I had a reply from Carrier Devices, The manufacture of the QTEK1010 (XDA).
I sent the following email:
I am interested in obtaining an upgrade for my QTEK1010 PDA. I'm after Windows Mobile 2003. Is this obtainable or is it going to be. According to Microsoft's web site, you the OEM are the people to talk to about this. Look forward to hearing from you.
Regards
Jason Moodie
I recieved the following email:
Dear Jason,
Microsoft Mobile 2003 represents several major feature enhancements to Pocket PC 2002, especially in the connectivity and mobility aspects where the Qtek 1010 is very strong. As Microsoft has just released the new upgrade there will be a short delay for us to finalise the other elements we need to add to the operating system in order to complete our devices. We will be providing an upgrade at an additional cost once our integration is complete and we have checked the compatibility of existing applications with Microsoft Mobile 2003.
Best regards,
John Williamson
I am requesting a ETA on this upgrade. I will keep you informed.
Does anyone know if Onspeed works on the Universal? It saves me a packet on my GPRS data transfers (excuse the pun)
Hi Xiasma
I asked OnSpeed support and they sent me this : -
Dear Sir/Madam,
Thank you for your email.
Windows mobile 5.0 will be supported in our new version, that we will be launching in less than three months.
For the time being, we are sopporting Windows Pocket PC 2003
Please contact us if you have any more queries.
yours,
ONSPEED Customer Services
Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
JFONSECA said:
Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
Click to expand...
Click to collapse
I used to have kse truefax, which worked a treat - but that was on orange.... who set me up with a second exclusively fax/data line with its own number.
Bloody O2 dont do that.
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
hollytree said:
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
Click to expand...
Click to collapse
Does that allow you to receive faxes to your device?
It doesn't work
Hi,
I tried that software, but it's only to view fax files, it does not allow to send or receive faxes.
i'll keep looking for a working alternative.
Thanks,
JFonseca
Hi
I found this one on a Yahoo Group:
http://www.samtechnc.com/eng/introduction/mfax_intro.htm
It should work on my Qtek 9000, but i was not able to try, because i don't have enough skills for that.
Maybe someone here can try and post their experiences
Mfax is for PocketPC 2003. I asked them when they may make it available for WM5 and got the following reply;
"Right now we do not know if and when we will be able to support Windows Mobile 5.0 Pocket PC Phones with our software.
The problem is that the modem i.e. network manufacturer (Qualcomm with their CDMA network) is not supporting fax class 1 or 2 in their system. Therefore we are not able to support the WM 5.0 Pocket PC Phones (or the CDMA based WM 2003 Pocket PC Phones). Furthermore HTC is - due to the lack of support from Qualcomm - not able to support us either.
So we are stuck in the middle. As long as Qualcomm doesn't set a higher
priority to the fax class support within their network (modem) we can do
nothing about this issue.
As soon as they would change this issue we would immediately be able to
support WM 5.0 Pocket PC Phones as well as CDMA phones using their network.
Frankly, I do not think that this issue will be solved soon. Faxing is still
seen as not important by the big companies (which I certainly do not agree, but we do not have a lobby or a direct contact person at Qualcomm, who has the power to change this)."
Maybe we should start lobbying Qualcomm.
We are MFaxCE's developer
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
samtech said:
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
Click to expand...
Click to collapse
any news ?
I tried KSE and it didnt work. (internaml modem error or something like this)
does anyone nows other apps ?
unfortunately there is no software for fax, working on WM5 platform. developers promise to correct problems in nearest future. you can use internet service to send/receive faxes.
thanks
Please, Could anybody tell me if there is any software to send faxes from the S200?.
thanks in andvace
no idea
I tryed every software i found, none worked for me
please help!
P.S. I want to use my XDA as a fax modem to SEND faxes. I know that I need to pay the provider for extra data-number if i want to receive faxes..
As far as I know there is currently no fax software working on WM5 devices - I looked because I wanted it also. KSE have good software but not WM5 compatible.