Awe Yeah!! I am now able to activate Microsoft Voice Command 1.5 via a Bluetooth headset on the imate KJAM! I press the talk button on my Bluespoon AX2, audio transfers to the headset, Voice Command starts, I say something... Voice command does it, and I can hear it in the headset. Press the talk button again and the audio is transferred back to the device. If I press it once to initiate Voice Command that makes a call, I have to press the talk button once to end the call and again to end the audio gateway.
Here's how you do it:
In the Windows folder there's a file called sddialer.exe. This is the Voice Tags program currently activated by a Bluetooth button press. All you do is copy voicecmd.exe to a temporary folder, rename it to sddialer.exe and copy it to the Windows folder overwritting the original. You might want to back-up the original sddialer.exe just in case.
After there, all is well and Voice Command functions as above!
WOo Hoo!!!
UPDATE: An easier way is to use a registry editor and go to:
HKEY_LOCAL_MACHINE/Software/OEM/VoiceCommand/
..Then change the path value to:
\Program Files\Voice Command\voicecmd.exe
If you don't want to waste space, you can also change the registry to point to the voicecmd.exe instead of the sddialer.exe.
Will this be possible on the blue angel running wm5??
BeyondtheTech said:
If you don't want to waste space, you can also change the registry to point to the voicecmd.exe instead of the sddialer.exe.
Click to expand...
Click to collapse
Ah, did you find the registry entry for that? I bet some one could make a quick program that changes that to launch anything the user chooses.
Nevermind, here it is: HKEY_LOCAL_MACHINE/Software/OEM/VoiceCommand/
..Just change the path value to:
\Program Files\VoiceCommand\voicecmd.exe
fusedwire said:
Will this be possible on the blue angel running wm5??
Click to expand...
Click to collapse
Already been done http://forum.xda-developers.com/viewtopic.php?t=28033
what about XDA IIi ?
can MS Voice Command 1.5 work with IIi ?
efjay said:
fusedwire said:
Will this be possible on the blue angel running wm5??
Click to expand...
Click to collapse
Already been done http://forum.xda-developers.com/viewtopic.php?t=28033
Click to expand...
Click to collapse
Thanks... Works perfectly. I know it wasnt possible in the wm2003se, but can we get the audio to route throught the headset?? The K-Jam can do it.
Bluetooth voice dialling only works with the MS bt stack at the moment, not the Widcomm stack on the IIi and BA running WM2003SE
Looks like bluetooth voice dialing doesn't wake up a WM5 device either.
adamz said:
Looks like bluetooth voice dialing doesn't wake up a WM5 device either.
Click to expand...
Click to collapse
I dont knw what I have done, but my bluetooth doesnt disconnect when I press the power button. Using buzz's patch(installed first), pocket zen phone beta (installed second) and the voice dialler cab provided (installed third, using with sddialer).
Can someone confirm this??
Did anyone try this? Dunno if it would help...
mixmaven said:
From my list of JAM tweaks, don't know if they fixed this but I always ended up changing this setting on my JAM to make sure my bluetooth was alive during a conversation. If you ever have trouble with bt timing out, try:
HKey_Current_User\Control Panel\Phone
Change the Sleep key from a 1 to 0.
As always, have a backup.
-mix
Click to expand...
Click to collapse
fusedwire said:
adamz said:
Looks like bluetooth voice dialing doesn't wake up a WM5 device either.
Click to expand...
Click to collapse
I dont knw what I have done, but my bluetooth doesnt disconnect when I press the power button. Using buzz's patch(installed first), pocket zen phone beta (installed second) and the voice dialler cab provided (installed third, using with sddialer).
Can someone confirm this??
Click to expand...
Click to collapse
Sorry, false alarm!!! It stayed alive coz pocket zen phone changed from one profile to another
fusedwire said:
fusedwire said:
adamz said:
Looks like bluetooth voice dialing doesn't wake up a WM5 device either.
Click to expand...
