Software request.... vibrating PAD - 8125, K-JAM, P4300, MDA Vario General

I'm looking for a software that add to the phone pad the capability to vibrate when a number is dialed.
I've had a MotoA1000 that have this feature and i think that it's
Wonderfull.
Sometime you think yo have dialed but not.
Thanks

Here it is
OOPS, did not see it was for the wizard... don't know if this works with wm5, guess you can just give it a try

Hi...
if tomvdz's software didn't work,then do it by urself :wink:
Using a registry editor,goto HKEY_CURRENT_USER\ControlPanel\Sounds,ull find Dtmf(x),where x is a number from 0 to 9,edit each one of them by doing the following:
:arrow: rename the DWORD Value "Sound" to "Sound1"
:arrow: create a new String Value and name it Sound,and put *vibrate* as string(note that the asterix arround vibrate is a must...
:arrow: do the same to the other Dtmfs(u have to redo it 10 times)
:arrow: note that if u want the "#" and "*" in ur phone keypads to vibrate,u have to do the same procedure to Dtmf# and Dtmf*
Cheers....
RAGO :lol:

They doesn't work both!
any other ideas?

RAGOv said:
Hi...
if tomvdz's software didn't work,then do it by urself :wink:
Using a registry editor,goto HKEY_CURRENT_USER\ControlPanel\Sounds,ull find Dtmf(x),where x is a number from 0 to 9,edit each one of them by doing the following:
:arrow: rename the DWORD Value "Sound" to "Sound1"
:arrow: create a new String Value and name it Sound,and put *vibrate* as string(note that the asterix arround vibrate is a must...
:arrow: do the same to the other Dtmfs(u have to redo it 10 times)
:arrow: note that if u want the "#" and "*" in ur phone keypads to vibrate,u have to do the same procedure to Dtmf# and Dtmf*
Cheers....
RAGO :lol:
Click to expand...
Click to collapse
This didn't work for me either.

what is this good for?

hmm, that's odd, on my Vario it worked! I think the posted file contains two cabs. The vibrate one gives you key virabtion, the keysound cab gives you the sounds back if you decide that you don;t want vibration...Don't use both, because the last one you use overwrites the first one. So if you want vibration, than only install vibrate.cab! To go back to keysounds, use the keysound cab again.

It finally worked. The catch was that apparently I had turned off keyboard souds in the Options menu of the Phone application. I toggled that back on and it worked. I didn't realize that the vibration was also controlled by that option.

Oops, sorry, forgot to mention that. I had the same problem when I installed it on my Magician half a year ago. It uses the same reg keys as for the sounds, so if the keyboard sounds are off in the options it also shuts down the vibrations.

By the way, now that they keypad sound is toggled on, the phone vibrates not only on number presses but also call begin and end. Is there a way to toggle that part off, but still keep the number dialing vibration?

I've heard about a program that vibrates when the person you are calling picks up, so you can hold your ppc in the hand while calling and waiting to vibrate then hold it to the ear.
anyone knows about that software? For the symbian platform its called FreeCallSprite Dial-up vibration software.

I have it just need to search on my vault!!!
Lol ok click on my htc SKYdrive IMAGE in my signature it tooks you to my public folder with my cabs there is one download it it works on my old wizard. or download the TrukQteka exe it has many tricks and allows you to set vibrate pad. is called "phone_pad_vibrate.cab" and set short tones on phone setting please.
I dont heard about that app? but for symbian? not for PPC WINMO!

