SD card disappeared *POOF* - MDA II, XDA II, 2060 General

Hi all,
Had my XDAIIi for a month or so now... beside the odd lockup it's been more or less trouble-free.
However, I put the phone in the cradle today and got a strange message from WMP about sync settings... upon further investigation I found that my storage card is no longer recognised by my phone. It a Viking 512mb card.
I can't see it on File Explorer or via exploring on Active Sync. It's as if no card is plugged in... I tried another old 8mb card that I had and it works fine.
What should I do. Try to return the card, or is there a way I can reformat it? Any advice would be helpful...

Hi
I got the same problem, this is the second SD, I got the same weird msg.
Did you find a way to fix it?
The SD is not recognize neither in digitals cameras (tried only one) or other pocket pcs (other XDAlli and an HP).
I've heard form some friend that lot of people are getting this problem...

maybe vikings are troublesome..
http://forum.xda-developers.com/viewtopic.php?t=25433&highlight=viking
http://forum.xda-developers.com/viewtopic.php?t=24546&highlight=viking
http://forum.xda-developers.com/viewtopic.php?t=17636&highlight=viking

Yep my new XDAlli killed a dane-lec 512mb card after a couple of weeks.. Couldn't use it in anything. Got another 512mb card this time branded as PRT?? card has been OK for the last 4 weeks but I do get the "storage card detected - search for audio & video files" message every now and then.. I also find the XDA can't see the card sometimes but a quick removal & replacement fixes the issue. I have also notice xbackup now takes around 10 mins..It was taking over an hour with the dane-lec...
I'm sure there is a compatibility issue with somecards..

AMAZING
I just read this post out of interest, casually browsing through the forum waiting for 5 o'clock :roll:, went to my XDA 2 and guess what.... no storage card!!!
Forunately, a soft reset was all it needed but how spooky :shock:

odd my xda2 like all others take a few sec's to reinit the sd card when it wakes up
and if it's needing some batt it dont
i've used sandisk slow version 128MB
and now kingston ultra something something 512MB
never had any issues apart from the sandisk being superslow

So once it's toast, is it really toast or can I somehow reformat it?
I guess I'll try to return it...
Can anyone recommend a card that hasn't reported any issues?

I am having the same problem... I am using PNY cards and am now on my fourth card. I am going to try a new branded card when i get the chance. People seem satisfied with ScanDisk cards so am going to try them.

MMCdata not seen
My XDA II recognize my MMC but file explorer does not show all of the data. Even my card reader does not show the data in MMC. But memory shows that Card is in use and all of the data is there as shown by the memory used... Please help!

Related

Storage Card Freezes Device On Resume?