Click to collapse
I dont knw what I have done, but my bluetooth doesnt disconnect when I press the power button. Using buzz's patch(installed first), pocket zen phone beta (installed second) and the voice dialler cab provided (installed third, using with sddialer).
Can someone confirm this??
Click to expand...
Click to collapse
Sorry, false alarm!!! It stayed alive coz pocket zen phone changed from one profile to another
Click to expand...
Click to collapse
What setting did you have for bluetooth in PZP? Did you have the BT set to connectable or activate on call? Try setting it as connectable and see if that keeps BT up.
Not to go OT, but is "bluetooth audio" still NOT possible with the K-Jam/MS stack? (I listen to podcast/talk - so thru a BT headset is all I want/need) I would pay good money to somehow replace the current stack w/Broadcomm stack I had on my HP unit THREE YEARS AGO! Other work arounds out there? Thanks!
CDTV said:
Not to go OT, but is "bluetooth audio" still NOT possible with the K-Jam/MS stack? (I listen to podcast/talk - so thru a BT headset is all I want/need) I would pay good money to somehow replace the current stack w/Broadcomm stack I had on my HP unit THREE YEARS AGO! Other work arounds out there? Thanks!
Click to expand...
Click to collapse
Yes, pressing the voice dialing button on a Bluetooth headset opens an audio gateway and launches the application specified in the registry. If the application specified does not automatically close the audio gateway (Voice Speed dial does, MS Voice Command does not), then the audio gateway remains open and you can hear whatever your Pocket PC is playing through the Bluetooth Headset. Pressing the voice dial button on the Bluetooth headset again in this case closes the audio gateway and transfers audio back to the Pocket PC.
Ya, I hear for a second but then the voice command closes again _ I can't keep it open - can you? How?
i am not abble to overwritting the original ssdialer.exe it says it is in use.
CDTV said:
Ya, I hear for a second but then the voice command closes again _ I can't keep it open - can you? How?
Click to expand...
Click to collapse
Yes, after MS Voice Command closes, the audio gateway remains open until I press the bluetooth voice dial button again.
adamz said:
CDTV said:
Ya, I hear for a second but then the voice command closes again _ I can't keep it open - can you? How?
Click to expand...
Click to collapse
Yes, after MS Voice Command closes, the audio gateway remains open until I press the bluetooth voice dial button again.
Click to expand...
Click to collapse
I just tried to do what you said with my old JAM & it didn't work is that because it's ppc '03? I'm a nervous-nelly when it comes to replacing ROM in these devices, but I do it for the BT audio...soooo question is : how safe/risky is replacing the VSD with VC?
CDTV said:
I just tried to do what you said with my old JAM & it didn't work is that because it's ppc '03? I'm a nervous-nelly when it comes to replacing ROM in these devices, but I do it for the BT audio...soooo question is : how safe/risky is replacing the VSD with VC?
Click to expand...
Click to collapse
Yes, it doesn't work on the old JAM. I've never had problems editing the registry, but if you do happen to screw things up, you can usually just change the registry back. If worse comes to worse, you can do a hard reset.
Related
Hi,
Where can I get the voice command from??
is it free???
Thanks
cifp48 said:
Hi,
Where can I get the voice command from??
is it free???
Thanks
Click to expand...
Click to collapse
You can get it online from e.g. Handango.
No, it isn't free.
http://www.microsoft.com/windowsmobile/downloads/voicecommand/default.mspx
can someone explain what exactly this program does?
can someone explain what exactly this program does? How is it different from me holding down the button that prompts me to say the contact name and then makes the call.....does this program do more? please fill me in. Thankx
can someone explain what exactly this program does?
can someone explain what exactly this program does? How is it different from me holding down the button that prompts me to say the contact name and then makes the call.....does this program do more? please fill me in. Thankx
Here
http://www.microsoft.com/windowsmobile/downloads/voicecommand/default.mspx :lol:
what does voice command do
There is one major difference between voice dial and voice command.
