Where i find Qtek S100 original Splash Screen?
QTEK_SPLASHSCREEN.cab in XDA FTP...
It's the original Qtek S100 Splash Screen?
Memphis said:
QTEK_SPLASHSCREEN.cab in XDA FTP...
It's the original Qtek S100 Splash Screen?
Click to expand...
Click to collapse
No its Qtek's splash screen. I think the original one is the WINDOWS Splash Screen
xcilion said:
Memphis said:
QTEK_SPLASHSCREEN.cab in XDA FTP...
It's the original Qtek S100 Splash Screen?
Click to expand...
Click to collapse
No its Qtek's splash screen. I think the original one is the WINDOWS Splash Screen
Click to expand...
Click to collapse
No the original one from rom 1.01 is the one with the skyline of NY ! i'm sure and it's also in the latest rom 1.12.555
Related
Does anyone have the O2 splash screen for the Magician? I looked in the xda-dev FTP but there are only qtek, imate, and original windows startup splash screens...
I know,
I changed my splash screen from my o2 mini to one of the others and also looked to restore it back to the original. I couldnt find it and ultimatly I had to Backup, hard reset and restore.
bump
okie okie, I'm working on it. 8)
okie done!!!!!!
Here ya go Kai, don't say I never did anything for you. :lol:
doh, I have no idea how to post it to the forum
Anyways, it's located on the FTP under Magician/Splash Screens/O2SPLASHSCREEN.CAB
whtrbt7
could you tell me, how to backup the original splash?
whtrbt7 said:
okie done!!!!!!
Here ya go Kai, don't say I never did anything for you. :lol:
doh, I have no idea how to post it to the forum
Anyways, it's located on the FTP under Magician/Splash Screens/O2SPLASHSCREEN.CAB
Click to expand...
Click to collapse
whtrbt7 to the rescue!! (again) :lol: 8)
cheers. my o2 mini would also like to thank you, she "feels" like an o2 again!! :mrgreen:
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Is any way or program to change Boot Splashs in Polaris? I use to have a Trinity and was possible, surely in this PDA machine also it is. Thanks in advance
v1zca1n0 said:
Is any way or program to change Boot Splashs in Polaris? I use to have a Trinity and was possible, surely in this PDA machine also it is. Thanks in advance
Click to expand...
Click to collapse
If you mean the HTC boot animation, yes it can be changed:
Custom moving theme in boot
heeleven said:
If you mean the HTC boot animation, yes it can be changed:
Custom moving theme in boot
Click to expand...
Click to collapse
THKYOU
Similar
Something similar. Is possible change the initial splash. The one with "smart mobility" in black. Thank you again.
http://forum.xda-developers.com/showthread.php?t=367370
Polaris and Touch dual use same tools same way
tom_codon said:
http://forum.xda-developers.com/showthread.php?t=367370
Polaris and Touch dual use same tools same way
Click to expand...
Click to collapse
Thank you tom_condon I´ll use. I think is a good trick for everybody that have a Cruise because the "smart" splash is very ugly.
Hi,
i tried to install the new rom version Open Touch Version 7.1 . Everthing worked perfect until that point were the xda reboots and the screen shows the status bar. It stops after 3% and says that the image files is corrupted.
My first thought was that he was right - so i did the download and installation again - without any change.
I`ve got a XDA Terra, O2 branding.
Sorry 4 bothering u ...
Thanks a lot !
Andi
andi75 said:
Hi,
i tried to install the new rom version Open Touch Version 7.1 . Everthing worked perfect until that point were the xda reboots and the screen shows the status bar. It stops after 3% and says that the image files is corrupted.
My first thought was that he was right - so i did the download and installation again - without any change.
I`ve got a XDA Terra, O2 branding.
Sorry 4 bothering u ...
Thanks a lot !
Andi
Click to expand...
Click to collapse
That rom was built for the htc herald/t-mobile wing. You need to find a rom that was built for your phone.
spacemonkey333 said:
That rom was built for the htc herald/t-mobile wing. You need to find a rom that was built for your phone.
Click to expand...
Click to collapse
XDA Terra is HTC Herald.
um did you Hard-SPL?
follow instructions HERE
kidnamedAlbert said:
XDA Terra is HTC Herald.
um did you Hard-SPL?
follow instructions HERE
Click to expand...
