I bought the JASJAR from Axiom, Dubai. I noticed overheating of the device during phone calls and a distinct color change and a crack in the TFT screen. Anybody experience such problem. Now the CDL is not responding to my call for repair. Thanks
KAVYA
[email protected]
Related
Hi all,
I have an imate and somehow the screen has been damaged - not sure how it happened, i went to answer a call today and noticed it was backlit but looked like some funky screensaver, then realised the screen looks like its been smashed - you know how LCD's smash... any ideas on costs to get this fixed or if Imate will repair underwarrenty?
Warranty will not cover this situation.
I can offer you replacement screen for XDAII. please PM me.
Typical as typical can be, my k-jam which was registered on I-Mates site on 5th October 2005 (so out of warranty by 11 days! )
Basically the problem has been is that any pressure to the bottom left/right side of the screen causes the display to go mental. soon after this i've noticed the touch screen becoming less and less responsive, and am now at a point where to get touch screen to work i have to apply pressure to the bottom left area just under the screen. or open the slide out, which seems to apply some pressure which is apparently needed.
Is there anything i can do myself to sort this? any advice in general?
i'm awaiting to hear back from the UK service center, but i-mate have told me that it is entirely at the descretion of the service center wether they would do an out of warranty repair or not. nothing imate could/would do. which is hard to beleive and also dissapointing.
kinda wished i got a qtek now
bump anyone?
I had this and it was just a bit of grit stuck under the bezel stopping the screen from functioning properly and it was randomly selecting things.
Dave
I replaced a broken LCD from where I had dropped my Cingular 8525. Everything appeared to go fine, however when I cut it on the screen is solid white. The phone is beeping letting me know I have text messages and making other normal operating noises. Any ideas what it could be, did I miss something during the install or could something besides the LCD have been damaged when I dropped the phone. This time it only fell 8 to 10 inches. Any help would be appreciated.
Thanks in advance,
Stephen
[email protected]
Hi,
I accidentally broken the touch screen of my trinity. I send it to the official repair center in my country, (arvato Teleservice – Porto, Portugal).
What leads me to write this topic was the comparison I made with my repaired trinity and another original trinity.
The brightness of the replaced TFT is more yellowish, is not the same pure white that we are accustomed in our trinity.
Now I am in doubt whether I was faked with a not original piece, or if I make more damage when I broke the touch screen.
I also note in the vertical edge of the TFT, is visible a light coming from inside the trinity.
Someone who has replaced the TFT found this problem already?
Sorry my bad English.
Hello everybody!
I saw an auction with a Toch dual, "broken display". I thought to buy it, and switch the LCD with a new one. I paid the touch just 30$ (20 Euros).
But the situation was a bit different: the device is fall into the water (i see the pink marks on the device and the battery), the display was actually ok but has problem with the backlight.
The backlit was veeeery soft, didn't react if i tried to set it manually on higher levels, and was a bit stronger if i open the slide of the cell phone.
I thought, it could be a problem of humidity, and if i dismounted and dried the electronics, it would disappear, as it was with my xperia x1: felt into the water, some humidity inside was causing the backlight to flash and disappear, once dried everything got normally.
So I tried, but actually the situation now is even worse: the digitizer does not respond at all, and no changes in the light.
So my question is: can i just buy on ebay a new LCD + digitizer, and solve all the problems? I already changed a LCD without digitizer on a cell phone, and it worked. I don't know, how hard and risky can be to change also the digitizer, and also i cannot imagine how to fix the backlight problem, just suppose that with the new LCD it will work - it is integrated, isn't it?
Many many thanks for your help!!!