Voice dial requires you to record your voice saying a keyname attached to a contact entry. The memory on the phone restricts how many of these sound files you can have recorded.
With voice command teh software 'reads' every entry in your phone and translates it. It also reads your voice saying the name and matches it to the contact. Much more vrsatile. I bought mine for about £25 - best thing to add to the phone.
Also VC allows you to ask several pertinent questions to the phone:
What appointiments sdo I have tomorrow?
What is my next appointment?
What is the date?
What is the battery level?
It also announces calls as they come in - your phone says - 'Incoming call from Steven Williams'
amazing software - you wont look back one you have this - great for the car and great for showing off the phone to the office!
Re: what does voice command do
pies said:
amazing software - you wont look back one you have this - great for the car and great for showing off the phone to the office!
Click to expand...
Click to collapse
I know the MS site says "requires 7 megabytes (MB) of device memory for 500 contacts and 100 songs.", but how much storage memory does it actually use, and does it eat much program memory?
Thanks got it!
BTW, how can I get it to ring in my Bluetooth headset too? I have a Nokia 26W, when the phone rings I can't hear the voice on the headset, only the phone, and also how do I program the voice dial button on the headset.
Thanks appreciate everones input.
cifp48 said:
Thanks got it!
BTW, how can I get it to ring in my Bluetooth headset too? I have a Nokia 26W, when the phone rings I can't hear the voice on the headset, only the phone, and also how do I program the voice dial button on the headset.
Thanks appreciate everones input.
Click to expand...
Click to collapse
I think you need to make some registry changes:
http://forum.xda-developers.com/vie...light=enable+bluetooth+recieve+receive#279789
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
and
http://forum.xda-developers.com/viewtopic.php?p=176193#176193
simon_darley said:
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
Click to expand...
Click to collapse
Thanks, will try it out
I was getting very frustrated trying to get this 40.00 program to work with my Tekkeon ET3000. Then I noticed one thing. In the HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path, where you change the default value to \Program Files\Voice Command\VoiceCMD.exe, I forgot to put a space between Voice and Command. Put the space in there and it works like a champ. Still not sure its worth 40.00, but I am liking it alot more right now.
OK, I thought I had this working, but obviously I wasn't paying attention, and it's not
I have the Cyberon Voice Dial app installed, and that works when I press the button on my headset, but I would like it to use the Micrsoft Voice Command 1.6 instead.
I have tried changing the following key, but it does nothing.
From: HKLM\Software\OEM\VoiceCommand\Path=\Windows\SDDialler.exe
To: HKLM\Software\OEM\VoiceCommand\Path=\Windows\VoiceCmd.exe
This registry change was all I could find any info on. I'm guessing something else needs to be done though
Any ideas?
TIA
AlanJC said:
OK, I thought I had this working, but obviously I wasn't paying attention, and it's not
I have the Cyberon Voice Dial app installed, and that works when I press the button on my headset, but I would like it to use the Micrsoft Voice Command 1.6 instead.
I have tried changing the following key, but it does nothing.
From: HKLM\Software\OEM\VoiceCommand\Path=\Windows\SDDialler.exe
To: HKLM\Software\OEM\VoiceCommand\Path=\Windows\VoiceCmd.exe
This registry change was all I could find any info on. I'm guessing something else needs to be done though
Any ideas?
TIA
Click to expand...
Click to collapse
I'm running Helmi's AKU3.5 at the moment.
I just bought VC1.6 UK and installed. Works off my BT head set no problem.
I just wish I could understande her!!
Regs
Mav
I think you would need to disable the voice dial in cyberon or if you can't, uninstall it.
mavrik64: there is a reg hack to slow her down
r3bel said:
I think you would need to disable the voice dial in cyberon or if you can't, uninstall it.
mavrik64: there is a reg hack to slow her down
Click to expand...
Click to collapse
Yes, thanks.
I tried, doesn't seem to slow her down enough though.
Do you mean the one here: http://forum.xda-developers.com/showthread.php?t=286457
Or is there something I've missed
Cheers
Mav
I can't uninstall it as it's in the ROM.
