Hi ya fellas.
I upgraded my XDA 02 UK pda to 4.00.05 and am fairly happy with its stability. A few probs with the backlight going off, but nothing much really. Windows Media 2003 is class.... encoding films with windows media codec 9 is a joy and they work every time...no codec conflictions, cache settings etc, and the quality is cool.
However, i wish to get a plain (i.e. No added cooked programs) ROM.
I could use Yorchs kitchen to cook up a plain 4.00.05 ROM again, but would rather give 4.0.0.16 ago. It's labled as a T-Mobile USA rom... I however have a UK o2 model xda. If i download the GSM 800/1800 changer utility with it, should it work ok?
Also, will this ROM update my radio stack. I'm currently running 4.21 (the official latest update for o2 uk xda's)... i dont mind if it does update it, but compatability wise, what odds am i running of it working ok?
Ive got an SD reader/writer and have a backup of my old rom just in case i need to go back via bootloader mode.
Thanks for listening
You XDA-Developers are good people (if a little to smart for my likeing
Tony Kett.
probably none since you're only updating ROM and not radio stack.
the cleanest method is obviously using the SD.
btw ... can we have your ROM to look at ?
Thanks
Decebal
my Rom (4.00.05) is just the one thats on the yorch site (with extra apps etc).
>probably none since you're only updating ROM and not radio stack.
- So if i update to 4.00.16 from yorch's site, theres no Radio stack upgrade? and the t-mobile USA version of this 4.00.16 (thats presented on the site) will only update my OS?
http://www.yorch.net/ - if you didnt know btw.
And a bloody good site it is.
So any other O2 UK XDA users upgraded to 4.00.16 or above? (4.00.21)?
I know your out there :!:
updating to v4.00.16 in the uk on a uk device will make you loose the ability to use orange/one2one in the xda as 1800mhz will be replaced with a none working 1900mhz
meaing your phone will have a 1800/900mhz radio but 1900/900mhz software which cant control the radio properly.
use v4.00.05 or v4.00.11(best option) so that you can use all uk networks.
4.00.11 ?
where can we get 4.00.11 ?
the rom kitchens :|
th 4.0.0.11 rom is not available on Yorch Kitchen.
It was on Jeff's Kitchen but the site is down.
Could some one upload the rom 4.0.0.11 on a server to share??
regards,
Yann
gazzaman2k... exactly the answer i was looking for. Cheers Mate.
Now to find a 4.00.11 Rom
Your right, yorch doesnt have that one. Anyone fancy hosting it.... or if possible, email me it at [email protected]
Cheers People,
Tony
So I take it that its not possible to change the 1900/900 to 1800/900 on those newer t-mobile roms (4.0016 & above)? No changer utility? Cant do it in the bootloader :?:
Dammit.
Just out of curiosity, what is the latest unofficial radio stack that people in the UK are using.
The 4.21 official one has been out for quite a while now, but ive seen no unofficial updates to this :?:
Tony
Ajektt, ther is an official update to the 4.21 Radio Stack it's the 4.21.X1
I have it installed, I don't see mutch difference, maybe a better signal mesure.
Doese some one have the 4.00.11 Rom?? I could host it if some one sends it.
Yann
actually with 4.00.21 comes 6.24.00 RSU.
Who wants it ... pm me ... or you can find it at yorch's site.
I need the 4.00.11 too.
Decebal
decebal, we are talking about o2 uk xda compatible radio stacks and os.
4.00.21 and 6.24 RSU Uses 1900/900 GSM ranges, not 1800/900 from what i've been told above in the forum.
Tony
will people pack it in emailing me for v4.00.11 yeah i have it but its cooked especially for my xda meaning the ecurity rom was cooked also :evil: if i had a plain version id be happy to share but as i dont i wont share the version i got as the rom contains my name+details and phone numbers ect.... hence why i havent uploaded it to my webspace and shared :shock:
Thank you gazzaman2k!! We understand you can't share your cooked version.
Maybe Jeff still hase in his archive an uncooked 4.00.11 version of the rom?
Could Yorch include it in his kitchen??
