Database Users

Camera Problem

Well I just got my JasJar and when I press the camera the app comes up and then nothing but a black screen. Is there any software update out there? The camera that is on the screen works but not the one on the back.
Jr...

Indentical Problem with XDA EXEC CAMERA
Dear Sir:
I am writing from Brazil. I have the same problem with my XDA Exec Camera.
I tried 3 diferent rom update, and nothing appear, like your.
Did you already found the solution ?
Is a hardware problem ?
Can I solve myself ?
Kind Regards,
Carlos Eduardo Pacheco

just a stupid question but... do you have removed any possible cover or case from the focus?? just in case..

jrinternational said:
Well I just got my JasJar and when I press the camera the app comes up and then nothing but a black screen. Is there any software update out there? The camera that is on the screen works but not the one on the back.
Jr...
Click to expand...
Click to collapse
I am having the samem problem. Is there anything I can download to correct this?

Nothing in the way of the screen.
I have not found a solution to the camera problem. There is nothing in the way of the lens. I have not taken the phone apart to see if maybe a cable is unplugged or such. I really do not think it would be that simple anyway. Once I buy my next phone I will try it out but for now I just wait to see if a good ROM might fix the problem.

In my jasjar cam goes almost fine, but only with 640x480. If configure largest not take pics :evil:

spv m3100 and Camera problems

Hallo to all!! I have a problem with the front (smaller) camera of my SPV M 3100: doesn't work!!! during a videocall I can receive the images but can't send the mine! I tried with Coolcamera to switch to the frontal camera, but the screen is "black"! I changed different ROM with no news! I think that is broken!!! is it possible that? should I change the camera? are there other driver for that? PLEASE help me!
thanks...

Montakzz said:
Hallo to all!! I have a problem with the front (smaller) camera of my SPV M 3100: doesn't work!!! during a videocall I can receive the images but can't send the mine! I tried with Coolcamera to switch to the frontal camera, but the screen is "black"! I changed different ROM with no news! I think that is broken!!! is it possible that? should I change the camera? are there other driver for that? PLEASE help me!
thanks...
Click to expand...
Click to collapse
If it's under warranty have it checked/repaired. It may be faulty or the connector may be loose. The danger in replacing the camera yourself is that it may not be the camera but a circuit board fault. If you do not have a warranty and are technically minded I can give a link for changing out or checking connection of the front camera.
Mike

thanks Mike; can I have that link please? where can I buy a new cam?
many thanks

Montakzz said:
thanks Mike; can I have that link please? where can I buy a new cam?
many thanks
Click to expand...
Click to collapse
Here's a few links:
http://www.howardforums.com/showpost.php?p=9119842&postcount=1
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
http://michael-channon.spaces.live.com
I don't know of a source for the camera off-hand but I'll do some checking.
Mike

I have the same problem on my HTC TyTN. Videocalls don't seem to be working anymore (they used to). I've never updated the ROM.
What's odd is that I can't use any of the 2 cameras for videocalls eventhough the main camera works when it comes to taking pictures or making videos.
(I haven't tested the sensor camera since there is no possibility to use it outside of videocalls).
I would think my problem was software related.....
Any idea to fix this?

superfred said:
I have the same problem on my HTC TyTN. Videocalls don't seem to be working anymore (they used to). I've never updated the ROM.
What's odd is that I can't use any of the 2 cameras for videocalls eventhough the main camera works when it comes to taking pictures or making videos.
(I haven't tested the sensor camera since there is no possibility to use it outside of videocalls).
I would think my problem was software related.....
Any idea to fix this?
Click to expand...
Click to collapse
So far as I'm aware you can only use front cam for video calls. Why you can't make video calls anymore could be troublesome to track down. I suppose a hard reset would be going too far?? (got any full backups? - should have and then these issues are easily solved)
It sounds like the main camera is working normally. The front camera can be used as a regular camera or video recorder and even a web cam. There are a few applications available from Ateksoft that can get these things working for you. The software is not free although they may still have trial versions available:
Coolcamera: http://www.ateksoft.com/
This will also let you know if there are problems with the front camera.
Mike

Thanks for the info!
I've just installed Webcamera trial version. It works with the main camera, however if I choose the front camera, nothings happens (the application seems to not be able to intialize the front camera as it will hang undefinitely...)
I guess my front camera isn't working properly... That sucks as I can't imagine being without my HTC TyTN if I was to send it for repairs (hopefully I don't make that many videocalls).