hey guys, just wondering if this is a known bug on universals or just several roms or if i have a dodgy universal or sd card in general:
It seems when i bring the device out of standby mode after a long period of inactivity, i enter my password and the device just freezes, locks up - Dead.
When I take the storage card out and repeat, the device is fine which lead me to believe the card was duffly formatted, so i stuck it in my card reader and formatted it into FAT32 and then put all my data back on... same problem!
So i then flashed my device from the QTEK rom to the o2 rom in corp mode to see if i still had the issue... was fine for a short while then earlier today i turned it back out of standby and same problem!
So i've narrowed it not to be the storage cards fault, since the card works fine in my xda 2s, and card reader and it seems to either be a subsequent issue in the o2 and qtek roms, or maybe ive got a duff universal with dodgy card slot?
Is this lockup issue a known bug?
Sometimes when i get lucky the device doesnt lock up but instead the card disappears from the system view, and only removing the battery and then rebooting solves it.
If anyone can shed any light i'd appreciate it!
had similar problem
On my compact and PRO (univsersal) I had 1 1gb SD card that always gave a message improperly removed when the device came out of standby.
Used the card that came with my PRO , a 512mb SANDISK no problem.
Put the 1gb in my panasonic camera its fine. the 16MB that came with my camera but branded panasonic works fine in my PRO, left the 512 in my compact for as MP3 with bluetooth headphones.
I think the compact had less problems after a recent T-mobile ROM update.
I think the Compact and PRO are both fussy what cards they use. My 1gb SD card is a generiic 66x. Also I think that there are some bugs to be ironed out with power management.
BTW should it be flashed in FAT or FAT32, some devices can only read FAT I believe.
If you use standby/suspend and you have media files (music/books/etc) on the SD card and the app in main memory you'll have problems when you re-start. I get this problem with MS Reader and eBooks all the time. Looks like another bug in WM5 to me.
jah said:
If you use standby/suspend and you have media files (music/books/etc) on the SD card and the app in main memory you'll have problems when you re-start. I get this problem with MS Reader and eBooks all the time. Looks like another bug in WM5 to me.
Click to expand...
Click to collapse
Funny, I have all of my apps on the Main Memory, and my .prc's, .avi's, and .ogg's on the storage card, and I've never had this problem?
(I'm using a 1 Gig Jessops card that originally came with my camera, no idea what it "really" is though)
@sun69,
the problem only occurs if you use powersave/suspend and you leave a media file open, eg when reading an ebook.
this also happens when you have a 2577 folder on the sd card and do not have a start.exe in it. It will let the device hang.
Ive found the problem to be with the SD card itself, if i use the 128mb Sandisk from my Xda II s it's fine,but within ten minutes of sticking the 512 Lexitar card in, the whole device is ten feet under...
Looks like ill need another
MurphmanL
I reformatted my 2GB SD card and one problem I had with WM5 reporting a shortage or RAM went away. Not really sure why the Exec seems to be so sensitive about SD cards.
Actually this reminds me... I used a 1GB KINGMAX SD card in my XDA II Mini and it hangs randomly... Now I'm using a 1GB Sandisk SD Plus USB in my XDA Exec and it hangs randomly too...
I am reverting back to me Panasonic 128mb SD card to see if that helps... Although it's weird that on my Xda Exec it only SOMETIMES hangs when I receive an SMS... don't know whether this is two issues or one.
I have a 4GB Transcend SD Card. I can install and run any application on it but, the camera application can't seem to read or store any pictures on it. It states: "not enough memory"
I tried reformatting it using Pocket Mechanic on my Exec and still the same result. I tried reformatting it on my computer but it can't read the 4GB SD card from Transcend.
funny I have a 1Gb Sandisk card and even if I have no media files open sometimes it just hangs on resume. The only way to get around this problem is to leave the XDA switched on all the time and swithc only the backlight.
However, this way the battery life is shorter. I think this problem should be addressed to someone who is technical (not like me) maybe we get a plausable explanation of what shall we do.
It is very annoying since when the system hangs up the mobile does not have any coverage and in sales it means loosing potential customers!!!!
XDA EXEC
Same problem Here.
I had a 1 Gig card and I often had to take it out to solve the problem.
Now I have a 2 Gig card (Sandisk Ultra II) and the problem is solved.
I'm not that technical, but wasn't there an issue with dual voltage sd card's?
I too have a memory card problem. I have loaded some pictures and videos on the card but as soon as I try to open them in File Explorer the XD Exec freezes and will only work again if I remove the memory card or reset the Exec. Then it freezes again when I try and read the memory card again. I've tried loading stuff on using Active Sync and using a memory card reader and still the same. I've even formatted the card again. It is a cheap SD memory card will I need a new memory card or is it a software problem?
@jah, my wife has this same problem on her Wizard (vario), she got a 128Mb miniSD with her Vario. If she leaves the card in and allows the device to suspend then wakes it up she gets a white blank screen and has to soft reset to recover. With the card removed the problem goes away. She had her vario replaced because of this fault (tech support thought it was the vario at fault). It was only when the problem occured with the new vario that I had a play and found with the card removed the fault went away. We haven't taken the card back yet, but I am 99% sure it is a card fault.
I might try her card with the adaptor in my Exec and see if I get the same problems as you are getting?
Regards, Simon
It seems like Dopod900/Univeral is sharing the same problem, too sensitive toward particular SD brand/model. My Dopod900 also having a huge problem recognizing the Kingston 2G SD 133x but works fine with Transcent 2G SD 150x.

