The firsttime that I linked the Parrot CK3000 to my M1000 everything was working ok.
But after some phonecalls and and putting the SPV in and out of my Carcomm Car Cradle the bluetooth was "OFF" and there was no red stripe across the BT icon!?
So I switched it on again but the next day....again....BT "OFF"!?!?
After that I swithed it on again I saw that I can't accept "incoming" phonecalls with the Parrot CK3000(buttonpad) but when I call somebody myself the Parrot is working oke!?
What I also saw was that he don't give a pair tone on the moment
that I turn my contact key on.....which he did in the beginning!
Hopefully somebody else has the same experience or solution.
Rom:1.66.00WWE
Radio: 1.10.00
ExtRom: 1.66.171
In this topic somebody has a simlar problem...and as workaround he warm/soft reset his XDA2
http://forum.xda-developers.com/viewtopic.php?t=11285&highlight=ck3000
Related
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
Me, and along with me quite some Parrot BT carkit users seem to have the same problem with the TyTN Bluetooth. The phone syncs, but randomly disconnects, or even worse, just switches off BT.
I have the problem on my Audi MMI integrated BT carkit, but also on my Parrot in the other car. Anyone any idea's to fix?
I used Jetware before to enhance the possibilities of BT on my Qtek 9100 and there everything just worked fine. Seems to be a TyTN problem.
BTW, also have some sticky keys :roll:
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
My bluetooth turns itself off after a few min connected to my parrot car kit? any Clues?
ROM 1.35.255.2
Radio 1.18
which parrot model? I am looking for a bt install kit to go with my vario 2. Tried a motorola HT850, worked ok for about a 1hr test except the voice dial button did not activate the voice recognition on the vario 2. This works ok with my Jabra BT200 earpiece, when its not flat !! Hence why I want an installed unit!
timbouk said:
which parrot model? I am looking for a bt install kit to go with my vario 2. Tried a motorola HT850, worked ok for about a 1hr test except the voice dial button did not activate the voice recognition on the vario 2. This works ok with my Jabra BT200 earpiece, when its not flat !! Hence why I want an installed unit!
Click to expand...
Click to collapse
I recently purchased the Parrot CK3200 from Amazon to go with my Vario II. It took about 10 minutes to install but that would depend upon the connections on the back of your car stereo. It mutes the stereo and uses the car speakers. It seems to work very well but I don't use the voice dialling so can't comment on that bit.
The only issue I occasionally have is if I leave the Vario BT on when I shut it down, it doesn't always pair when I turn it back on. It then needs me to turn BT off and on again in the comms manager in order to work. Its easy enough to tell when this has happened as I don't get the blue flashing light on the Vario.
any chance of you testing the voice dial (and voice control of opening applications etc if you knew you could do that!) through the parrot system?
Is the ck3200 the "advanced" one with the lcd display? What's your rom version etc....
Cheers in advance.
It is the one with the colour LCD display, I'll test the voice dial later on my drive home. I had no idea you could open application with voice commands, I guess perhaps I should read the instructions (only do this when all else fails).
My Vario II is running
ROM vs 1.21.110.3
Radio vs 1.05.05.00
The parrot is using version 2.03d
Update:- I tried the voice dialling earlier and can report the following.
Pressing the voice dial button on the Parrot triggered the Hermes to wait for a voice tag but using the Hermes microphone. As I drive quite a noisy van this was not successful. After setting up voice recognition on the Parrot and recording new voice tags the Parrot worked reliably but only using the voice tags saved on it not the Hermes.
To use the voice tags saved on the Hermes I now have to press the voice dial button on it rather than the Parrot. Not ideal as this does not automatically mute the stereo.
To conclude, the two pair reliably and if you don't mind recording new voice tags for the Parrot then voice dialling works very well. I also really like the way I can beam photos to the Parrot so that when friends call I get their picture on the screen.
same problem
tabackd said:
My bluetooth turns itself off after a few min connected to my parrot car kit? any Clues?
ROM 1.35.255.2
Radio 1.18
Click to expand...
Click to collapse
I have exactly the same problem and I haven´t found solutiont yet. :-(
Bluetooth cutting out on me too
Never had a problem running my Nuvi 660 and Tytn with original ROM. Low and behold, I upgraded to 1.35 with 1.18 radio, and it started cutting out on me. It is driving me up a wall. I am now sorry I upgraded the ROM. I was debating reinstalling 1.04 bootloader and installing 1.21 radio (which I had installed with original Tytn Rom and no bluetooth problem) with 1.35 ROM. Any thoughts here would be appreciated.
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Funky
Here's a fix I used on my old wizard http://forum.xda-developers.com/showthread.php?t=273990 This will keep bluetooth active when in standby,
Props to Funky B for the fix
I own a JasJam I-mate and have a consistent problem with the Bluetooth communication with my car speaker Parrot ck3300 and parrot 3400 ls-gps and my Bluetooth Motorola earphone hs820 .The problem is that when I switch the car on the Bluetooth communication is working OK the first time. Once the car switch it off and start again the I-mate is not being paired although it show that the Bluetooth is activated ( flashing purple light) but no pairing occurs. When I check the I-mate in the Bluetooth definitions the checkbox for pairing is disabled. The only way to connect again is to reset the I-mate.
Please help me.
Thank you
Hi,
I have a Touch 2 and I am having troubles conneting it to my Volvo BT carkit.
With my S730 evrything worked fine.
Now the phone paires with the car and syncs the adressbook, but when I initiate a call from the car or the phone, the carkit just doesnt know he is in a call and does not mute the radio. I don't hear any sound through the speakers at all, but the phone thinks it is connected to the carkit and is in handsfree. Pretty anoying as you can imagine.
I upgraded the car's BT stack to the latest version 04.23_R but with no result. Disabling the data connection worked for some people but not for me.
Do you guy's have any registry hacks or procedures I could try?
The old phone worked great so there at least should be some backwards compatibility.
Thanks,
Jan