I'm running my xda-jam under wm 2003. I'm using activesync. 3.8 to synchronise with my outlook. When I connect my jam after booting the pc, it synchronisez normally. But if I unplug my jam during the day and the reconnect it to the pc, I get the message not connected. I have to reboot my computer to be able to synchronize it again.
Any suggestions??
Related
hello all,
After the installation of ActiveSync, i insert the usb cable to laptop and put the Xda II on cradle, the ActiveSync in computer couldn't find any device (Xda II) and i can't setup the partnership, however, my Xda II display the "connected" only for 2 seconds and then interrupt for ever, i have installed the ActiveSync many times and hardreset the XdaII, but it is still not connected, what's wrong with this? :?: :?: :?:
When the xda 2 is first plugged into usb you should get a message on your laptop screen saying device found htc etc, once this is done activesync should see it. Which version of activesync are you using?
I tried the ActiveSync 3.7 and ActiveSync 3.8, the results are same. The laptop can find the USB, but the ActiveSync can't find the XdaII.
Idea
I am assuming Active Sync works on other computers?
If you are using XP,
Make sure the device is plugged in.
Open up task manager, (Ctr + Alt + Del), go to processes and end task on WCESMgr.exe and or wcescomm.exe.
Right click on My Computer, select Manage. Expand Device manager, Windows CE USB Devices, right click on PocketPC USB Sync and Uninstall, click Yes.
If you see any devices with an explanation point or marked Red, Uninstall them too.
Unplug your device.
Open up Active Sync, under the settings, make sure USB is checked.
Plug in your device.
I have seen this happen if windows did not configure the device properly at first.
As a thank you for my time, send me naked photos of your wife!!! KIDDING!!!! :shock:
Thanks for your help, i have done this by following what you said, but it is still not connected. When the laptop find the Device USB first time, the XDAII just display the "connected" for 1&2 seconds. I click the "Error" on XDAII, which is Synchronize with Server, then it displays:
The connection failed due to mising server information or user credentials. Tap Options, and then the Server tab to verify that your server name is correct. Then, tap'Optaions..." to verrify that your user credentials are correct and try again.
I haven't changed ther Server Synchronization in "Option", and my laptop doesn't need any user name and password to logon.
What's wrong with this? How to set up the "Option" in XDAII?
DUDE!!!
It is hella confusing.. BUT... You do not use the Server setting.
I use the Server setting but I have my own Exchange server 2003 and using Exchange Server 2003 Mobile Services, I have my Contacts, Calendar and Inbox always up to date via the Internet, (I have unlimited Internet through T-Mobile for $19 a month).
You need only to use the PC synchronization. Open Active sync, Tools, Options, Options again and check to make sure it is checked and USB is selected, OK, make sure the other two are "Ticked" as well, OK.. Then try.
This Time I only want naked photos of your DOG!!! :lol: :shock:
There should be some problems with laptop, because everthing is ok when i connect my XDA with other PCs. I can't find what problem is with my laptop. It is running Windows XP professional edition.
Darge, this isnt going to sound very logical, but if you have more than one usb port, please try the other port, I have had similar problems with activesync whic have been resolved by doing this, dont ask me why because i dont know.
May be should try othe type of connection other than USB. Try using either bluetooth or wifi. May be you should search in the forum regarding connection using bluetooth or wifi.
My Xda and laptop are connected and working very well after i reinstalled the Windows XP for my laptop. It was the stupid and only way what i could do, because i have tried all kinds of solutions which were not useful.
Thanks a lot for your advice and help anyway. 8)
Before I set up push email my phone synced to the exchange server fine via USB, but whenever I sync my phone to my pc via USB now it syncs to the exchange server via GPRS not USB and I get an error on both pc and phone saying it is unable to sync to the server, I have tried disabling push and GPRS but still my phone won't sync to the exchange server via USB, this is reall annoying I can sync via GPRS but not USB, I don't mind this but the error message on the pc and phone I get each time just bugs me, anyone else have this problem and know how to sort it out...?..
check to see if you have the ce tificate installed. For the push to work you need exchange sp2 installed and security feature pack installed on PDA
what certificate adn where do you get it from, the PUSH is workign fine have AKU2 and SP2 i'm talking about syncing via USB are you like blind?, re-read my first post..
browse?