Dose some one has a uncooked version or a cooked version of the 4.00.11 rom with out the security option?
fair enough gazza 8)
We need to harass Yorch to get it up on his superb kitchen. I think we have our work cut out though, because he's getting requests left, right and centre for things on there, which is pretty harsh on him (and his team)
If anyone does manage to get the nbf file, so i can dump it in an .exe install that would be great
for all those concerned about the ROMs on Yorch.net:
Well, for those who know me know that I am about to get married in 2 months, and I just moved with my fiancee to a new apartment. Before moving, I sold EVERYTHING, that includes my 3 desktops pc (including my main PC), and my desk. Since my the new apt, is not that big, I chose not to buy me a desktop, but a laptop, by the way, the laptop that I just bought is the HP pavillion zd7000 series custom made for me :wink: , 3.06ghz of sheer power....arhhh, arhhhh, arhhh <----[trying to imitate Tim Allen]
Anyway, you problably know what that means, right, I've been without a home PC for the last 2 weeks, and I'm scheduled to recieve my new laptop by next week (hopefully), so no changes to the websites, and no changes, really, if you can get smart people to figure out the changes for me, I'm sure I could do them online or from my work computer, but in the meanwhile, I can't do anything......so stop harrasing me with the 4.00.11 rom already! 8) .
hahaha
Consider the harrisment stopped.
Enjoy your move... i moved 2 weeks ago and im still aching
Tony
ajkett said:
Now to find a 4.00.11 Rom
Click to expand...
Click to collapse
If anyone can host the 4.00.11 Rom, i can send it via Email.
Got it in nb1 format, so it should work.
Played few weeks ago little bit with the kitchen, but didn´t get it really working. Maybe because my computer is too slow.
Regards
Stefan
can we get the 4.00.11 plain rom out of the nb1 file (nbf?)?
If so we should then be able to cook another rom on yorch's site (i.e. a 4.00.05 one), build it as an .exe. Then once we have the exe, we should be able to drop the 4.00.11 file in to replace the 4.00.05 one that we cooked...no?
But can u extract stuff from nb1's?
Having problems with Radio Version 4.21 from England, ie the phone will not work (I am in Australia). The phone was working OK until I performed the upgrade
It has been suggested that I install Radio Version 6.12 from T-mobile and I have downloaded the file from Yorch, this comes up as an nbf file and I wonder if I should flash it as I can not find RSUupgrade.exe. Any suggestions ?
Chris
You downloaded the wrong file go back to Yorch's site and look under Upgrades and download "USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00".
HTH
dont Australia use 900/1800 like europe ?
if that is the case the us RSU would ruin the phone even more
Rudegar said:
don't Australia use 900/1800 like Europe ?
if that is the case the us RSU would ruin the phone even more
Click to expand...
Click to collapse
You know thats what I thought until I received the below PM:
-------
Radio Stack for Australia
Wed Nov 12, 2003 13:10
Hello Qman,
Thank you for your reply! But great news here as I have managed to get my RSU version to work in Australia.
My carrier is Optus and SIM card is fine.
Basically by trying most RSU versions I wasn’t able to get the phone to work. Funny thing is I tried the RSU version for the O2, which is supporting here in Australia but to no avail! I ended up using the new T- Mobile for the US and works like a dream have fully signal as well.
New version is RSU 6.24.
Cheers Erebus,
-------
HTH
Further to my problems I upgraded to the T-mobile 2003 ROM an their latest Radio stack 6.24 and all is working OK.
I had sent the XDA to Melbourne (Australia) to the accredited Service company (Accord) and they had sent it back saying that it was buggered. I had some very helpful advice from Peter and Joe and have everything working fine. Curiously, when I had XDA 1.2 and the T-mobile Radiostack the phone kept crashing after reboot. Since upgrading to T-Mobile 4.00.21 ENG and Radio version 6.24.00 all works well.
I did try to download some Medical software (MIMS) and thisd has proven to be a bit of a problem. The tech dude at MIMS was not too impressed with Pocket-PC 2003
Chris
Great, glad to hear it all worked out ok! 8)
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Biso007 said:
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Click to expand...
Click to collapse
Thats great news on RS 6.24, thanks for the tip!