superfred said:
Thanks for the info!
I've just installed Webcamera trial version. It works with the main camera, however if I choose the front camera, nothings happens (the application seems to not be able to intialize the front camera as it will hang undefinitely...)
I guess my front camera isn't working properly... That sucks as I can't imagine being without my HTC TyTN if I was to send it for repairs (hopefully I don't make that many videocalls).
Click to expand...
Click to collapse
Mmm.. that's a pity. paersonally I never make video calls but I would be annoyed if I thought it would not work if and when I choose to. Have you tried a hard reset - I know that can be a big hassle if you don't keep full backups but still it would confirm (more or less!) whether it's a hardware fault or not.
Mike

like i sow in other topic this is common problem for many users (within me) , i expect it to be something else than hardware problem ...

same problem here!
Any solutions?

[Q] Problem with microphone

Good day,
I just have bought an Motorola Bravo phone of the ebay and it has one strange issue.
When I call to someone they can't hear me, but if I turn on speaker, they hear me fine.
What could be the cause of the problem ? I have dissasembled the phone and saw that the microphone is not replacable ( it is soldered to the mainboard )
Can you guys help me ? Thanks.
Also the android version is 2.3.4 with non working camera (dunno the rom name)

Did you try a factory reset?
I would not bother flashing stock since doing that would give the seller grounds to deny your refund claim
Just contact the seller and return the phone. I think ebay covers all your purchases including shipping charges.

Too late, I just have flashed stock 2.2.1 rom with RSD Lite and the problem is still there.
But I do not get why there is totally no voice when I speak but when I turn on speaker everything is fine. Is it really hardware fault ?
/update
Tried factory reset, nothing.
Also after reflashing to stock rom I did notice that the kernel version is still the same. Maybe thats the cause of the fault ? before there was strange chinese rom in my bravo, I thouht it messed up microphone and stuff

If you flashed a stock 2.2.1 and it didn't fix it then I think it would have to be a hardware problem... unfortunately it sounds like someone tried to unload a messed up phone on you, hope you didn't pay to much for it.
Sent from my MB520 using XDA App

FanDroid09 said:
If you flashed a stock 2.2.1 and it didn't fix it then I think it would have to be a hardware problem... unfortunately it sounds like someone tried to unload a messed up phone on you, hope you didn't pay to much for it.
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
But one thing I do not understand, clearly there is only one microphone in this phone, I have disassembled it, but one sure thing I can not understand, WHY MIC WORKS WHEN THE SPEAKER PHONE FUNCTION IS TURNED ON DURING THE CALL ? It works flawlessly, but if you turn in off, no sound at all at the other end.
What part of the phone software is responsible for hardware ? Is it Kernel ?
Thanks for answers guys.

I agree that its really weird... I honestly am not the best person to advise you on this particular subject I don't know much about the hardware on this phone besides specs... so if you don't get any good help on this forum (we have low dev activity) you could try a more general and active forum.
Sent from my MB520 using XDA App

AgniusLT said:
But one thing I do not understand, clearly there is only one microphone in this phone, I have disassembled it, but one sure thing I can not understand, WHY MIC WORKS WHEN THE SPEAKER PHONE FUNCTION IS TURNED ON DURING THE CALL ? It works flawlessly, but if you turn in off, no sound at all at the other end.
What part of the phone software is responsible for hardware ? Is it Kernel ?
Thanks for answers guys.
Click to expand...
Click to collapse
Did you solve your problem?
I have a similar problem, I can be heard good only when I speak over bluetooth.

Hey mate.
Finally I found out that Motorola Bravo has TWO microphones, one for calls, other is on the back near the camera and it is used for video recording/speaker during call.
So I think I have faulty microphone. But not 100% sure. Still dunno which part of software drives hardware, specifically microphones.