Help! Storage Card suddenly not showing - dead?

Help! Storage Card suddenly not showing - dead?
Has anyone had problems with the Storage Card completely dying? I cannot read my 1GB miniSD card on my Wizard device at all any more. It started being weird yesterday but after a reset I was able to access the data, but today it is totally gone.
A 16MB one works fine. :? These cards don't generally die that easily do they?
Could this be a driver issue or something else so I can get my data back? I have tried many resets both with and without the card in place.
I've the same problem (I guess) with my card. I'm not able to read my card on the vario. When i inserted my SD card in a PC he cant read the card. When i start my PC with the card insered system hangs on loading windows.
When I restart my phone with the SD card inserted WIFI wont go on, do you have th same problem CJSnet ?
This looks like the SD disk is something like an (unreadable?) bootdisk ?
I had the same problem with a SanDisk 1GB card recently. I sent it back to the supplier and they replaced it.
Before my "Mini S" I had a "2i" and it was well known that it would "eat" cards. On that forum they compiled a list of "never eaten" cards and recommended staying away from anything not on the list.
I suspect the Wizard may have a similar problem.
i've also got a problem with my miniSD, sometimes it doesn't recognise the card. But when i remove it and re-insert a few times it does work again.
A common problem with the SD-cards is that their contacts are dirty, cleaning sometimes helps.
Thanks mmm_ok, can you provide a link to that list of 'never eaten' :lol: cards please?
Mine is an unbranded type from Viking, so that could be the reason.
zawoot, I had no problems with WiFi and the card inserted.
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
What a pain in the backside. HTC not fixing the 'eating cards' bug has cost me 3 hours of my life. What price technology!
SD card problem
I'm facing the same problem. The last thing I tried was format the SD Card
using Pocket Mechanic "Logical Format" - "do not use quick format", format it
two times and just that. Also, as a test, I'm not using the full SD Card
capacity, my SD has 1 G and at this time I'm using 700M and since 10 days ago
everythiong is fine. As an additional test I leaved the battery goes to a
very low level and reseted the device to see it it corrupt the data .. but
is still ok.
My 2GB Adata myflash card has done this. I'm so mad, it has to go all the way back to china for repair.
This is really wierd behaviour for a phone. HTC in all its shoddy glory.
CJSnet said:
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
Click to expand...
Click to collapse
SO is there any other issues after you did the format?
I have an ATP 1Gb MiniSD and sometimes my MDA just said that it can't execute an application (that's installed to the miniSD card) because it was "usigned". When I run Resco Explorer, I noticed that the card is NO LONGER shown (???). So I took out the card, re-inserted it and it's now shown in Resco Explorer as "Storage Card2" ! So of course none of the program works since the links (in registry especially), pointed to "Storage Card", not the one that ends with 2. So my solution (for now) is to just shutdown the device, wait for a few minutes, then turn it on again.
I have had 2 cards from mobymemory 1gb and now 2gb - not one problem run well. Can highly recommend mobymemory the use single density cards or something that many of the other manufactures don't use. my advice stay away from cheap cards.
I used a backup utility my card died, and windows could not open it, I reformatted on my digital cam and it works again. It's the software loaded on it.
My MiniSD card popped out of its slot spontaneously last night. Ever since my Qtek 9100 would not recognise it any longer. It still worked on my card-reader attached to my PC. In the end I decided to format the card (not quick format) and now my Wizard recognises the storage card again. Losing all my downloaded attachments during the process. FYI It is a SanDisk 1GB MiniSD card.
sandisk 1g card is almost 2-yrs old and was first for typhoon and now serves faraday and wizard and just started acting wierd on wizard. every so often device does not read card upon waking. pulling it out and reinserting fixes it but i've moved programs to device. poo!!!
Storage Card seemed dead
I had a simuliar problem with my original qtek 1.6 rom until I upgraded to the latest imate 2.17.
Having worked 5-10 minutes with wi-fi, the storage card became invisible and unaccessible. To make it visible once again it was necessary to soft reset the device.
This and some other problems disappeared once I upgraded to 2.17.
Hope this help

SD card unreadable

The data from my SD card became partly unreadable, some prgms could not be started and when looking at the root folder of my card I found some items named like ç!é”è((é§éç. Putting the card out and back in didn’t help, only a soft reset did the job. All data was still intact. This thing happened twice untill now. I use a Sandisk 1GB card.
Has anyone had this problem before? I remember reading about the same problem on a forum but couldn't find the posting.
I also experienced the same problem
I had this problem before. When I pulled my Sandisk 1 GB Micro SD and pushed it back in, the System did not recognize my Memory Card. I did it several times and suddenly it came back again.
The trick I used was pushing the Memory upward (against the back of the phone) until the memory was not completely inserted. Roughly about 1/10 of the memory sticks out of the memory slot
I believe this is a major hardware problem with the Memory Slot.
I have had this problem with my 2GB miniSD on my MDA Compact- the first time i had no choice but to re-format the card and start over but second time, re-inserting the card solved the problem.
May be something to do with the card not getting proper contact.
It doesn't work at all anymore!
I've had the same problem with my 1gb SD card since I bought it 2 years ago. It's crap, because copying a movie for instance through the phone (MDA compact) takes forever.
Now I reformatted it, and copied some stuff to it through my card reader. But after putting it back into my phone, the card now is not even seen at all by my phone, and putting it back in my PC doesn't work either... now it's not recognised anywhere anymore...
Anyone, now how to get this fixed?!
Thx!
Re: It doesn't work at all anymore!
The Fittest said:
I've had the same problem with my 1gb SD card since I bought it 2 years ago. It's crap, because copying a movie for instance through the phone (MDA compact) takes forever.
Now I reformatted it, and copied some stuff to it through my card reader. But after putting it back into my phone, the card now is not even seen at all by my phone, and putting it back in my PC doesn't work either... now it's not recognised anywhere anymore...
Anyone, now how to get this fixed?!
Thx!
Click to expand...
Click to collapse
Try using this utility (or similar) to format your card from a card reader:
http://www.sdcard.org/Downloads.aspx I've used it many times on various cards and seems to do the trick.
Re: It doesn't work at all anymore!
sh500 said:
Try using this utility (or similar) to format your card from a card reader:
http://www.sdcard.org/Downloads.aspx I've used it many times on various cards and seems to do the trick.
Click to expand...
Click to collapse
Hmmm, thx for hint, but that didn't work either. Since the drive isn't recognised, so does this tool... weird enough the adminstrative tools in windows (drive managament) does see a 1gb drive, but assigning a new drive letter causes an error.... damn... looks like I'll be buying a new SD card.
Does anyone know which brands/types (I now have a 1gb Kinston) have less problems with this, so I can copy files to and from my card though my card reader instead of my phone, without srewing my card up?
Edit: Ha! I formatted my SD card with my digital camera! Leaving just the problem of not being able to copy files to my card through my cardreader...

miniSD card problems??

my miniSD card keeps crashing.. every time i reformat it.. (just bought it brand new 2 weeks ago.) but it keeps crashing after a little while..
so my girlfriends dad put tomtom 6 on mij sd card last night..
i look in the morning.. and 90% of my mp3 songs wont work anymore.. and my entire map with tomtom in it was gone?????? like wtf??
i got a wizard G3 with the underground edition.. and a 1 GB miniSD card..
reformated it on the computer and with more then 1 program on the phone..
(on the pc was my last time.. (like 2 hours ago...) did not crash so far..)
any1 has a solution for me??
thnx and greetz
where did you buy the card? what brand is it? how did you format it before it crash? is the card size displayed on the PC correct?
i bought it @ norrod in groningen/holland.. brand ... dunno... i used the phone to format it right after i bought it... and yes.. its being displayed normally.. unless it crashes.. cause even on the computer it wont copy things off.
even though.. it crashed again.. all the data was gone.. but at memory it still sees 50 mb used.. :\
god damn it.. i'm going to throw that *#&(#&%(&^)@)(!(@%$& phone out the window :S
I presume Norrod is a name of a shop. Anyway, it seems to be reputable. Unless you can confirm the brand, chances are it may be a faulty one (luck is not on your side). However, the good news is that, it may be a 1 off thing that it may not happen again. There are chances of SD card being wacky if you have your phone hanged and soft reset, which happened to be once when I was messing with my phone. But it never occurred again.
As for formatting on the phone, there are members reporting problems with card formatted on the phone. Since you have formatted on the PC, it ought to solve that problem. Hopefully it won't happen again.
well i had a 512 mb kingston before.. and it crashed 2.. so i threw it away.. cause it had bad sectors.. ( i had that 1 for about 1 year...)
and now this 1 crashes.. i thought mayby it had something to do with the underground edition and the omapclock.. from 180 to 228 or 240..
but it doesn't seem to be.. cause i've been running the last 2 days on normal 180...
I have a 2Gb unbranded memory card and have the same problem, I've managed to find that the memory gets corrupt when the card gets cold (3-4 Deg c), it's fine at room temp.
Got to replace it at some point.
Kingston cards usually have a lifetime guarantee... if you are able to find the package and the card, you may able to get yourself a new card.
hi
Try benchmark tools to evaluate the memory card..
before buying the memory cards..
SD carda
What is it about SD cards and Wizards. If mine takes a slight knock it cant see the card anymore - I have to re-insert it.
I recently got a cheap 2GB card from Hong Kong. Was a load of rubbish. Top tip, dont make the same mistake. Basically had a load of bad sectors and crc write errored all the time.
I have my old 1GB card in at the mo, and apart from the knocking issue (almost certainly a fault with the wizard) it works fine.
Anyone come across the issue where the SD card cant be seen by the phone anymore?
atdavie said:
Anyone come across the issue where the SD card cant be seen by the phone anymore?
Click to expand...
Click to collapse
Hi everyone, I recently started having the same problem with my 1gb mem card, and its starting to annoy me now. Would'nt mind to much if I new what caused it. I havent knocked the phone or played around the the mini sd card.
Quick question, Just wondering whats the largest memory card you can put in a xda mini s.
Thanks
Mark

SD Card is Damaged. Try Reformatting it.