As far as not being able to change ROM's after upgrading to a T-Mobile WM2003 ROM, it will still work but you must use the SD card boot loader upgrade method.
HTH
Help needed, this morning I flash my XDA with USA T-mobile Latest Radio Stack (Unofficial) but not working for my GSM 900. So I flash it back to O2 Latest Official Radio Stack RU 4.21 but it flash until 83% stop forever. So i do a soft rest. Then my XDA can't boot. Can someone help me out on this method? I'm in Malaysia. Using 900/1800 bandwidth.
Hi ...
If you have taken SD backup before upgrading, then go for bootloader menu, press Calendar button, and turn off the Radio part. Try to flash your XDA back to the original ROM and RSU, and then perform a hard reset.
In case you didn't, try the Qtek offical RSU 3.25 from http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific. It works good for Asian operators.
Good luck
Problem FIXED... Thanks for the big help.
I recently purchased an AT&T SX56 and had it unlocked so that I can use it with T-Mobile service. It works great but it still has the old AT&T software on it Pocket PC 2002. I would like to upgrade to PPC 2003 which is available on the T-Mobile site, but I am concerned that flashing the device with T-mobile software will kill it. Has anyone had an experience with this? Will it work?? I can d-load the PPC 2003 from siemens for AT&T but I would rather have T-mobile.
Download it but only flash the ce rom part of it, dont flash the radio if you have a good working phone already, there is nothing there to damage your phone, people on this site have used roms from everywhere without problems, it is better to use the sd method for flashing using xdatools.
I tried the t mobile upgrade
but it told me my rom version was not compatible and aborted the upgrade. I have an att sx-56 that I unlocked by loading the special rom 3.17 ENG. So I'm running on that rom until I spot the next plan on here.
This rom is cool but can anyone tell me how to get the buttons to work when the phone is off again? Also the calendar language is not english any idea on where to set that?
Thanks love this site and the great people on here!
Scott
Use the kitchen at http://xda.weblink.net/ to cook a TMO 4.01.16 ROM and use the SD card method to over come the version verification.
Finished... for now anyway
Did as suggested above and then used t-mobile released version to upgrade radio... Now have the official t-mobile version of OS ROM and Radio. I miss the old special edition rom already!
Thanks everyone!
Scott
Hi,
I just received my SX56 two days ago. I have T-Mobile USA service. I'm trying to figure out the Windows Mobile 2003 upgrades and all that. I found the ROM cook site. So, from what I understand, I can cook the ROM from the site, download it and run it to upgrade my SX56, right? I will not need to do anything else. Everything's included in the ROM downloaded from the site? Also, what version should I update to? A.30.09 or 4.01.16 or something else? Please help!
Also, is there a way to have Bluetooth enabled in SX56 or is it a hardware restriction?
Thank you.
for now i would stick with what you got
and no a rom change could not make it do bluetooth
not even make it work with sdIo Bluetooth cards
I have used PPC2003 before and I have bought few applications that only work with Windows Mobile 2003. That's the reason why I want to upgrade SX56 to 2003. Could someone please guide me to the correct version number for T-Mobile? Thank you.
The 4.01.16 is quite good and stable. (does not have the audio bug).
Pierre
Ps: There's also the SD Erasure!!! buggy WM2003
Quick question for all you pros out there. I just purchased the att version of the siemens sx56. Will receive in mail shortly. I want to upgrade to wm2003. As this is the 900/1900 verision, is it ok to use the qtek Rom 4.02.04. From what I understand the qtek 1010 is a 900/1800. Will this cause any problems?
Also is the t-mobile rom 4.01.16 any better than qtek rom?
Selecting any ROM causes no difference to the radiostack of the device. So you could take any ROM you want.
Selecting the ROM depends a little bit on the way you want to use the device.
The T-Mobile ROMs often have the Problem of reflashing the device. My personal
favorite is the 4.01.12
Stefan
Thanks for the quick reply. I will be using the internet a lot primarily through gprs and just want a stable Rom that wont hang or give me crazy problems.
What exactly about the 4.01.12 rom do you like over the others available?
I like the wmodem application of the ROM, also reflashing is easy possible.
And it´s one of the ROM´s that was nearly official announces by o2...
Stefan