I had problem with connecting bluetooth GPS (Nemerix Adapt), but my headset (Bluetrek) work correctly. When I installed BTTool, the GPS work fine now, but my headset does not work after this instalation. I used hard reset, after which Bluetrek (headset) works perfectly , but the GPS didn't work. If I install BTTool again, GPS works now, but the headset not ;o(((. Could you help me?
Sorry for my terrible English.
Related
Hi
I recently bought the XDA II, and TomTom Bluetooth GPS, got it all working no problem ROM version 1.66.181.
Ive just ordered a Jabra 250 bluetooth headset, however someone told me that you cannot use the bluetooth GPS and the bluetooth headset at the same time.
Is this true ?, if so is there a fix for this.
Cheers
jabra + bt gps.
works fine here, occasionally you get cracking on the headset audio
Works fine for me too.
Make sure you install the bluetooth patch.
One caveat here that I found was that the order you create the bondings seemed to matter for me. When I had the Jabra installed first then did the TomTom gps, the headset didn't work. When I unbonded then rebonded the Jabra (leaving the gps in place) everything works great.
db
Hi,
I've tried all the guides in the previous threads about getting TomTom 5.21 to work with other bluetooth GPS receivers but still no joy... it works perfectly with the tomtom BT receiver, but not my parrot 3300.
I've installed GPSgate as this will make it easier when swapping between cars and therefore whether I am using the TT receiver or Parrot...but... even with gpsgate installed, still can't get it to receive anything from the parrot. (I know the parrot is working fine cos my iPAQ on WM2003 works perfectly with it)...
I'm getting more and more frustrated with the crap bluetooth abilities of WM5 ... has anyone else got gpsgate working with their BT GPS (ideally parrot!) - if so, what com port is your input set to?
Thanks!
Hi
I have no problem with the parrot 3300 the handsfree work great the GPS works great.
Once I tryed to use 2 diffrent gps the parrot a Nokia GPS bluetooth if one work the anther well never work what I had to do is say for example I had the Nokia GPS set up to outgoing port 0 when I whatedb to use the Parrot I had to delete the outgoing port of the Nokia GPS and created a new one for the Parrot then the parrot will work.
The software that you are using from what I have read it is for one gps to use several diffrent application it is not for 2 diffrent gps to use the same application.
Ciao
Gigino
ok played some more and got it working with the parrot now... as you say it is not designed for 2 gps into one software, but at the moment it is the only way I can get the parrot to work with tomtom...
will keep on playing to try and make it work, but tried all the guides so far in this forum and still no joy apart from gpsgate
does the sound from tomtom come through your car stereo speakers? I can't get mine to do this? the handsfree phone part works fine...
I'm afraid no you well not get any sound through you car speaker with Tom Tom.
Regards
Gigino
GMTRB5 said:
does the sound from tomtom come through your car stereo speakers? I can't get mine to do this? the handsfree phone part works fine...
Click to expand...
Click to collapse
Please refer to http://forum.xda-developers.com/viewtopic.php?t=39735
Hi all,
I just bought a Sony Ericsson HBH-DS970 stereo headset, which worked very well in the shop (handsfree functions and music from WMP).
I use Tomtom V6 and a Globalsat BT359W receiver. Tomtom works very well with the BT359 and the original Tytn headset. The SE HBH-DS970 works very (very) well alone, but when I want to use Tomtom, SE HBH-DS970 and BT359 all together I got a sound chopped and unusable, even from WMP. If I power off (for tests purpose) the BT359, the sound goes back very well. I make a lot of tests: remove BT headset and coupling back, remove BT359 and coupling again, soft reset... and sometimes, it works perfectly. Yesterday I reinstalled Tomtom from scratch and it ran OK, I started more than 10 times and it worked, I believed the trouble was fixed, but this morning, after powering on the device, it was back. I am unable to find how it becomes working because it seems to be aleatory.
Does somebody know this trouble ? Could somebody help me to fix this trouble ?
Thank you very much.
I have the same problem with Garmin Mobile 10 GPS and R35 bluetooth clip. As soon as I start using GPS I my sound through R35 gets choppy. Is it about how the bluetooth stack is implemented in the Hermes?
JohnieWalker007 said:
I have the same problem with Garmin Mobile 10 GPS and R35 bluetooth clip. As soon as I start using GPS I my sound through R35 gets choppy. Is it about how the bluetooth stack is implemented in the Hermes?
Click to expand...
Click to collapse
I don't know, it seems that what we hear in the headset is the polling of the GPS receiver. It could be from the MS BT stack or from the BT driver in Tomtom (or Garmin), but I am not enough expert in PPC to diagnose properly. I am impatient to be able to install Widcomm stack on my Tytn, but it is not ready.
BR.
hi everyone,
I have this problem with my diamond BT , whenever I try to connect it with a BT headset, it DOESN'T recognize it. I always check that the diamond is visible to other devices, and of course that the headset is turned on , but it still doesn't recognize the headset. I tried couple of headsets and I have the latest ROM (Dutty's), and still....
so please, does anybody have a clueeee????
thnx in advance
I had this problem with my carkit, installed this program and works like a charm now: http://www.jetwaremobile.com/
Hi,
I have a Touch 2 and I am having troubles conneting it to my Volvo BT carkit.
With my S730 evrything worked fine.
Now the phone paires with the car and syncs the adressbook, but when I initiate a call from the car or the phone, the carkit just doesnt know he is in a call and does not mute the radio. I don't hear any sound through the speakers at all, but the phone thinks it is connected to the carkit and is in handsfree. Pretty anoying as you can imagine.
I upgraded the car's BT stack to the latest version 04.23_R but with no result. Disabling the data connection worked for some people but not for me.
Do you guy's have any registry hacks or procedures I could try?
The old phone worked great so there at least should be some backwards compatibility.
Thanks,
Jan