Anyways I receive no answers to this problem. So generally I think my front microphone does not work but the rear one works perfectly.
So maybe there is a way to change the usage of the microphone during the call ?
That the rear microphone would be used and not the front one.
Cause some recording apps let me do this like "TapeMachine Recorder"

can't connect to camera.

my lg g2 can't connect to camera and hence force crashes, the front camera works. i replaced the camera by buying a new one, but the issue is still present,
i've noticed something though, when i installed a torch app, the following message comes up - "Due to limitation of your hardware or OS, your device does not support LED Cam light, We will light up your screen at maximum instead."
It also says - "Your LED is being used by another application. We will light up your screen instead."
Any help would be greatly appreciated.
cheers

Try reflash your phone to stock .kdz might help.

kopter3161 said:
Try reflash your phone to stock .kdz might help.
Click to expand...
Click to collapse
thanks the issue is still present in stock kdz
and the same messages pop up with the torch app.

Also as a note, the rear camera also does not work in safe mode.

salespalace said:
Also as a note, the rear camera also does not work in safe mode.
Click to expand...
Click to collapse
These would probably a hardware issue then. Since nothing could fix it by meant of software. Did you get a genuine camera module for the replacement? Im afraid its not compatible or at least the module itself is broken. If you happen to consider buying another camera module i would suggest getting G3 camera module as it 100 percent compatible with G2 and also it had a little better spec.

salespalace said:
my lg g2 can't connect to camera and hence force crashes, the front camera works. i replaced the camera by buying a new one, but the issue is still present,
i've noticed something though, when i installed a torch app, the following message comes up - "Due to limitation of your hardware or OS, your device does not support LED Cam light, We will light up your screen at maximum instead."
It also says - "Your LED is being used by another application. We will light up your screen instead."
Any help would be greatly appreciated.
cheers
Click to expand...
Click to collapse
Have you tried running a test with 3845#*802#?

kopter3161 said:
These would probably a hardware issue then. Since nothing could fix it by meant of software. Did you get a genuine camera module for the replacement? Im afraid its not compatible or at least the module itself is broken. If you happen to consider buying another camera module i would suggest getting G3 camera module as it 100 percent compatible with G2 and also it had a little better spec.
Click to expand...
Click to collapse
could it be that the replacement camera is faulty? hmmm, i'm not sure. the one i got was genuine though. so im not, i fell inclined to believe it may be the camera flash thats causing these issues.

tangnt said:
Have you tried running a test with 3845#*802#?
Click to expand...
Click to collapse
what specific test should i carry out? if you could be kind enough to inform me, it'd be great.

salespalace said:
could it be that the replacement camera is faulty? hmmm, i'm not sure. the one i got was genuine though. so im not, i fell inclined to believe it may be the camera flash thats causing these issues.
Click to expand...
Click to collapse
Sometimes even a perfectly careful assembly could mess up something. Maybe its just a loose cable or shorting something. It could be.

Any solution to it ??? I also have same issue? @salespalace

[email protected] said:
Any solution to it ??? I also have same issue? @salespalace
Click to expand...
Click to collapse
Turned out to be a hardware issue - despite replacing with a new camera port, still didn't work, - which told me there was an issue with the motherboard. sold the phone off. so no real solution. sorry.

"Camera Busy" error after update

Hello, I just bought a Moto X Play XT1563 used that has the camera problem.
When you open the camera app it returns the error "Camera busy. Can not start the camera. If this happens again, restart your phone."
The former owner of the handset, informed me that this happened after he upgraded the system.
I already took a technical assistance, the rear camera was changed but nothing solved.
I've tried all the tutorials and tips I found on the internet.
I'm still hoping to be a problem with the system.
Can anyone give me a light, or idea of what that might be?
I'm attaching the dmesg.log (kernel log, I'm currently with CoffeeKernel v2) which is returning some errors on the part of the camera.
I thank you.
Sorry, message has been translated.

same problem here.. anyone knows how to solve this?

Did u ever edited build.prop for any reason??if yes,just remove the lines u have added or restore the original build.prop file.

kos25k said:
Did u ever edited build.prop for any reason??if yes,just remove the lines u have added or restore the original build.prop file.
Click to expand...
Click to collapse
I've tried new and old ROMs, downgraded to 5.1.1 and went back to 6.0.1. But to no avail.