Click to collapse
wow... didn't know that. I feel like an idiot. My bad
its okay
i didnt know until i found out that papamopps had the xda terra.
Thanks a lot !
After hard SPL everthing works Perfect !
Sorry for bothering !
Anyone has the Original boot splash screen as .nbh??
I got the T-Mobile now, and it sucks!
xmoo said:
Anyone has the Original boot splash screen as .nbh??
I got the T-Mobile now, and it sucks!
Click to expand...
Click to collapse
I can get it for you!
Hang on a sec...
EDIT:
Hopefully this is the one.
l3v5y said:
I can get it for you!
Hang on a sec...
EDIT:
Hopefully this is the one.
Click to expand...
Click to collapse
How to install it?using sspl?
djcedric said:
How to install it?using sspl?
Click to expand...
Click to collapse
Yeah... Drop the NBH into the same folder as SSPL and run that... It may not be the right image...
Will try tonight, Thx bro!
l3v5y said:
Yeah... Drop the NBH into the same folder as SSPL and run that... It may not be the right image...
Click to expand...
Click to collapse
ok thanks
Does that mean that a "Change Bootsplash Image/animation" tool is in the works ?
It would be great, to really easily flash a new bootimage/animation.
l3v5y
Thx brother, it worked!
xmoo said:
l3v5y
Thx brother, it worked!
Click to expand...
Click to collapse
l3v5y or xmoo:
when flash this bootscreen is everything reset then?
djcedric said:
l3v5y or xmoo:
when flash this bootscreen is everything reset then?
Click to expand...
Click to collapse
Yes, my phone did preform a HR, but no problems, was already flashing a new rom
xmoo said:
Yes, my phone did preform a HR, but no problems, was already flashing a new rom
Click to expand...
Click to collapse
That means the RUU wasn't patched not to. You can patch it so it doesn't and I'm going to try and make a custom bootscreen package.
What's interesting is the format of the image is different to previous ones.
xmoo said:
Yes, my phone did preform a HR, but no problems, was already flashing a new rom
Click to expand...
Click to collapse
Thanks
l3v5y said:
That means the RUU wasn't patched not to. You can patch it so it doesn't and I'm going to try and make a custom bootscreen package.
What's interesting is the format of the image is different to previous ones.
Click to expand...
Click to collapse
ok then im gonna wait a little
l3v5y said:
I can get it for you!
Hang on a sec...
EDIT:
Hopefully this is the one.
Click to expand...
Click to collapse
Do you know if these can be customised like for the diamond?
MG
Anyone has the T-Mobile boot splash screen as .nbh?
I wanna change the HTC original boot screen to T-Mobile.
I thought the SSPL would only flash the OS....
Anyway, if you want the T-Mobile splashscreen, flash a T-Mobile ROM ^^
MysticGenius said:
Do you know if these can be customised like for the diamond?
MG
Click to expand...
Click to collapse
Bump Bump!! does any one now if they can be customised?
Thanks
MG
splash screen
l3v5y must know exactly what to do a personal slplash screen,I think and I would like to know how. I find a tutorial but for old machine (diamond...) but not for leo.bit I don't have a hard reset
rock_shen said:
Anyone has the T-Mobile boot splash screen as .nbh?
I wanna change the HTC original boot screen to T-Mobile.
Click to expand...
Click to collapse
I want the T-Mobile boot splash too. As someone said why don't we flash T-Mobile Rom instead install the T-Mobile boot splash. I flashed T-Mobile Rom once and I got what I wanted. However, the T-Mobie rom has different signal, I am using AT&T here in U.S.A. and I had a hard time to connect ATT 3G. The system kept asking me to edit the connection.
So, anyone who has the Original T-Mobile boot splash or who can make the T-Mobile boot splash as .nbh or .cab please give it to us.....
Thank you for your kindness.
Original T-Mobile Splash TMOUS Stick Together
I have tested it and this is working the splash is here!
Flash as if you would a ROM and all will work!
Be sure to backup data i think it erased my contacts and whatnot.
@xmoo:
there are two bootscreens.
i made black htc bootscreens
see here
here is the tutorial:
LEO BOOTSPLASH TUTORIAL
edit: tutorial link fixed