Related

Short vibrate on button press in intelidialer

Hello all.
I think it will be useful to get short vibrate on each button press in intelidialer to make it sure that button really pressed. May be somebody can write small program to do it? I know that there are several replacements of intelidialer that have such function, but they do much more and are big in size. Thanx in advance.
It will be great. :!: I think that it is possible to realise it by regisrty editing. Does anybody has an idea?
Yes, this will be great! :lol:
Plz Help :?
Anyone have tried motorola a1000? it have this feature...
(this is the only pros of device :shock: )
Yes i need something like that too, because when i press the touchscreen with my finger doesen't press every time, so a short vibrate to indicate that it is pressed will be gold.
I tried to find a solution but have no results yet. But I've made a registry tweak for the keys sounds like loud "one", "two", "three" etc. If anybody intrested in it I can make a cab a little bit later.
for me it sounds good, it's a good start, first we have tones and then someone can ad vibrate, it's better then nothing.
we are waiting for a .cab with digit sounds.
thnx.
I found somewhere a free dialer that claims to vibrate on every button touch but i don't want to use other dialer. If someone it's intereseted i think i can upload it or give a direct link, just tell me.
give us a link.
maybe it will be useful
Here is the link: http://www.pocketgamer.org/d9/
Maybe someone can make a seperate program just for the vibration, from the source code? :?
This program do the job for only 10 $
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
Direct link to the program
http://www.imaginet-software.net/downloads/fingerclixiiar90.exe
I find the way!!!!!!!!!!!
for i = 0 to 9
Give an example for "i" Button:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf "i"]
1. Rename Standart DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
next i
Hi StronG01,
Thanks for that. Its works like a charm. You are gr8.
Cheers,
Vishal
Thanks!
I can't make it work.. . I renamed the old "Sound" to "Sound1" , i Add a value string named "Sound" and then it ask about "Contents for <Sound>" and if i write there "vibrate" nothing happens. What i am doing wrong?
Its ok, I finally did it. The value that must be written when ask "Contents for <Sound>" it is "*vibrate*" not only vibrate, but with the asterisks too.., thax a lot, it's great.
Excellent find, dude,.
Thanks :wink:

AWESOME: Vibrate feedback on phone key press

faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
This is great, thank you. I used to use Redial with vibrating effect on my PDA2k (WM2003SE) but this is even better
don't expect a long battery life with that! :wink:
acer175 said:
don't expect a long battery life with that! :wink:
Click to expand...
Click to collapse
Are you kidding me? I mean what kind of a battery effect you think it will have? Its such a small vibe that I don't expect to have ANY noticable effect on battery life. First it vibes only when you dial phone numbers (how many a day? 5? 6? even 20? Its still nothing. Second, receiving a phone call, that is the vibration during it, probably uses more power than this addition will use in 20 calls...
I really disagree... :wink:
This is a great little program!
I don't like it because if you tap fast, it wont vibrate. In addition to this, there is a serious problem with the dialer after you uninstall it.
So I had to reinstall it and now i'm stuck with it
My rating : 0 (ZERO)
@Andrew_sh: use the attached cab to get the keytones back, then uncheck from the sounds and notifications settings to get a working silent dialer back.
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Sorry to hear it didn't work Andrew, I have no idea how to fix this. I use the vibrate and am happy with it, on my Magician going back with this cab worked fine, I have no idea what is causing this in your Prophet. I hope you can figure it out and correct it, good luck with that.
andrew_sh said:
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Click to expand...
Click to collapse
Try this, it's a saved registry string of the original keys that the .cab modified. Hopefully i'll work for you without messing up anything else.
I had to rename the file vibrate off.reg.exe to ba able to attach it. Just delete the .exe part ie. vibrate off.reg
this is a technical forum
can someone paste here the registry keys which are being modified by this vibrate utility?
thanks
Using a registry editor navigate to the following keys and follow the directions. Do this for each of the listed registy keys
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf9
this mod doesn't work fine for me, I noticed the vibrate a few time but it's not working everytime I tap on the Keypad...
Strange :?
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
its true if you tap fast it wont vibrate at all.. very annoying. is there a way to make it vibrate for a set lenght.. much like the dtmf tones used to be.. no matter how long or short i press..
that would be very useful.
regards,
tom
bk227865 said:
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
Click to expand...
Click to collapse
I used this mod until I found out that I couldn't turn off vibrate on incoming calls anymore. I can't be sure that they are related, but the timing was right. The next time I did a ROM upgrade I didn't install it again. I use speed dial with Photo Contacts Pro anyway.
krale said:
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
Click to expand...
Click to collapse
Never mind - problem fixed
Not installing on Tytn / Black2.5
"Installation unsuccesfull, Not meant for this device"
Did anybody have more luck? How?
I don't like this
...the vibrate just doesn't trigger some of the time, which means you can't rely on tactile feedback on dialling, which makes it fairly useless. Sorry...
buhahahaha
*buzz* *buzz* *buzz*
works fine on my Jamin. Great app