Apparently I need to change that registry key, but it hasn't helped. Am just trying to find out how to do it.
Bluetooth Voice Command
Check this link
1/2 way down page is the section on Bluetooth Voice Command
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Thanks, that's what I had already done as stated in my first post
Except for the path of voicecmd.exe because it was in Windows, not Program Files.
It didn't work.
OK reinstalled it after clearing out the Cyberon registry entries, and it's working now
I managed to activate Micrsoft Voice Command 1.6
when I press the button on my bluetooth headset
(midget_1990_v0_1_vanilla_wm6) by doing:
HKLM\Software\OEM\VoiceCommand\Path=\Windows\VoiceCmd.exe
HKLM\Software\OEM\VoiceCommand\VoiceCmdEnable=1
and deleting SDDaemon from \Windows\Startup
---------------------------------------
Best Regards, Vladimir
Hello All:
I can't seem to get the phone notifications (Phone Calls Only) to my headset. Email notifications, Activating Voice Command from headset works.
First 2 seconds of the phone call notifications comes to the headset but the rest comes from the Universal's mic.
Is there any workaround on this?
I'm using one of the many Crossbow ROMs.
In my wizard everything works the way it is supposed to be.
TIA
Bluetooth VoiceCommand
ku3vw said:
I managed to activate Micrsoft Voice Command 1.6
when I press the button on my bluetooth headset
(midget_1990_v0_1_vanilla_wm6) by doing:
HKLM\Software\OEM\VoiceCommand\Path=\Windows\VoiceCmd.exe
HKLM\Software\OEM\VoiceCommand\VoiceCmdEnable=1
and deleting SDDaemon from \Windows\Startup
---------------------------------------
Best Regards, Vladimir
Click to expand...
Click to collapse
Hello, i have underground rom WM6 and Voicecommand V1.6 pre-installed.
In windows the file is named Voice Command.exe instead of VoiceCmd.exe, i type this name in register as above.
But what do i have to add second, a Dword, string, or Bineaire?? And do i have to call this string/Dword VoiceCommandEnable=1 ??
Please help!
Sorry, already solved!!!! Thanx
Can this be done ? if so how
spacecat said:
Can this be done ? if so how
Click to expand...
Click to collapse
Search for btaudio.exe, a small program that can toggle all sound to your bluetooth on/off OR btIO, which gives a tray icon with a pop-up menu to set that and other BT options.
for me the best thing to do is change
hklm\software\oem\voicecommand\voiceCmdDuration = 99999
then to toggle this feature on and off change
same place\launchApEnable
1 for on and 0 for off
if its off then it will send audio to your headset
irus said:
for me the best thing to do is change
hklm\software\oem\voicecommand\voiceCmdDuration = 99999
then to toggle this feature on and off change
same place\launchApEnable
1 for on and 0 for off
if its off then it will send audio to your headset
Click to expand...
Click to collapse
does this mean i can use voice commander and play everything via my headset?
I tried a couple of apps but they stopped voice commander from working
tried it doesnt work, sound always plays through handset
spacecat said:
tried it doesnt work, sound always plays through handset
Click to expand...
Click to collapse
Did you try this?
victoradjei said:
Did you try this?
Click to expand...
Click to collapse
I have and it works but it turns off the voice commander
spacecat said:
I have and it works but it turns off the voice commander
Click to expand...
Click to collapse
Mine works fine without any conflicts with Voice Command 1.6.
ltxda said:
Mine works fine without any conflicts with Voice Command 1.6.
Click to expand...
Click to collapse
can you post your exact registry settings please
so i can make mines correct
it always just call up the speed voice dial
** Added links to btaudio and btio on the XDA wiki -- http://wiki.xda-developers.com/index.php?pagename=Athena_FAQs
ltxda said:
Mine works fine without any conflicts with Voice Command 1.6.
Click to expand...
Click to collapse
Well actually, Voice command will still work if you trigger it from your device and not the headset.
