs config - just the order in witch they are and the tabs i don't wanna show... i founded in registry also
font set to smallest
vibration (haptic) disable
phone ringtone set to K.O.
sms/mms set to alert fader high no vibrate
email set to alert shine no vibrate
missed call no alert
ring type set to ring no vibrate
quiet ring se to ON
pocket ring mode set to ON
no charge over USB
set clear type
email account (exchange - google sync)
cookie home tab settings: CookieHomeTabEditor
callendar look forward 31 days
shortcut grid 4x4
1 tab of shortcuts
default page: no1
shortcuts in the home tab... i found those in the registry also
facebook account credentials
and i think that's it...
with the os customization i know i need to insert somehow the registry settings... but i don't know how.... with chteditor settings and facebook i guess is still registry settings but where and how?
I've seen sashimi... but still... I know how to use it... I don't know how to configure it...
So... plz HELP...
lots of cooked roms have an auto instal feature. put all your cabs in a folder called autoinstall on your sd card then when your phone boots after a flash/hard reset will install them.(let the phone sit for 5 mins when it first starts up, thats when it installs them.
as for the settings, build your own cab. I use wince cab manager. takes a little time but once its set up you just run it after everything else has finished (don't auto install it, cos the cabs don't necessarily instal in the right order. so for example you instal an opera tweak then install opera your tweaks are overwritten.)
my tweaks cab installs my custom lock screen, enables htc magnifier, tweaks opera cache and user agent, decreases screen sensitivity, and a few other things.
Even better, heaps better, get sashimi, study the tutorials, then you can choose which cabs to install to internal meme, which to sd, what reg keys to import, what static files to copy where, and if you need it, add scripts, certificates, run EXEs, whatever you ask.
I use mortscript for doing customisation stuff.... I generally run nrg rom's which use XDA_UC, so I can drop .reg files in the folder and it adds them on rebuild.
Code:
#Backup Ringtone Settings
outfile="\storage card\xda_uc\RingTone.Reg"
If (FileExists(outfile) = 1)
Delete(outfile)
endif
key="ControlPanel\Sounds\RingTone0"
Category=RegRead(HKCU,key,"Category")
SavedSound=Regread(HKCU,key,"SavedSound")
Script=Regread(HKCU,key,"Script")
Sound=Regread(HKCU,key,"Sound")
WriteFile(outfile,"REGEDIT4^NL^")
WriteFile(outfile,"^NL^",true)
WriteFile(outfile,"[HKEY_CURRENT_USER" & "\" & key & "]^NL^",true)
WriteFile(outfile,"""Category""=""" & Category & """^NL^",true)
WriteFile(outfile,"""SavedSound""=""" & SavedSound & """^NL^",true)
WriteFile(outfile,"""Script""=""" & Script & """^NL^",true)
WriteFile(outfile,"""Sound""=""" & Sound & """^NL^",true)
That is from my backup script. Creates a .reg file with the settings for the ringtone stuff in to the XDA_UC folder so my last ringtone settings carry across
thanks guys....
use the installation of software i got it... and if the rom isn't UC capable i can do it with sashimi (i have seen the tuto videos and read the doc)... also with sashimi i can do my email settings...
what i didn't understand is how to build my customization.... i just search every registry record... write it down.... and then what?.... sahii says to put it there somewhere... but not exactly how to create it.... and what if a custom thing it is not present only in one place like user or local machine?...
don't understand your question. But to create the file, use the regexport tool. You build an INI describing which registry keys you want. The tool extracts them and creates a backup file for future re-deployment.
Been searching for a topic like this for a while!
Thanks for starting this thread!
I too am a flashaholic and REALLY get frustrated at having to customize EVERY time you flash...
Installing apps is easy, dump them into the UC folder on your SD card and voila.
The tricky part is getting the Regional Settings and Time Zone sorted. I tried exporting these settings from the Registry and putting them into the UC folder, but it still doesn't work...
Just use SASHIMI. This awesome soft does everything you mentioned above!
