Apologys if this is a repeat post but i need help.
I have just received my shiny new jasjar phone after upgrading from an m1000 spv.
I cannot get on the internet with it though using gprs. What are the setting that i need to change? What are the settings required for mms?
Any help will be greatly appreciated
Hi TimeCreature.
As you've bought a JasJar, you need only register your JasJar @ clubi-mate.com, which will give you access to all their on-line help. There you will find a section for all the network providers settings for pay-as-you-go or contract. They will be in .cab format after you dowload. Copy it to your SD card and install to your device from there. That's it.
Firstly, o2 will not support GPRS usage on Pay and Go. If you're wanting to use 3G, then you'll need a new SIM. Freestyling with settings here;
APN: mobile.o2.co.uk
username: o2web
password: password
Any more problems, let me know.
Registerd your deive with i-mate after that download settings from there website.
Related
Hi,
I got this unit from ATT and now using with Cingular. I am trying to get to GPRS and internet settings for cingular. When I call them they say they don't know it since it is not their phone.
Is there anyone who managed to get the internet connection on another network? And how please?
Thanks,
Fatih
GPRS configuration
have the same problems. i got the MDA form T-mobile but need to use it with austrians mobilkom GPRS. I didnt manage to connect up to now!
I managed to get it working.
Here how it is:
Get the APN, user name and password info from your provider, and have your GPRS account activated.
For cingular users
APN: wap.cingular
USER: [email protected]
pWORD: CINGULAR1 (PAY ATTENTION TO LOWER/UPPER CASE)
Go to
>settings
>connections
>connections
>select "new"
>select "Cellular line GPRS"
>it will ask you APN
say connect.
Then it will ask user name and password. That's it.
Fatih
I'll try. thanx
Fatih,
I tried your settings and its ask for username, password, and domain. what should I put for domain?
No Domain Required
Just put in the info listed above. Then it will work great.
Good Luck!
fatih said:
I managed to get it working.
Here how it is:
Get the APN, user name and password info from your provider, and have your GPRS account activated.
For cingular users
APN: wap.cingular
USER: [email protected]
pWORD: CINGULAR1 (PAY ATTENTION TO LOWER/UPPER CASE)
Go to
>settings
>connections
>connections
>select "new"
>select "Cellular line GPRS"
>it will ask you APN
say connect.
Then it will ask user name and password. That's it.
Fatih
Click to expand...
Click to collapse
Sorry.....
that I didn't quite get it
after connected to the wap.cingular
what should I do next????
You mean add another new moden????????? :?:
Thanks for you help
SX 56
I use the settings for my sx56 and the internet only works when its connected to the cradle, I use comcast highspeed cable. any help in resolving this problem would be apreciated
Thanks for the info. Popped it in, everything's working great now.
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
choco_bunny said:
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
Click to expand...
Click to collapse
Is this what you have so far:
How do I configure my PC for my new mobile Internet access?
Prior to using GPRS service, you will need to configure your PC using the CD-ROM included with your handset or device. If your software is not already configured, you will be asked for your Access Point Name (APN). Enter internet.fido.ca when prompted. Then enter your user name (fido) and password (fido).
If not give it a try.
Ok some of this is new to me. I did not get a CD with my SX56. I got if off eBay and the seller didn't include as Siemens CD but he did give me a cd wit some files on it...I have no clue what they were so I left them alone...
So now I have to configure somethin on my Desktop PC b4 using GPRS on my mobile device? I'm very lost at this point. I do have those fido settins, altho I think wap.fido.ca is the propper APN.
Thanks for helpin out man. I'd love if somebody could clear this for me. Thanks in advance
iggy said:
choco_bunny said:
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
Click to expand...
Click to collapse
Is this what you have so far:
How do I configure my PC for my new mobile Internet access?
Prior to using GPRS service, you will need to configure your PC using the CD-ROM included with your handset or device. If your software is not already configured, you will be asked for your Access Point Name (APN). Enter internet.fido.ca when prompted. Then enter your user name (fido) and password (fido).
If not give it a try.
Click to expand...
Click to collapse
Well this is about all I could find, I hope this helps more.
My settings are
APN= wap.fido.ca or internet.fido.ca
Userid = fido
password = fido
IP is 205.151.11.11
or
http://www.howardforums.com/showthread.php?s=&threadid=100789
or
For Fido's WAP using GPRS:
APN: wap.fido.ca
username: fido
password: fido
IP: 205.151.011.011 (the last zero might disappear, but won't affect anything)
ok so since last night i have been able to "connect" to Fido.... but i still can't send emails or use IE or MSN messenger...what gives? I'm gettin error messages all the time on IE....ahhhhhh
thanks for help so far!
Fido WAP on Prepaid.
HTC Wizard, Qtek 9100, T-mobile MDA running WM5 and WM6 (both tested)
This is web only, no ssh, no messenger, no email outside of webmail.
Name for the location: Fido
Select a Modem: Cellularl Line ( GPRS)
APN wap.fido.ca
User name: fido
Password: fido
Domain: 205.151.11.11
Proxy Settings Tab
Check This netowrk connects to the Internet and This network uses a proxy server to connect to the Internet.
Proxy server:205.151.11.11
I have just purchased a k-jam and I am on a vodafone uk contract and I am not being able to connect to the internet. Can someone give me any advice on the necessary connection methods. Vodafone are not being of any help.
Assuming you have GPRS etc enabled on the SIM and its a contract SIM
use the following:
username: web
password: web
APN/Access Point Name: internet
Should work fine..
The best way to go online with your contract is to use GPRS. This is very easy to set up on the Wizard.
Firstly click Settings
Then click the Connections tab at the bottom
Next select Connections
Under My ISP, choose 'Add a new modem connection'
Give the connection a name (e.g. Vodafone GPRS) and select the modem type as 'Cellular Line (GPRS)'. Then click next.