Can your PPC browse Internet sites while connected to your PC via USB?
I was experiencing this very issue for the longest time and the thing that worked for me was changing the connection settings in Activesync on the computer. Here is what I did:
File => Connection Settings => This computer is connected to: The Internet
For some reason, when it was set to Automatic the USB sync would work for a while and then stop altogether. Good luck.
I have a problem with ActiveSync (or with my Qtek 9000, who knows): when I connect the PDA to the PC through USB, the PC detects the PDA, ActiveSync goes into "Connecting" mode, and then.. nothing. It says that it can not connect.
I followed several troubleshooters on the Internet, but the symptoms still remain.
Perhaps it's a software problem on the PDA. I'd love to perform a hard reset, but I must synchronize first (it's been 2 months since I can't synchronize, and I have done quite a bit of appointment and document entry on the PDA).
So.. what should I do?
I can connect the PDA to the Internet through WiFi and GSM 3G. Should I run a backup program, transfer everything to a FTP site, and then hard reset?
If so, which backup program should I use?
Is there anything I can fix on my PC to make it connect to the PDA?
What is your advice?
THANK YOU!
I have exactly the same problem when connecting via a USB cable to my home PC. Connecting to my home pc via bluetooth works fine and connecting to my work pc with a cradle works fine.
I've tried using different USB cables, different USB ports and have two Qtek 9000's with exactly the same problem on the same PC. I've tried re-installing AS 4.1 and 4.2 and both fail to sync with the cable.
Any ideas or advice would be greatly appreciated.
My Qtek 9000 used to connect and sync on this computer. In the last 2 or so months, this hasn't worked. No idea why!
Are any of you using the app "USBSwitch"??
For some reason, ActiveSync is using settings for a serial connection to connect to your PDA. USBSwitch will allow you to set the connection as RNDIS, which will allow you to connect and sync.
You can download it here -- http://forum.parallels.com/thread2743.html
I had the same problem with my Cingular 8125, and then found out that HTC included the USBSwitch app into the latest ROM upgrade. Has been working fine ever since I found it to switch over.
I had similar problems with my Qtek 9100
My problem was my firewall (Sygate personal firewall (SPF)) which did not allow me to connect via USB.
If I turned SPF of it worked.
My current firewall, NVIDIA Firewall, asked me if I wanted to allow the USB connection to my device. When allowed everything works fine.
/joel
Hello everybody,
After to solve the problem with GPRS and multiple connections (CallerID) I have another problem:
My Mails and Calendar are sync from MS Exchange 2003 by GPRS. This is OK, but I want to sync Contacts and Files by PC (USB) and it isn't possible. When I plug the PDA to PC, in sync screen there isn't progress in SyncPC progress bar and nothing happens.
Does anybody know a solution?
I think the problem comes when I updated with a new ROM, but I only suposse it, because I had not Exchange ready to sync by GPRS.
Thanks,
I have just got an Orange SPV M5000 and am having problems getting it to work with activesync. I have tried both 4.2 & 4.5 and with 4.5 it will sometimes sync. If I disconect from the PC I have to reboot the PC if I want to resync. Also, when activesync is working, when Outlook syncs with the 5000, it says every thing has synced, but the callendar on the 5000 does not update (infact it has no entries)
Everything used to work OK with my old M1000 so I don't know what to do. Anyone got any ideas please. Regards, John
NOW SORTED
the problem was that the later versions of activesync connect via RNDIS TCP/IP rather than the older serial USB. Some PPC's have an icon called Activesync Mode which the 5000 does not have which allows you to change to either setting.
I found a microsoft solution where you install ActiveSyncMode.sa.cab which puts installs that icon so you can change back to USB serial & its all fine now.
NOW SORTED
the problem was that the later versions of activesync connect via RNDIS TCP/IP rather than the older serial USB. Some PPC's have an icon called Activesync Mode which the 5000 does not have which allows you to change to either setting.
I found a microsoft solution where you install ActiveSyncMode.sa.cab which puts installs that icon so you can change back to USB serial & its all fine now.