When BTAudio is enabled, all sounds go through the headset, but clicking on the multifunction button on the headset will not start Voice Command, you need to do it from the PDA.
When BTAudio is disabled, you can trigger Voice Command from both PDA and headset ...
BigDede said:
Well actually, Voice command will still work if you trigger it from your device and not the headset.
When BTAudio is enabled, all sounds go through the headset, but clicking on the multifunction button on the headset will not start Voice Command, you need to do it from the PDA.
When BTAudio is disabled, you can trigger Voice Command from both PDA and headset ...
Click to expand...
Click to collapse
Incorrect...if I understood you right. I just tested this and my Voice Command works perfectly with or without BTAudio enabled/disabled. I just turned on my BTAudio and was able to activate Voice Command from my headset without issues. Maybe different headsets have different issues. Thank goodness my Jawbone works as expected.
hi itxda
for me it works the same on 3 different headset.
when BTAudio is enabled, I can trigger Voice command from my PDA only.
when BTAudio is disabled, I can trigger Voice command from PDA and headset.
Im using the default Voice Speed Dial that came installed on my HTC Athena.
"Cyberon Voice Speed Dial version 1.2 Build 070612"
Can you pls specify more what Voice Dial are you using??
BigDede said:
hi itxda
for me it works the same on 3 different headset.
when BTAudio is enabled, I can trigger Voice command from my PDA only.
when BTAudio is disabled, I can trigger Voice command from PDA and headset.
Im using the default Voice Speed Dial that came installed on my HTC Athena.
"Cyberon Voice Speed Dial version 1.2 Build 070612"
Can you pls specify more what Voice Dial are you using??
Click to expand...
Click to collapse
Ah, that's where the mix up is. I'm using Microsoft Voice Command 1.6. Different from Voice Dial which comes with the phone. I found it to be a much better solution for me. Some people with heavy accents prefer the built in voice dialer over Microsoft Voice Command because it's easier to use for them as Voice Command won't understand the spoken commands very accurately. Now I see why it's different for you than mine. We were talking about two different components.
Thks Itxda for your reply
I will try Voice Command ...
BigDede said:
Thks Itxda for your reply
I will try Voice Command ...
Click to expand...
Click to collapse
Good luck. I love the product and no training involved at all.
I searched the forum, asked in some threads and got no answer!
So, how do i voice dial using my bluetooth headset and MS Voice Commander or Voice2go software?
Thanks in advance!!!
alex_mib said:
I searched the forum, asked in some threads and got no answer!
So, how do i voice dial using my bluetooth headset and MS Voice Commander or Voice2go software?
Thanks in advance!!!
Click to expand...
Click to collapse
For MSVC, it should work out of the box. For others, I got it working under my rom since V2 by replacing some dll from HD.
Well, you pair a bluetooth headset, install MS Voice Command (I have version 1.6.19971). Then you restart, go to voice command and enable it (if not already enabled!), check what and how you want the program to behave.
You can select a hard button on the phone (left or right) to engage the program.
Then, when you press the activate/voice/answer button on your headset the voice dial turns on. There you can either DIAL a number by saying the number, or, CALL a person in your phone book by saying that name.
Have fun!
michaelthemage, you're saying that if you bind MSVC to a random HW button, the headset button on the BT headset will start MSVC?
Also, I've tried MSVC myself, although I liked the basic functionality (it's neat!), it drained my battery like crazy (4x normal discharge) and it lacks customizable functionality (e.g. creating a new voice command and linking it to an application.)
jackleung said:
For MSVC, it should work out of the box. For others, I got it working under my rom since V2 by replacing some dll from HD.
Click to expand...
Click to collapse
Can you tell me what DLLs you replaced? where can I get HD's DLLs???
Voice dialing on the LEO???
i cant find it...
did thy not put that on the phone?
No voice dialing over bluetooth?
Are we in 2001?
Yes what a pain!
Tried to get 'Tellme' - no luck there.