Now enter the 'Access Point Name' as internet and click next.
Now enter the User Name as web and the password as web and finally click finish.
That should do it. Now open internet explorer and enter a web page and you should be ok. You will, of course, have to setup your e-mail settings separately.
Hope this helps
Hi,
Just unzip this and Install the Vodafone CAB.
Hi tried installing Vodafone_UK_PAYT.CAB on my XDA Mini S, goes through the install ok, but for some reason it doesn't seem to add any of the settings
Any ideas why? Does it need the k-kam ROM or some additional settings from this for it to work?
thanks in advance
Graeme
i wouldn't bother with the cab file at all. just set it up manually.
there is a good tutorial on vodafone web site:
http://online.vodafone.co.uk/dispat...&_pageLabel=Page_BOS_PDA_Guide&pageID=GM_0302
the salient points are:
dial:
*99#
post dial string:
+cgdcont=1,"ip","internet"
speed setting:
57600
untick:
wait for dialing tone
stop bits set to 2
user name:
web
password:
web
rgds
sry, stupid me. thats for an external phone modem ....
sorry to hyjack fellas but same topic . I have a wanadoo broadband contract and use a wireless modem router for my home PC network.
How do I set the wizard up to utilise this? please make it simple fellas :roll:
ok sorry doh all sorted now. Just had to click on the wifi icon and its connected surfin yeah. Now just got to set up my emails.
ok, GPRS setup / working now.
Just did this manually as per Hampers' post above but had to change the access point name to pp.vodafone.co.uk (case sensitive) for the connection to work as am using a Pay As You Talk sim
G
Hi I have just transfered my MDA compact to accept Vodafone sim card..I used this forum it is excellent. However I have tried using most of the previous post in respect to setting up GPRS and MMS settings ..all have so far failed.
Info.
I have MDA compact
I have a corporate Vodafone UK sim card..GPRS enabled.
Please help.. :?
Check this link,u can find every network setting there:
http://forum.xda-developers.com/viewtopic.php?t=13498&highlight=o2+mms
Cheers.
kuangtian - i have done that but no luck
Hi thanks
But no luck..any more ideas
:?
There are Vodafone Contract and Pay as u go.Quite different.Did u selected the right one?
Just download the right cab and install it.
help please
I did download the contract one..but no luck..message comes..up that the download ay not work as it was designed for previous windows mobile software...
so u should try the last one.I just tried on my friend's [email protected],it works.
cross your finger man.
No luck please help am desperate..vodafone setting required
Please help vodafone setting required for gprs.
MDA compact
"ISP" connection
APN - internet
User and pass - web
"Work connection" (For vodafone live)
APN - wap.vodafone.co.uk
User & pass - wap
Proxy - HTTP - 212.183.137.12:8799
Proxy - WAP - 212.193.137.12:9201
Proxy - Socks - 212.193.137.12:1080
Proxy settings are required for the "Work" connection
GPRS - Vodaphone
Click on this link below:
http://www.filesaveas.com/gprs.html
You should find the info that you need here......
no luck yet
Spoke to vodafone..they said i am gprs enabled via the blackberry tarif.,
However i havent got a blackeberry ..i just had bog standard nokia issued to me from work...which i switched the sim to my mda compact..but cant get GPRS work..
Hi all,
I've got my sim-free HD2 from superetrader uk. But after inserting my o2 sim, I got a really big problem that I can't get to web!!
I used "O2" network settings found by HD2 automatically. But it always said
"Cannot Connect
Dialed: mobile.o2.co.uk
Cannot connect for an unknown reason. To check your connection...blahblah"
when I tried to access 3G.
I've tried many ways suggested on the internet, including removing username and password in the connection settings, adding DNS ip, and even using hard reset. But thay can't work at all.
But my sim does work well(accessing 3G) in my HTC HD(that rom supports 3G and connection settings are with blank username, password and DNS).
I nearly suspect there is a manufacturing problem with my phone.
Plz help me! I've struggled for 2 days and gonna explode!!
THANK YOU VERY MUCH!!
To find a solution, please go to #6. Thanks!
can you try to go on the o2 site using your pc and download the settings to your phone via mms/sms
are you a payg customer
are you using pay as you go?
if so on my mates phone on O2 it downloads the wrong connection settings when it does the automatic setup and you need to edit them to get it to work
Find and edit the right name for your accesspoint.
At german o2 it is APN (Zugriffspunkt) : webmobil1
Thank you all!!
You helpful guys all hit the point!!
Exactly I am a pay & go user.
After I got your replys, I asked my friend who also uses O2 pay&go with S1. He told me a different APN. Then I tried and it worked!!
So it's right a wrong access point name setting problem.
THANK YOU ALL VERY MUCH AGAIN!!
Here are my correct connection settings for UK O2 PAY & GO USER WITH A SIM FREE HD2 if you undergo a pain with accessing internet:
Settings - Wireless controls - Menu - Connections - Add a new modem connection
[you can delete all other connections first if you only use o2 mobile internet]
Enter a name for the connection: mobile web (whatever you like)
Select a modem: Cellular Line (GPRS)
Next.
Access point name: payandgo.o2.co.uk
Next.
User name:
Password:
Domain:
(These three items are all left BLANK)
Advanced...
(Just use the default settings)
Finish.
OK.
OK.
Close.
Now it works.
Alternatively, you can use automatic config by choosing O2 from network database of HD2. Then you can just manage the connection "moblie web" by changing access poing name to payandgo.o2.co.uk and deleting both username and password.
Hope that's clear!
Thank you loads! I was having the same problem and thanks to this post I managed to sort it! Nice to know the automatic O2 settings thing works about as well as a chocolate teapot!
Again thanks