Generally, if I want to search quickly in the Contact-list just need to press and hold the navigation button up or down, and it starting change the first letter, and when I release the button the cursor jumps to the appointed letter.
It's known to all.
I have installed the Qtec 1.06 ROM and afterwards the new i-mate 1.06 ROM, this option disappeared.
How can I restore it?
Related
I use a german mda compact for a while. Since some days I neither could turn off with the button short press (however with long press the screen goes dark...) nor use the bottom right button (for schedule). When I press them nothing happens! All other buttons are ok! I used 1.12 rom, now I downgraded back to 1.06 (original) and have the same problem.
Anybody can help?
Hello all. I'm new to this...
I just bought a K-jam on ebay, charged it, turned it on and... nothing.
I am stuck on the boot screen that shows IMATE with the various versions:
ipl 1.01
spl 1.06
gsm 01.01.10
os 1.1.9.3
The device hangs there and I can't do anything: can't power off, etc... The only thing i can do is soft reset but that doesn't help...
Anyone has an idea? Sure enough the seller does not respond to my emails anymore...
Did you try doing a hard reset? press the com manager button (Top left on the side) and the voice command button (top right on the side) while having them pressed do a soft reset. Keep the two buttons pressed and the device should say something to the effect of "press send to restore to factory settings", hope that will fix your problem.
Might sound stupid, but my device freezes at boot-up somtimes as well.. ..However, when I tap the screen during bootup it doesn't! :wink:
In my case I think it's due to the amount of programs on my device
HEEEEYYYY come to think of it my device did that before I upgraded to xelecin's custom rom LOL I remember I had to stay looking at it to tap the screen as soon as it would turn off. Since it stopped doing it, I never really looked into why it was doing it.
Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!
natan said:
Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!
Click to expand...
Click to collapse
Since this just begun happening, it sounds like recent software you installed is corrupted and causing this. If you did install software just prior to this, uninstall the software then power off and on your device.
im having the same problem with my volume control going haywire, and random letters being displayed on the screen. but this happened after, which i now realize was an incomplete upgrade crossbow cause my device was cid-locked. i followed the "g4 hard spl (cid unlock)" topic, then upgarded to the "touch" rom, but i still get the same problem. any insights?
'Do a Hard Reset' of the phone,although you'll loose all your personal data,contacts messages etc...,but phone will reset to default settings and erase all corruptions,otherwise do a reflash.
Cheers !
i tried doing a "hard reset" but it wont work. the screen says to push the 'send' button, but when i do the button doesn't respond. so i tried a reflash but im still getting the same problems. do i need to reflash to an older rom, then upgrade again? if so, where can i get an older rom version, or perhaps the qtek 9100 original rom?
so i undid the hard spl lock, and reflashed my phone with the vodaphone qtek 9100 rom package. everything seems fine when the battery is full, but as the battery power goes down the problems become more frequent. the phone thinks buttons are being pressed, ala the lights on the keys are on, the volume constantly goes up and down, contacts open. can anyone help me? i dont know what left to do
Me too, it is if the down button is being held down.
need to bumps this thread. really need some help to fix this. its really frustrating me
two weeks and still no progress
someone? anyone? guide me and any others who are having this problem in the right direction. dont want to give up this phone, i really like it.
Same problem over here
Is you’re problem fixed or still the same... My phone is doing exactly the same.
my phone is still not working properly. cant find any solutions
Hello everyone,
the last days i am trying to flash my Blue Angel up to WM6 (WM5 would be OK too).
I tried about 1001 times to get into the boot options, but everything i could see was this /%&§ colored screen.
However, i managed to get it an installed WM6 sucessfully.
But now my Problem:
After softreset WM6 was gone and everything i could see, was this %&$§" colored screen again!
Back to 2003SE works fine.
I tried it many times again, stuck at the colored screen, after 1001 tries i managed it again to get into the boot options, and the same again, softreset ad wm6 was gone.
Anyone out there who can give me a hint, what to do?
I was wondered to see only the R 1.10.00 on the colored Screen.
Whats with P an G? Do i need it for WM6? Where to get it? Need i special versions for WM6?
Thanks for help guys!
I think you were doing just right, read WiKI steps more carefully for setting No Yes Yes and then pressing message button.
I was really... really really shure, that i did it right.
But you made me so confuse, that i read the Wiki again and again.
Testet it, and ist the same problem...
Just this morning, my XDA fell down, the battery disconected and all of my data were lost.
Might it be a problem with the internal battery?
Or is it normal, that every data wil be lost, if the battery is removed?
1. You did not made proper hard reset in WM5/6, that's why it could not boot. No suprise here.
2. Yes, read the manual - lack of power = HardReset in PPC2003. If your backup battery is dead (nothing special in such an old device) even a while without battery kills the memory. New BA holds the data just for few minutes.
After the flash process finished with 100%, i resetted with softreset and holding the power button. Isn't that the hard reset?
The windows software says, that the internal battery is 100% loaded but it made me a little confuse, that all the data was lost.
I really read the wiki
Could you send us the link to "wiki" that you were reading?
man, you really have plenty of time doing as much as 2k+ resets.
anyways... you need to hard reset your BA.
use the record+camera combination for hard reset.
like i posted in this link
hope that works
From the WIKI:
When the upgrade is completed, you must perform a Hard Reset
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting or press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
Click to expand...
Click to collapse
Hello,
I've a little problem with my qtek 9100.
my phone thinks 1 key of d-pad is always pushed
so every time I boot it, or I go to landscape, my phone will scroll down till I push a button.
Is this a known problem ?
is it possible to disable the key ? , I'm normal not using it.
Roel