Also downloaded 2 Voice Command progs - didn't work or install correctly.
Anyone found an alternative?
Don't worry. This seems to be disappearing from all top spec phones. Nokia's soon to be launched top-of-the line N900 doesn't come with voice dialing either. I had that down as one of the items that would make me go for the HD2. No worries, then.
Try the cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120
zen123 said:
Try the cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120
Click to expand...
Click to collapse
It's working... Except the "assign button" part.
htc-hd2 said:
It's working... Except the "assign button" part.
Click to expand...
Click to collapse
Check this thread http://forum.xda-developers.com/showthread.php?t=585060
Gadgety said:
Check this thread http://forum.xda-developers.com/showthread.php?t=585060
Click to expand...
Click to collapse
Jep.. Starting it by hand is no problem, and I'm already using the "Long_Send.lnk" for an other application.
So for now. I just need to "tap" the start icon.
Activate with bluetooth headset?
Is possible to activate voice dialing over bluetooth?
Thanks.
Thanks i to got it working now
only missing the botton press long time = Voice call
Spizella said:
Is possible to activate voice dialing over bluetooth?
Thanks.
Click to expand...
Click to collapse
I've not been able to make it work, but this could be me.
Bluetooth voice dailing: solved!
See this thread: http://forum.xda-developers.com/showthread.php?t=584415 and use the send command tweak of samberg. Go to your buttons section and assign the send button to Cyberon Voice dailing. Works for me!
msvc
i have installed voice command version 1.6.19209
i got an error message on the install but everything seems to work fine except when i activate a voice call through headset (plantronics voyager pro bluetooth)
it announces through the phone not the headset also incoming calls announce through phone not headset. once the call is connected it works fine on headset. and voice command accepts voice commands on the phone after long hold on headset button. anyone get this to announce over their bluetooth headset please let us know how you did it or if there is another version out there please post a link
thanks all
So...finally got my HD2...easiest machine to set up....looks great...works great....but for Voice Command. Installed the cab, got an error message just like getwet said but otherwise indicated a correct install...but I can't get it to work. Ideas?
maybe i have a fix partial
so i just installed vc version1.6.21725(googled vc and version no. download and found it) overtop of my other version in previous post didn't work with clean install of newer version so reinstalled 1st version then installed newer version
be sure to soft reset after each install then went to settings/menu/all settings/bluetooth/settings tab with gears on it/advanced/audio/put a checkmark in "play system sounds on remote handsfree device" /soft reset and guess what it now works i receive info on my headset it still dosn't announce incoming calls but i can make a handsfree call and hear the response in my headset
hummmm where in VC do i add voice commands to a contact.
the only thing i can find is under: setttings/other/voice command and in there its just settings, not the program and its features
dameblue said:
See this thread: http://forum.xda-developers.com/showthread.php?t=584415 and use the send command tweak of samberg. Go to your buttons section and assign the send button to Cyberon Voice dailing. Works for me!
Click to expand...
Click to collapse
installed: Touch X send button commmanager.cab
now when i press call botton long time i get com manager, as the cap file is sopose to..
HOW dos that fix VOICE DAILING ??
BrownGhost said:
installed: Touch X send button commmanager.cab
now when i press call botton long time i get com manager, as the cap file is sopose to..
HOW dos that fix VOICE DAILING ??
Click to expand...
Click to collapse
Just like I said before: Assign the button to Cyberon Voicedialing by change the button in the [setting] - [more] - [personal] - [button] section. This made it work for me
dameblue said:
Just like I said before: Assign the button to Cyberon Voicedialing by change the button in the [setting] - [more] - [personal] - [button] section. This made it work for me
Click to expand...
Click to collapse
first of all this is MS Voice Dailing programe
Secound off; LEO HD" dos not have botton config under settings/more/
it dos not even have settings/more/ PERSONAL <-
BrownGhost said:
it dos not even have settings/more/ PERSONAL <-
Click to expand...
Click to collapse
Mine does.