VictorLestat said:
same problem here.. anyone knows how to solve this?
Click to expand...
Click to collapse
Managed to solve?

no body? ;(

Nicolas Alves said:
no body? ;(
Click to expand...
Click to collapse
I've the same problem, when I try open the camera apk says "camera is busy), I changed the main camera but not fix the problem, so yesterday try to remove the front camera and now works only with the main. After that I replacing the front camera but after change only works the front, I've not a idea what happen with the phone but can't work with the both cameras.
I've stock firmware not rooted.

lipebu said:
I've the same problem, when I try open the camera apk says "camera is busy), I changed the main camera but not fix the problem, so yesterday try to remove the front camera and now works only with the main. After that I replacing the front camera but after change only works the front, I've not a idea what happen with the phone but can't work with the both cameras.
I've stock firmware not rooted.
Click to expand...
Click to collapse
After some test I think the problem is something with the front camera, when I mount the front camera sometimes work but not ever, in fact when I remove the front camera the main camera allways work. I verified the grounds but I not found nothing.
Another option it's a problem with the firmware.

lipebu said:
After some test I think the problem is something with the front camera, when I mount the front camera sometimes work but not ever, in fact when I remove the front camera the main camera allways work. I verified the grounds but I not found nothing.
Another option it's a problem with the firmware.
Click to expand...
Click to collapse
When you removed the front, did the flash (led) work again?
Mine currently does not work at all, not even the flashlight.

Maybe a solution
Guys, I've found that the problem in my phone was the flat of flash. It was a little to far from contacts . So I removed the clue in it's back and added a little piece of plastic. And assembled the phone again. It worked just like a charm.
I hope it helps you. (Sorry by the bad English)

lipebu said:
After some test I think the problem is something with the front camera, when I mount the front camera sometimes work but not ever, in fact when I remove the front camera the main camera allways work. I verified the grounds but I not found nothing.
Another option it's a problem with the firmware.
Click to expand...
Click to collapse
How do you remove one camera or the other? I rather have only the main camera working, I don't mind the front camera.

still work's? im having the same problem. could it be the middle frame is broken or someting? maybe bad connectors.
This one
https://ae01.alicdn.com/kf/HTB1.cpH...b-Moto-b-font-font-b-X-b-font-font-b-Play.jpg

I just disassembled the phone, disconnected back camera cables and reconnected againg (remember to pull the locker down after reconnect) , I needed to do it 2 times because the first attempt did'nt work. YOu can try the camera witthout put the screws. Reassembled and now no errors!

erickdeoliveiraleal said:
I just disassembled the phone, disconnected back camera cables and reconnected againg (remember to pull the locker down after reconnect) , I needed to do it 2 times because the first attempt did'nt work. YOu can try the camera witthout put the screws. Reassembled and now no errors!
Click to expand...
Click to collapse
Just that? Because I tried changing my back camera but it didn't fix. Your camera still works?

justi153 said:
still work's? im having the same problem. could it be the middle frame is broken or someting? maybe bad connectors.
Click to expand...
Click to collapse
I've done a little mod and resolved my problem. The led's connectors were not touching correctly the connectors of the board.
I corrected it by sticking a little piece of plastic below the connectors of "middle frame", so it became a little popped out and solved the problem.
I hope have helped you guys.

josueoliveira said:
I've done a little mod and resolved my problem. The led's connectors were not touching correctly the connectors of the board.
I corrected it by sticking a little piece of plastic below the connectors of "middle frame", so it became a little popped out and solved the problem.
I hope have helped you guys.
Click to expand...
Click to collapse
this one?

justi153 said:
this one?
Click to expand...
Click to collapse
No. The blue one. I've lifted a little the connectors and put a plastic piece below it.
The first time the piece, got loose, the second time I used a dual face tape, to put it together.

josueoliveira said:
No. The blue one. I've lifted a little the connectors and put a plastic piece below it.
The first time the piece, got loose, the second time I used a dual face tape, to put it together.
Click to expand...
Click to collapse
im going to try this on the weekend and tell u if it works, Thanks!!

Hi Guys,
I too have the same issue. I have a XT1562 and it started post update to nougat stock. Than I moved to lineage 14.1 hoping that it will fix the issue but all in vein. Have tried all the methods on the internet. If its hardware issue and can you show in pics how to fix it.

Tried and worked
josueoliveira said:
Guys, I've found that the problem in my phone was the flat of flash. It was a little to far from contacts . So I removed the clue in it's back and added a little piece of plastic. And assembled the phone again. It worked just like a charm.
I hope it helps you. (Sorry by the bad English)
Click to expand...
Click to collapse
Hi Thanks for your post... I have pushed the flash and the camera did open... I will disassemble and sit correctly the flash :cyclops: