Hi to all, my magician is bruised and i don't know what can i do! Has someone seen a cover on some site? (i mean the original alluminium cover)
Thanks
Have a look at this thread: http://forum.xda-developers.com/viewtopic.php?t=25673
Related
Can someone tell me how to take apart (or point me to a site that does) the Magician? I've got a buddy who anodizes paintball guns, and I thought it would be kinda cool to have the aluminum housing of my magician anodized... but I can't figure out how to get it open. I undid the two screws, but that didn't seem to loosen anything, and I'm afraid to use too much force prying on things (for obvious reasons :? ). Any help would be appreciated.
Here you are
and here is a topic on that subject http://forum.xda-developers.com/viewtopic.php?t=16288&highlight=disassembly
Very helpful. Thanks!
Skyward said:
and here is a topic on that subject http://forum.xda-
developers.com/viewtopic.php?t=16288&highlight=disassembly
Click to expand...
Click to collapse
Why doesn't the Prophet have its own picture in the Forum Index? It is so unfair :wink:
Why isn't there a Magician, Charmer, Wizard or Universal?
Hear Hear... Why Does our beloved prophet not have a picture?
lutzs said:
Why isn't there a Magician, Charmer, Wizard or Universal?
Click to expand...
Click to collapse
Actually...there are - apart from the Charmer which looks identical to the Magician. :?
It would help us newbies equate which device is which in and amonst the throng of different aliases the devices have...
oh damn i must be fool, i think of the title picture when you visit the side!
Hi
First i would say that my english is not so good
But the problem i have is that my hermes/tytn is wery loose in the slide mekanism.
Is there a way to get it tighter?
Any help would be nice!
Thank's
If you get a bit of thick sticky tape and put it over the groves. Slice it down the middle of each grove and that should help keep it a bit tighter.
There is a tutorial here somewhere.
aha, almost like the Nokia N95 fix then
Thank's for fast reply!
husa550 said:
Hi
First i would say that my english is not so good
But the problem i have is that my hermes/tytn is wery loose in the slide mekanism.
Is there a way to get it tighter?
Any help would be nice!
Thank's
Click to expand...
Click to collapse
There is only one way to truly fix this problem and that is to correct the defect in the sliders/runners:
http://michael-channon.spaces.live.com/?_c11_BlogPart_BlogPart=blogview&_c=BlogPart&partqs=cat%3dHermes%2bFixes
This has been discussed here in other threads and the above fix has been done with reported success (including me) and is also contained in the Hermes wiki.
Here's one of the threads:
http://forum.xda-developers.com/showthread.php?t=298784
NB: Does require dismantling and is warranty voiding.
Mike
Hi there, im new & loving this place & my tytn.
My stylus has just developed a loose problem so bad that it can easily fall out?
I see lots of solutions around for the wizard, is it not common with the hermes?
One solution was the paper in the holes near the battery but unlike the wizard, the hernes are filled. Apologies if this has been answered but all i really got with the search related to the wizard. I dont want to dismantle.
Thank you for any suggestions you may have.
Pete.
peewee09 said:
Hi there, im new & loving this place & my tytn.
My stylus has just developed a loose problem so bad that it can easily fall out?
I see lots of solutions around for the wizard, is it not common with the hermes?
One solution was the paper in the holes near the battery but unlike the wizard, the hernes are filled. Apologies if this has been answered but all i really got with the search related to the wizard. I dont want to dismantle.
Thank you for any suggestions you may have.
Pete.
Click to expand...
Click to collapse
YES, it's common. Caused by a little plastic block comming off. It will all become clear here:
http://forum.xda-developers.com/showpost.php?p=1206800&postcount=35
Mike
Thank you for your reply your a star, is there a guide showing how to get to that point, much dismantling?
peewee09 said:
Thank you for your reply your a star, is there a guide showing how to get to that point, much dismantling?
Click to expand...
Click to collapse
You only need remove the back cover. Be careful replacing the back cover to align the macro arm of the camera.
For dismantling guides and videos:
www.mikechannon.net
Mike
Once again Mike thank you. Im amazed at this phone & was lucky to spot grade B stock on ebay selling for only 65 pounds, only thing missing was the box & extras but phone condition is almost new.
Has anyone come across a plastic rubberised case like this one for the HD2?
http://cgi.ebay.com/NEW-HARD-RUBBER...wItemQQptZPDA_Accessories?hash=item4ce72f4a4e
I bought one of these for my Touch HD and it is fantastic, but upgraded to the HD2 now
and can't find one like this anywhere.
Cheers,
Richard.
Sorry thought I'd posted this in the accessories section. Can an admin please move my post. thanks.
There a thread about cases in the accessories sub-forum... if anyone's found one, it will probably have been posted in there
http://forum.xda-developers.com/showthread.php?t=578283