Anyone else getting this with their S4? I bought my S4 two weeks ago and a Sandisk 64gb card to go with it and started seeing this error about twice a day. I returned it for a Samsung SD and didn't see the error for almost a week until today.
The card actually appears to be fine, all I have to do is remount it after seeing the message and all is good, it's just worrisome cause I store all my photos on there. I'm wondering if it could be the phone itself? I have one day left to exchange it, but it's rooted.
SD Errors are because the card is physically moving when its being written to. This cause bad sectors on the card. Try putting a piece of thin scotch tape and cut to shape of the face of the SD Card. See if it fits more snug....
Are you jogging with the S4 or something? Samsung SD's are class 10 which I think write faster. Maybe that is less likely to cause damage because its written so fast? Not sure....
Try the tape trick and see if it reduces the problem. Else its a physical problem with the slot.
i also have a class 10 64gb, some guy on the forum posted this problem too, he said that by formating the card with a PC and then formating it with the format utility in the phone settings has solved his problem. If not, might be a slot problem like slider mentionned
I had this problem too with my 32 gig class 10. When I put my shock absorbant case on it my problem went away
Sent from my SAMSUNG-SGH-I337
I had never had an issue with a Sandisk card until my S3 ate a 32GB. I then started readibg how the S3 ate non- Samsung cards. I have been using a Samsung card with no issues
hope you make regular sdcard backups and copy to pc
polish_pat is correct, reformat your card with sdformatter, use Full Erase On and Size Adjustment On
Of course backup first
you shouldn't have to reformat again in phone--
if the card is good this should solve your issue
I had tried 3 different San disk 64GBP class 10 cards and had this problem, the fourth one works so far...doing some searching I found lots of complaints from lots of different device forums about this card. Only fix I found was running chkdsk repair on the card in Windows but this only worked for a few people ( couldn't save my first three cards)
anyway, imo exchange the card or better yet buy a different brand
Sent from my SAMSUNG-SGH-I337 using xda premium
Posting here as doing a search revealed this is the closest to the problem that I'm having. I've had my AT&T Samsung Galaxy S4 for approximately 1 month now. I purchased a Sandisk 32GB SD Card for the phone. Two days ago I began experiencing issues where when unlocking the phone I would notice the card would unmount then remount (this was in the notification bar). Later that night, the card unmounted and there wasn't any way to get it recognized again. I posted in some other forums and someone said there were some good posts here.
I've contacted Sandisk regarding the card and they refused any involvement stating it's a problem with the phone, not the card. They determined this because once I was able to get the phone to recognize the card and plugged the phone into the PC, the card was able to be read. As long as it's readable, it's fine. After dealing with this I eventually found my MicroSD to SD reader and plugged it into my media reader in my printer. I had quite a few issues from time to time reading the card, however I can't 100% for sure say whether this is the card or the printer.
Anywho, I grabbed copies of what I needed. Formatted the card on the PC, then formatted it on the phone. I began to copy my entries however at one point instead of saying I had 29.* GB Available, it said something like 2.0 EV of 3.0 PE or something like that... these weren't the typical numbers I've seen nor the units of storage space. I apologize that I can't recall that information. I reformatted again and it worked. Left the card in the phone empty over night then tried to copy files later today. This worked.
Now, approximately 48 hours after the problems began, I noticed more issues. SD card stated that it had been damaged and that I should reformat it. While this message stayed in notifications, I confirmed I was still able to read files on the SD card. When googling that error hoping I'd find more resources, the card again unmounted.
One of the resources I found had me do a CHKDSK /F /X on the card. I did this and found no issues. I've replaced it back into the phone and it seems to be working for the moment.
1) Are there any confirmations if this is a bad card, or if perhaps any applications are causing the card to do this? I do have QuickPic and have enabled some of the hidden file features if that helps.
2) Do we know if there are any logs that can be pulled to help verify this?
3) Is it a specific card? (I've heard SanDisk 32gb, but also have heard non-Samsung SD will fail)
Looking to get this resolved ASAP. This card was purchased directly from AT&T when the phone was purchased. I am just looking for some confirmation that if I have to buy another card, I'm not going to gamble if that's going to have the problem as well.
Thanks! If I forgot anything please ask!
Edit: Per the thread, this is a Class 4 card. Also the phone was not moving when it was writing data. I've been couch-ridden all day and unlocked it. I don't believe the phone was in deep-sleep mode as I had received a text not long before I began noticing these messages.
same problem
i have the same problem and guess what ?
the phone is acting like the ***** it stays ok for 3 weeks while that time i download to many stuff to my ext card 32g Elixir Memory after that it crach and give me notification that sd card is damaged and i have to reformat it sucks
by the ****in way this's the fifth time it crash i changed the memory to sony and same and changed to Kodak and the same
so abso****inlotley its the S3 for me soon its going to trash
polish_pat said:
i also have a class 10 64gb, some guy on the forum posted this problem too, he said that by formating the card with a PC and then formating it with the format utility in the phone settings has solved his problem. If not, might be a slot problem like slider mentionned
Click to expand...
Click to collapse
This works! It fixed the issue I was having with my SanDisk 64GB.

Categories

Resources