Hi to all,
I have a very strange problem with the connection with activesync.
When i got the Qtek 2020, i was able to syncronise on the USB cradle easily.
After some time i decided to connect via bluetooth.
No problems there!
Activesync is working excellent via bluetooth!
But..
Now i cannot connect via USB !!!!!
I tried a fresh install on another PC of activesync (even the new version from MS), but nothing! The activesync icon is always grey! it cannot connect.
Windows find the USB cradle and the PPC OK, but nothing more.
The cradle and the PPC port must be working because i see that the battery is charging when i have it cradled.
In the PPC settings options--options i have the USB selected.
Any ideas??
TIA
try running
\windows\repllig.exe
and then put the device in the cradle
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
Thank you for your answer,
u mean the repllog.exe file?
I will try that ok!
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
I run repllog.exe couple of times on the cradle and it Worked !!!!!!!!!!!
Thank you very much!!!
lads
i have had a similar problem and was pointed towards this topic.im excited that i will be able to use all the functions fo the phone again.
i just dont know how to run this exe.where is it and how do i run it and what happens when i run it
cheers in advance
zag
still looking for help set this up,
how do i run it please
rob
this forum is fairly disappointing , i was told advise was easy to get.
is there any one who will help me sync my xda please
rob
If you look at Rudegears reply you will see that the file is in the windows directory.
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
I had a similar problem. the answer:
Re-install activesync 4 WITHOUT the cradle or usb cable attached to the computer. plug it all in after the installation.
hope that helps.
Darrell said:
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
Click to expand...
Click to collapse
I also have this kind of problem ... anyone can help ??? I want to install activesync 3.8 since I encountered internet pass through problem. TIA.
cruisin-thru said:
If you look at Rudegears reply you will see that the file is in the windows directory.
Click to expand...
Click to collapse
It's not in my Windows folder!
I'm running Windows XP SP2
Activesync 3.8 is very slow... It actually stops responding whenever I dock my device - then starts working after a few minutes!
I thought this might fix my problem, but I can't find the executable anywhere!!!
Help! today i was playing with my uni today and for some reason now active sync wont syncronize everytime i connect on the device it says connected and it gives me this error
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
and it is connected with the Guest account afterwards, it was working about 30min ago...
i think hat caused it is i accidently deleted a folder in application data called MDM or MDA or sth i cant remember would that have caused the problem? anyone go a backup of that file? maybe i can get a copy of? or anyone know the cause of the prob? i've turned off my firewall and everything just incase i thought it would intervene with active sync but still no luck
also i can install ay app it keep saying Installation of "the app.cab" was unsuccessful.
thanks in advance
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
so out of the blue I am getting this error again when I try and sync my Niki. I am running Vista Ultimte 32 bit and I have tried unchecking the usb network function under connections, I have deleted the association on both my PC and my phone. I have uninstalled the drivers and reinstalled them and I am still getting this error message. Oh yeah I have also shutoff my Bitdefender AV and Firewall and tried to sync, no dice. Please help!
For Vista you must use this one http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
With the main PC all works as it is suposted (Vista). The laptop also Vista does not recognize the X1 to make a partnership. The X1 is connected as visible in explorer. What can be done that a partnership can be setup (the second one) Please advise, and thanks for any assistance.
(almost) the same problem
Hello,
I'm having almost the same problem.
Last friday I flashed my ROM from T-mobile Dutch branded to unbranded SonyEricsson R2A Dutch ROM. After that I set up a partnership with a laptop, no problem.
But now I can't set up any partnership with WMDC anymore on my Vista Ultimate SP1 computer. I keep getting a warning 'problem with connection, please reconnect your device and try again'.
I tried everything (like hard reset, reinstalling WMDC, checking Windows services needed for sync etc...).
Thanks in advance for any help!!
Same problem here!
Yesterday I updated ROM to R2.... and at first i have seen no problems!! But then i noticed that i can't connect my X1 to my notebook (Vista OS)!!
I checked the configurations, they were ok on X1! Windows Mobile Device Center won't recognize the device.... and I'm !
I and many others, would appreciate some little help with this!!!
Thank you!!!
((ooo, i tried reinstalling WMDC, but I had no positive results!!))
Goto Settings > Connections > USB to PC and uncheck Enable faster data synchronization