Hi,
I have put my M1000 into Bootloader but how do i get it back to normal?
/Jesper
http://forum.xda-developers.com/viewtopic.php?t=23872&highlight=exit+bootloader
It just make the screen darker and then the:
Serial
v 1.02
Comes back.
sounds like the rom is gon then
try flashing it with a rom again
Where can i then find a Orange rom?
JesperRas said:
Where can i then find a Orange rom?
Click to expand...
Click to collapse
Then it's time to open the Wiki and read from there. http://wiki.xda-developers.com/ or use the search, good luck my friend
Related
http://slil.ru/22519272
Well is the moment of truth...i shal install it and let you all know if is any better.
So is this WM2003?
What is this http://slil.ru/22519272
I don't understand this.
Ok, I will use it later.
Regards:
Hank Freid
Not official
I think it is very much official.
how to flash plz.
ke-kiat said:
how to flash plz.
Click to expand...
Click to collapse
this error [264]
Is it useful or not? Can I install it?.........
Anyone know differents between that rom and SP3_RUS_2.2.33.12?
EDIT:
Does not work on my Typhoon. After flash i got only blinking white screen, but bootloader works fine and i back to Aleut ROM.
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
haveri said:
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
Click to expand...
Click to collapse
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
papamopps said:
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
Click to expand...
Click to collapse
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
haveri said:
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
Click to expand...
Click to collapse
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
papamopps said:
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
Click to expand...
Click to collapse
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
haveri said:
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
Click to expand...
Click to collapse
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
papamopps said:
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
OK i'm trying all this flash that bee here
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
OK i have add your mail
Click to expand...
Click to collapse
Are there other methods to flash the rom of my Herald (than the official .exe)?
bayxsonic said:
Are there other methods to flash the rom of my Herald (than the official .exe)?
Click to expand...
Click to collapse
It's not really recommended unless you can find the same ROM that your phone has now on the Herald Wiki (so you can restore your ROM in case you brick your phone).
But if you still want to proceed, there's tons of info already in the forums.
Thank you... I'm been searching for a lot but...
Ok, tomorrow I'll call the Customer Service
bayxsonic said:
Thank you... I'm been searching for a lot but...
Ok, tomorrow I'll call the Customer Service
Click to expand...
Click to collapse
You can flash using Aserg's method.
http://forum.xda-developers.com/showthread.php?t=308891
Also here is another ROM
http://forum.xda-developers.com/showthread.php?t=318962
I got a bricked one by using the pdaviet rom...
bayxsonic said:
I got a bricked one by using the pdaviet rom...
Click to expand...
Click to collapse
I'm sure if you had read those entire two forums your phone would be working right now.
I've read the instructions on bottom of the post:
Extract file, copy ASerg Policies.CAB to PPC and Run it,then reboot driver.
Sync PPC to PC and run 1__UPGRADE_ROM.bat,Wait it 10-15 minutes.
Cheers..!
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Hey i have open touch v7.4 and my wing is Hard-SPLed i was wondering how i would get it back to the original rom because i have to send my phone back to t-mobile thankyou
lol i sent many phone back to tmobile without taking off the Hard spl but illget u a link in a little bit or you can do what im doin and google search it
thainess said:
Hey i have open touch v7.4 and my wing is Hard-SPLed i was wondering how i would get it back to the original rom because i have to send my phone back to t-mobile thankyou
Click to expand...
Click to collapse
original rom?? or un hard spled?? i know how to do both.. just gotta say which one... lol..
i would love to know how to do both please :]
I am also in desperate need of knowing how to do this!
There are plenty of posts regarding this...
One minute search gave me a few different posts that had the answer, this one being the clearest on it by far.
How to remove HardSPL from tmobile wing (Removes both HardSPL and the ROM, obviously.)