how to make a hard reset? - JASJAR, XDA Exec, MDA Pro General

My friend has a o2 exec with test version...
Can't find a way to hard reset the unit...
Is the same way like holding the power button and reset hole?
We did itfew times but just can't hard reset...
Any solution to this?

parkertseng said:
My friend has a o2 exec with test version...
Can't find a way to hard reset the unit...
Is the same way like holding the power button and reset hole?
We did itfew times but just can't hard reset...
Any solution to this?
Click to expand...
Click to collapse
You need to press the 2 "-" keys on the top of the keyboard and in the same time do a soft resset !

Also try-- 'Clear Storage' in Programs (PIN is 4321)

Related

Can't get my K-Jam to hard reset

Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)

Hard (Factory) Reset

Hi,
Sorry if this has been asked a 1k times before! - I have searched and googled but could not find an answer!
Just a simple one to start with! How do I perform a hard reset on a Magician (SPV M500)
Thanks
Lee
Hi,
Think I found the answer, so posting here for others:
Fairly simple in the end - as I thought: whilst pressing the power button, insert the stylus into the soft reset hole and press the reset button - release both button and the device should perform a hard reset.
Cheers
Lee

Hard reset not working??!?

Hi,
Desperately trying to hard reset an MDA Vario.
Holding comm button, voice command button and hitting reset but after 100 times its just not working.
Is there another way of doing it? Just what am I missing??!?!
Thanks in advance,
HPJ
You are doing it the correct way, after you hit the reset button you should see something like "Press send to restore factory default" you should then press "SEND" ie: the green telephone button.
You could also try "Settings/system/Clear Storage"
Cheers.
That did the job, thanks. No idea the usual way would not work, and its good to know that 'clear storage' performs a hard reset....I orginally thought it may only do a soft reset!
Cheers
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Dave... said:
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Click to expand...
Click to collapse
as well, I struggled with this for ages as well. On my Wizard with the latest imate ROM you have to HOLD the Comm Mgr + Voice Dial (and when still held in) press & release the reset button BUT CONTINUE TO HOLD THE TWO BUTTONS until a message appears on screen saying press the green send button to Hard Reset
Dave idea "Settings/system/Clear Storage" is better..i was struggling with hard reset

Hard Reset and Soft Reset?

I brought my phone 2nd hand off my cousin but he doesnt have any of the manuals can some please tell me how to hard reset and soft reset?
thanx
soft reset - there is small hole at the bottom right, use stylus to pin into it
hard reset - same as soft reset + press the power button

My Herald won't Hard Reset!

Help guys,
I've read the manual, but i am unable to HARD RESET my HTC Herald, I always SOFT RESET the phone because I have software applications problems - but I want to do a full hard reset, hoping it fixes the phone - (the SOFT RESET doesnt work).
I know you're supposed to hold the reset button down with your stylus after holding the two soft keys, but the moment I touch the Reset button with my stylus it immediatly soft resets...
Any ways to get around this?
you should be pressing the reset button WHILE holding the two soft keys. Make sure you keep holding them. The hard reset confirmation screen won't appear until you release them though
fzzyrn said:
you should be pressing the reset button WHILE holding the two soft keys. Make sure you keep holding them. The hard reset confirmation screen won't appear until you release them though
Click to expand...
Click to collapse
witch keys are the soft keys
On my Herald one only needs to press the two soft-keys, NOT the reset button on start up. In conclusion, 1. turn off device 2. turn on device and directly press the two soft-keys. By doing this at least I get some text on the screen and that I should press send to do a hard reset.

Categories

Resources