Phone ring delay

Hey,
I would like to upgrade to the TyTN but I need to known if the is any issue with the phone like it was on the Universal.
When someone calls you does the TyTN ring straight aswait or does it start ringing after3 or 4 ring like it did on the universal.
Is the screen aligment on the TyTN been sorted out?
Is they any major problem with the device?
Well it run TomTom Navigator 6?
Cheers for any input.
Thanks
Gigino
gigino said:
Hey,
I would like to upgrade to the TyTN but I need to known if the is any issue with the phone like it was on the Universal.
When someone calls you does the TyTN ring straight aswait or does it start ringing after3 or 4 ring like it did on the universal.
Is the screen aligment on the TyTN been sorted out?
Is they any major problem with the device?
Well it run TomTom Navigator 6?
Cheers for any input.
Thanks
Gigino
Click to expand...
Click to collapse
I have found that there is a ring delay of 1 ring on my Tytn (Vario II). I too had the Universal on trial with VodaUK and the delay was excessive.
The screen alignment issue is only a problem for me if the phone get excessively hot (such as the time I left it near my laptop fan) other than that is works reasonably well.
I have tried TT 5.10 and it ran well.
Smads
there is an option in Tweak2k2 program is "Disbles 3s delay in Ringtone", i didn't try it yet, please test
sorry about my english
i have the tweaks2k2 program installed and the 3s delay is ticked......but when someone calls me there is still a delay of one ring only and then the phone wakes up on the second ring........
and yes tom tom 6 will definitely work.....
[HKCU\Sounds\RingTone0]
Script = "apw0r"
Default settings = "apw3r"
sykt said:
[HKCU\Sounds\RingTone0]
Script = "apw0r"
Default settings = "apw3r"
Click to expand...
Click to collapse
Should be HKCU\Control Panel\Sounds\RingTone0
My default setting is actually "av0pw3r"??? I don't know what this means, so I've just left it alone!!!
the_matho said:
My default setting is actually "av0pw3r"??? I don't know what this means, so I've just left it alone!!!
Click to expand...
Click to collapse
I think the value varies depending on the settings you have for ring tone, I have "vibrate and then ring" and my default value was "v3w3apw3r". I've been plying with the values and ringing myself after each change, this is my conclusion:
The first '3' specifies the vibrating time before the phone rings, the second '3' specifies the delay after the phone stops vibrating and the ringtone starts playing and the third '3' specifies the delay between repeated ringtones. Correct me if I am wrong
errr.... forget my previous comment, I was wrong but Google told me the truth:
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
Click to expand...
Click to collapse
So according to the data given,
The phone activates and rings. There is no delay between.
...yet there is a decent amount of delay before the device rings on this end.
I don't have tweaks2k2 but it seems it doesn't do any better anyway...
See this thread http://forum.xda-developers.com/showthread.php?t=258109
I want to get rid of the delay, but I'd like to be able to use PhoneAlarm and they probably aren't compatible.
vua777 said:
there is an option in Tweak2k2 program is "Disbles 3s delay in Ringtone", i didn't try it yet, please test
sorry about my english
Click to expand...
Click to collapse
This fixes this problem. The ring delay is a common problem regarding the power/wake up status of the phone. The fix corrects it.
Download tweaks2k2 from www.tweaks2k2.com, and you will have an evaluation copy which will work for three goes. I recommend you purchase if you're happy with it, it's a great tool, and so many uses! The writer should be rewarded.
Regards
where is this app on the url you have provided? I just get a load of ads...
thanks
The url is actually http://www.tweaks2k2.com
EDIT: I can also confirm that this does work.
Looks like it's just a simple reg hack
athiqueahmed said:
The url is actually http://www.tweaks2k2.com
EDIT: I can also confirm that this does work.
Looks like it's just a simple reg hack
Click to expand...
Click to collapse
Opps, sorry, that's the URL I meant :-/... edited previous post
Every time I reset my device the script is back to apw3r for ringtone0.
anyone expierence the same?

