Generally, if I want to search quickly in the Contact-list just need to press and hold the navigation button up or down, and it starting change the first letter, and when I release the button the cursor jumps to the appointed letter.
It's known to all.
I have installed the Qtec 1.06 ROM and afterwards the new i-mate 1.06 ROM, this option disappeared.
How can I restore it?
Hello everyone,
the last days i am trying to flash my Blue Angel up to WM6 (WM5 would be OK too).
I tried about 1001 times to get into the boot options, but everything i could see was this /%&§ colored screen.
However, i managed to get it an installed WM6 sucessfully.
But now my Problem:
After softreset WM6 was gone and everything i could see, was this %&$§" colored screen again!
Back to 2003SE works fine.
I tried it many times again, stuck at the colored screen, after 1001 tries i managed it again to get into the boot options, and the same again, softreset ad wm6 was gone.
Anyone out there who can give me a hint, what to do?
I was wondered to see only the R 1.10.00 on the colored Screen.
Whats with P an G? Do i need it for WM6? Where to get it? Need i special versions for WM6?
Thanks for help guys!
I think you were doing just right, read WiKI steps more carefully for setting No Yes Yes and then pressing message button.
I was really... really really shure, that i did it right.
But you made me so confuse, that i read the Wiki again and again.
Testet it, and ist the same problem...
Just this morning, my XDA fell down, the battery disconected and all of my data were lost.
Might it be a problem with the internal battery?
Or is it normal, that every data wil be lost, if the battery is removed?
1. You did not made proper hard reset in WM5/6, that's why it could not boot. No suprise here.
2. Yes, read the manual - lack of power = HardReset in PPC2003. If your backup battery is dead (nothing special in such an old device) even a while without battery kills the memory. New BA holds the data just for few minutes.
After the flash process finished with 100%, i resetted with softreset and holding the power button. Isn't that the hard reset?
The windows software says, that the internal battery is 100% loaded but it made me a little confuse, that all the data was lost.
I really read the wiki
Could you send us the link to "wiki" that you were reading?
man, you really have plenty of time doing as much as 2k+ resets.
anyways... you need to hard reset your BA.
use the record+camera combination for hard reset.
like i posted in this link
hope that works
From the WIKI:
When the upgrade is completed, you must perform a Hard Reset
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting or press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
Click to expand...
Click to collapse
Hi guys,
i update my Cingular 8125 (Wizard) with the latest WM6.1 TNT Series Rom successfully 3 days ago. But today i am facing problem with power button (i think). My cingular 8125 not going into sleep mode by pressing power button and shutting down notification automatically appears after a little time without pressing the power button. If i click on yes (on shutting down notification), then TNT screen appears but after a while then screen goes blank but Yellow LED (situated with ear piece) blinks properly. I re-flashed the same Rom again but i have still the same problem. I also updated it with latest Slim Diamond Rom but the same problem. Please help me guys.
Sounds like our power button is stuck (hopefully) or broken. Does it feel like it springs back out after you press it?
Yes button is working correctly.
First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!
i loaded an original wm5 rom on it (with radio,ceos and external) and now it's only showing big orange screen with radio version G and D lower...it won't load windows.i still want an original rom because on 6.1 when i access wi-fi manager it has a little error. hope getting better help from you guys than the hp 6915 forum.i was a little dissapointed of that community..
solved. 5 points for me
new problem. i installed tomal's rom and when i press the light buton (so the phone can wake when screen black) it goes into the backlight options, very annoying. in the original wm5 when you press that button it only lights the screen, not goingo into the backlight screen..
cataioan said:
new problem. i installed tomal's rom and when i press the light buton (so the phone can wake when screen black) it goes into the backlight options, very annoying. in the original wm5 when you press that button it only lights the screen, not goingo into the backlight screen..
Click to expand...
Click to collapse
solved. i went to button asignment menu and but the backlight button to none.
Glad to hear that