Hi, I'm trying yesterday to kitchen my own ROM and I found some problems with 4.01.12 ENG O2-Euro - it told me that there is problem with kitchen this ROM. But I want some ENG ROM without T-Mobile.
Another issue is I want to make my own - I dont need all the stuff on XDA Special 1.2 ROM.
I tried also Siemens and Rogers, but have problems with them...
Any suggestion?
Thanks a lot..
Where is your problem with 4.10.12?
Stefan
Related
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
Having problems with Radio Version 4.21 from England, ie the phone will not work (I am in Australia). The phone was working OK until I performed the upgrade
It has been suggested that I install Radio Version 6.12 from T-mobile and I have downloaded the file from Yorch, this comes up as an nbf file and I wonder if I should flash it as I can not find RSUupgrade.exe. Any suggestions ?
Chris
You downloaded the wrong file go back to Yorch's site and look under Upgrades and download "USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00".
HTH
dont Australia use 900/1800 like europe ?
if that is the case the us RSU would ruin the phone even more
Rudegar said:
don't Australia use 900/1800 like Europe ?
if that is the case the us RSU would ruin the phone even more
Click to expand...
Click to collapse
You know thats what I thought until I received the below PM:
-------
Radio Stack for Australia
Wed Nov 12, 2003 13:10
Hello Qman,
Thank you for your reply! But great news here as I have managed to get my RSU version to work in Australia.
My carrier is Optus and SIM card is fine.
Basically by trying most RSU versions I wasn’t able to get the phone to work. Funny thing is I tried the RSU version for the O2, which is supporting here in Australia but to no avail! I ended up using the new T- Mobile for the US and works like a dream have fully signal as well.
New version is RSU 6.24.
Cheers Erebus,
-------
HTH
Further to my problems I upgraded to the T-mobile 2003 ROM an their latest Radio stack 6.24 and all is working OK.
I had sent the XDA to Melbourne (Australia) to the accredited Service company (Accord) and they had sent it back saying that it was buggered. I had some very helpful advice from Peter and Joe and have everything working fine. Curiously, when I had XDA 1.2 and the T-mobile Radiostack the phone kept crashing after reboot. Since upgrading to T-Mobile 4.00.21 ENG and Radio version 6.24.00 all works well.
I did try to download some Medical software (MIMS) and thisd has proven to be a bit of a problem. The tech dude at MIMS was not too impressed with Pocket-PC 2003
Chris
Great, glad to hear it all worked out ok! 8)
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Biso007 said:
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Click to expand...
Click to collapse
Thats great news on RS 6.24, thanks for the tip!
As far as not being able to change ROM's after upgrading to a T-Mobile WM2003 ROM, it will still work but you must use the SD card boot loader upgrade method.
HTH
Help needed, this morning I flash my XDA with USA T-mobile Latest Radio Stack (Unofficial) but not working for my GSM 900. So I flash it back to O2 Latest Official Radio Stack RU 4.21 but it flash until 83% stop forever. So i do a soft rest. Then my XDA can't boot. Can someone help me out on this method? I'm in Malaysia. Using 900/1800 bandwidth.
Hi ...
If you have taken SD backup before upgrading, then go for bootloader menu, press Calendar button, and turn off the Radio part. Try to flash your XDA back to the original ROM and RSU, and then perform a hard reset.
In case you didn't, try the Qtek offical RSU 3.25 from http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific. It works good for Asian operators.
Good luck
Problem FIXED... Thanks for the big help.
Hello there!
I need help understanding how upgrading works from ppc2002 to wm2k3. Is RUU and RSU related? I mean when you upgrade your RUU, do you automatically upgrade your RSU? Also, I have a Siemens SX56, but for some reason, Siemens is not giving the upgrade anymore. Is there any other place I can get that upgrade, or I can use any other phone upgrade? Also, this Kitchen Rom thing'e has been making me curious. Just wanna know what that is? If you guys can answer these questions for me, I will be very appreciated by me and by others who read this thread :mrgreen:
RUU and RSU can be upgrade through one exe file from the operators but it's NOT recommended to touch the RSU as long as it's working.
You can cook your own ROM here http://lumpistefan.dyndns.org/
Got It!
Thanx for your help! Really Appreciate it! I have cooked my SX-56 with A.30.09 ENG. It works perfect with no errors and no memory leaks. I'm Lovin' It! I like the newer version!
-Tariq
congratulations!! ... when you don't like the sound bug in A30.09 .. try 4.01.16
Actually the Tmobile 4.01.16 rom came out to be better than the AT&T A30.09 rom. I actually have a Siemens SX56 that AT&T sells but my service is from T-Mobile. Before what ever Rom I had, Internet Explorer and MSN Messenger never worked with my T-Mobile Wap Service. But after installing the T-Mobile rom, both the internet explorer and msn messenger are working. The speed is kind of slow but they work. :lol:
Dear all,
This is the latest upgrade for the Wallaby device XDA I (since there will be no WM2003SE supported anymore)
The ROM version is A.30.09 ENG Siemens
Special thanks to kucuso (http://forum.xda-developers.com/profile.php?mode=viewprofile&u=15393)
he sent me the ROM file so I can upload it to my server
Thanks kucuso
The file contains the ORIGINAL A.30.09 along with the correct RADIO upgrade :wink:
Download it from here:
http://64.41.101.116/SX56_WM2003_Update.exe
CHEEEEEEEEERS :lol:
is it any progress if i upgrade my 4.01.12 ENG (asia) ROM using this ROM.
Or its just for the SX56 Siemens only ?
The ROM version is A.30.09 ENG Siemens
Thank you for your input, but.... is this the not same Rom that is already for some time available in Lumpistefan's beautiful kitchen???
searose said:
The ROM version is A.30.09 ENG Siemens
Thank you for your input, but.... is this the not same Rom that is already for some time available in Lumpistefan's beautiful kitchen???
Click to expand...
Click to collapse
Should be the same one. But it is the original file, and it includes the Radio stack. (that is useless for 900/1800 MHz devices....)
Stefan
ezzkht said:
Dear all,
This is the latest upgrade for the Wallaby device XDA I (since there will be no WM2003SE supported anymore)
The ROM version is A.30.09 ENG Siemens
Click to expand...
Click to collapse
It is so old for year 2005!
All of us have this version in early of 2004! it was on Siemens website.
Happy New year !
cgigate I know its too old, but its the original Siemens A.30.09 ROM, which is NO LONGER available on Siemens website !!!!
I consider this ROM is much better than the T-Mobile one's, since it has very few bugs compared to T-Mobile's ROM
and since there is no WM2003SE for XDA ,, then this ROM is the latest for this device!
Sorry guys if I did repeat myself
uncompatible version
i downloaded the file and while trying to upgrade it gave me an error that the model is incompatible.
if i try to flash it will it work?
Is this PWA10B1 only (The ROM, i know that the radio wont work)?
Hi Guys,
does anyone have a WM6 english ROM for the wizard yet ? I dont seem to be having much joy trying to find one.
much apprecieted.
Andy.
sorry guys, i have one i found - my mistake for being ignorant lol.
i need to update IPL and SPL to V2 .xx for both. how do i go about doing that ? and tutorials and files would be apprecieted
thanx
to upgrade to 2.xx, look for the official t-mobile usa 2.26 rom and flash your rom with it. after that you can move to wm6. just make sure that you're phone has been cid unlocked before you start the whole process.