Vibrating keys

Hey all I wanted to know if there is a program that will make my Wing vibrate slightly when I dial so I know I pressed the keys. I found this:
http://forum.xda-developers.com/showthread.php?t=269024
but is doesn't work on my wing. Any thoughts out there?
Doesn't works for my LG KS20 too, is there any software to do the same job for vibrating on key pressing like the LG Viewty?
did you set the keypad tone to short under phone settings?
I cannot install it... error message.
I adjusted the reg, its faster and simpler. Did you try that?
MM
MaxMotus said:
I adjusted the reg, its faster and simpler. Did you try that?
MM
Click to expand...
Click to collapse
why don't you just share with him the registry edit then? goodness...
Vibsrating Keys Cab
Here u go ..... just made a cab for it
Its lso included in one of my WM6 Roms
Thanks for the cab, i'm going to try it on my wm6 device.
i see 7 downloads..but no feedback yat..
feedback...;-)
thanks for the cab..i installed it on my tytn 2 and it works fine. there is one flaw (and i am almost sure it has nothing to do with what you did): you can press a key very lightly and produce a number without any vibration..i don't know if this can be prevented, but the problem is: you never have a 100% reliability that no vibe= no key pressed...
maybe its also related to ur touch screen pressures setting..
that sure makes sense...;-)
Have downloaded and used the vibrating keys cab on a 2003se BA. Great. No problems, and thanks!
cab only works intermittantly on a hermes/tytn/8525 device. uninstalled, and no longer get dtmf tones. dtmf is funtional, but i dont hear the tones when i press a number to dial. all i get is a singlr tone for most of the the keys, and another tone for a few of t e others. how do i restore the tones that were produced prior to this cab. Also, would someone share the reg edit that makes the phone vibe on digit press.
Works on Eten M700
Works great on my Eten Glofiish M700 with WM6
you have to make sure that under phone options, its set to short or long tones..if its set to off, you will not ave anything
Thanks for the great CAB
feedback KS20
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
thorsten06 said:
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
Click to expand...
Click to collapse
as u may have read on the previous post that its related to ur touch sensivity settings
Here is the Cab that will turnoff the vibrating key pad :
Installed on my htc p360 and it works fine
Thank you, , now , i'm sure to be alerted by any touching pad , as if the phone is in my pocket, and unlock .. ..
please help me.
im new with wm6.
i have a ks20 and dont know how to install this.

Disable New SMS Auto Wake Up and Turn On Screen?

Hi,
I've owned the Xperia for a week and it's a great WinMo device. However unlike Touch Pro or Diamond, there's no registry tweak available to turn off the auto wake up on new sms feature.
I found it really annoying. Everytime a new SMS arrived when the phone was in my pocket the screen automatically turned on, and as I was walking my jeans' pocket continuously "touched" on the phone screen and accidentally opened bunches of programs and scroll up and down until it hanged.
It will be perfect to just make sound + vibrate, but keep the screen off, as I could do on Touch Pro.
Anyone knows of such a solution please do help!
I need to bump on that...
hmmmmmmmmmmmmmm
aint advanced config 3.3 working for that?
I was having this problem too... the only thing I changed to attempt to fix this was instead of pressing the power button to sleep the phone before I put it into my pocket, I press and hold the end key so that it locks the phone and dims the screen. The screen eventually turns off and it requires you to unlock the phone when you power it back on. When you receive an SMS or Email, the screen still lights up, but you have to press unlock, then tap unlock to start using it.
Yes, I have the same problem too and hope we can have the option to turn it off so that the screen will not lighted up when there is new sms or call.
Can someone work on this?
The registry key used for the tweak that works on Touch Pro does not exist, which is HKLM\Drivers\BuiltIn\RIL
smaberg said:
aint advanced config 3.3 working for that?
Click to expand...
Click to collapse
That option is for Touch Diamond and Touch Pro only, and it does not show on Xperia when you use Advanced Config. It's obviously related to the registry key mentioned above.
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Has anyone tried this out to see if it works...???
Cheers
SE-Naz said:
Has anyone tried this out to see if it works...???
Cheers
Click to expand...
Click to collapse
I have tried it myself and it works, I don't have to worry that I might press anything on the screen when there is incoming SMS.
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
SE-Naz said:
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
Click to expand...
Click to collapse
Not sure about yours but I do not have this key so I have to create a new one and it is working.
I need to create it...
Does it need to be where the
HKCR
HKCU
HKLM
are???
Cheers
Sorted now and working well...
Thanks again
Put it in HKLM.
However Resco registry give me an error and doesn't create this dword. Very very strange...
chongbh said:
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Click to expand...
Click to collapse
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Just added this feature in my application XperiaTweak!
hutch said:
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Click to expand...
Click to collapse
Using your Registry Explorer an go to the below location :
Location in Registry : HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Select "New" D_Word and you will be asked to enter the details :
Top portion just enter : DisableSMSWakeUpEvent
and bottom portion just enter the value : 1
Save it and you should find the details there :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
For easier way, you can download the latest Xperia Tweak and it include the option to turn off the screen for any incoming sms.
http://forum.xda-developers.com/showthread.php?t=440035
Confirmed Work!
I can confirm this solution works perfectly! I thought if the value does not exist means the device does not support it. Thanks chongbh!

Categories

Resources