BTW: SASHIMI has a big help-file/HowTo included and you can find good video-tutorials on youtube as well.
i'll try sashimi more... and get back...
so for sashimi... actually you need a clean install with all programs and customization manually made and after that export the registry settings?
ok.. i've found CeRegEditor... with this I saw that I can export my registry... now I need help in order to localize all settings I need... and to avoid to miss regs that are placed in more than one place...
disable my location, manila tabs config - just the order in witch they are and the tabs i don't wanna show... and cookie settings for home layout - HKEY_LOCAL_MACHINE\Software\HTC\Manila
phone ringtone set to K.O., sms/mms set to alert fader high no vibrate, email set to alert shine no vibrate, missed call no alert, ring type set to ring no vibrate - HKEY_CURRENT_USER\ControlPanel\Notifications
I don't know if it is enough for the mentioned settings or if they appear in other places also.... i found out that ceregeditor only exports folders not single keys...
to export whole paths of registry keys, just go into totalcommander's registry editor, in double folder view, then COPY the selected folder of registry keys to a physical folder on the device, it will transparently create a .reg file
To import the reg file back again, either you use sashimi, or you COPY the .reg file from the memory into the registry with totalcommander
Pretty impressive huh
ok.. my first try was a mess....
i used sashimi... put the cabs all together.... this worked ok... although i have to change some names to install them in the correct order...
i made some reg files with CeRegEditor via activesync on the computer... i've put them into reg folder.... but nothing was imported... i think the format was not ok... at least i know what regs i need for the moment...
and last... i made an xml via sashimi/makisu... but this didn't worked either...
i'll keep trying....
LE: ok... it seems that i managed to make with some of the registry... with the xml file for the active sync i'll try more tomorrow....
does anyone know where I can locate facebook credentials inside registry.... not facebook the app but the sense integration...
and also where can i find the registry for
alarms
removing weather cities
removing timezone cities
setting regional setting to a specific country
thanks
Hello,
after updating to a newer rom we all face the boring and long process of set up as it was 'before'.
I am currently using the Energy rom (with co0kie). Sashimi does pretty much of a job for me. I also use 'cht editor' and 'settings export' tools which do even more. However I still have to set the following manually each time:
-disable tactile feedback SOLVED
-font size (set to the second from left, so a bit bigger than the smallest) SOLVED
-disable all data communication (now im using 'data controller' tool, but there must be a reg key for this) CANNOT BE DONE VIA REG KEY
-24hr format SOLVED
-enable agps
-sms threading set to classic (not threaded, as it is per default)
-stocks to be automatically downloaded and downloaded when in roaming
If anyone knows which registry settings deal with the above i would be obliged if you could share the knowledge.
Thanks!
24 hour format
HKEY_LOCAL_MACHINE\nls\overrides
DWord with name ITime set to 1
If you want to force two digits for teh hour (so 1 am would be 01:00 and not 1:00) create a string value in teh same key called STFmt and set it to 'HH:mm:ss'
--------------------
Vibration
HKLM/Software/OEM/TFLOSettings DWord ApVibrationOn set to 0
----------------
system font size
HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI
DWord CurFont
1300 largest on slider
1200
1050
900
720 smallest on slider
in that key is also a text key with name FontArray with value 720,900,1050,1200,1300
Possibly edit that to give different sizes?
----------------------
Energy ROM
Tools -> Settings Exporter -> Export All (save the file to your SD Card)
Flash/Hard Reset
Tools -> Setting Exporter -> Import All
-----
I believe I have XDA UC automatically importing the exported settings upon hard reset but I'm not sure and not near my phone or paperwork to say.
Elcs said:
Energy ROM
Tools -> Settings Exporter -> Export All (save the file to your SD Card)
Flash/Hard Reset
Tools -> Setting Exporter -> Import All
-----
I believe I have XDA UC automatically importing the exported settings upon hard reset but I'm not sure and not near my phone or paperwork to say.
Click to expand...
Click to collapse
Hmmm, only a half-true... you are correct that most of the settings is exported. However the ones I posted above are not... hence my original query.
nivepl said:
-disable all data communication (now im using 'data controller' tool, but there must be a reg key for this)
Click to expand...
Click to collapse
i *dont think* this is possible (i spent a lot of time in the past trying to set mine to always on and failed!)
Reg key - HKLM\comm\ConnMgr\Providers\{GUID}\|gprs connection name|\AlwaysOn = 1
was what i was trying to set, but the GUID changes every hard reset, so it i could never get it to work through UC. In the end i just have a small list of manual changes (via BsB tweaks or Advanced config) to set after a hard reset.
Sorry its not the answer you wanted, but might save you a lot of time going in circles!