micro$oft voice commander/ install to card but get error!!! - JAM, MDA Compact, S100 General

hi all,
not too sure if this is a problem that i have or others have experienced..
but i installed some software..namely
micro$oft voice commander
to the SD card instead of to the main memory..
firstly i get an error on setup saying that a critical error has occured during set up... then when i reset and begins to load in.. it says it cannot find the EXE. which is definatley there.
(M$voice is about 5mb! or so it says... so that's a lot of memory!)
nextly another test.. after a hard reset.. i installed it into the main memory... setup error message is still there.. (ignored). reboot.. then the program works okay..
does anybody experience this???? i am also having the same issue with BUTTONMAX.. why is it doing this?
i've read and (very hazy).. that upon a soft reset, the SD card isn't immediatley read thus can give you this error message. but everything should work okay... is this true for this instancE?
any light into this topic would be great (and tips!)

When installing MS Vioce Command you should have been warned that this program should be installed in main memory, otherwise it may not work properly!

insall it into storage... it fits exactly but there wont be any hicups - at least mine works great!

I did installed Micro$oft voice command into storage card too and it worked perfectly.
To do this, you can either
1) set Voice command to be the last program to boot after a soft reset. I use Dinarsoft Memmaid to enable this.
2) remove voice command shortcut in Windows\StartUp.
I don't use any of the above at the moment since I installed voice command into the storage of my xda ii mini.

ROM RAM SD CARD??
confused!
ROM vs RAM vs SD card... i'm a n00b! and i'm tired of installing try to make the 'perfect' cookie cutter!
Is the storage on the magician JUST as it is... STORAGE? It's not part of the RAM?
How much programs can you install into STORAGE? If you fill up STORAGE but allow maximum capacity for the RAM.. will this have any affect on the speed of your PPC?
What's the prime difference installing on the SD card & STORAGE? besides faster acces?
If you hard reset you loose the STORAGE.. so when you back up with SPRITE BACKUP... you should untick the persistant storage so that when you do 'restore' the mini... everything is back to normal?
sorry about the questions.. i did a keyword search but nothing came up.
thanks guys.

Related

Very strange,can't delete or add any file on my xda II

Strange indeed, I can't delete or add any file, when I try to do so, the small circle shows up to show that the pocket pc is working, then nothing happing it keeps going round till it blocks. I had this problem before and I solved it with a hard rest. I don't have the intention to hard reset again. Anyboby had this weird problem??
I might add that i can delete the files on my computer through activesync with no problem. I have O2 German upgraded to the T-mobile 1.60 english.. so any clues whatsoever???
What software do you have installed, I would be inclined to do a backup then hard reset, then when reinstalling software check if the problem occurs after each installation of your programs, this might pin it down to a program that is locking all files for some reason.
It seems that it happens randomly, cuz when I made a backup I didn't had this problem.Then when the problem occured I restored but the problem remailned. I have a lot of programs installed I wans doubting Microsoft voice command but the problem remailned after uninstalling it other programs(metro,tomtom 2,finger clix,fullscreen keyboard,sms writer,xcpuscalar,pocketMVP) any of these programs is known to force this problem. Thanks
I don't know that any of these programs by themselves are known to cause this behavior - but sometimes combinations of programs, glitches during installations, or any of a dozen other things can cause abnormal behavior.
I would agree with cruisin-thru . . . the only way to be sure if it is one of the programs you have installed, and if so which, is to do a hard-reset and install the programs one-at-a-time, giving some time for testing between installations.
Same problem here
Yep - I have had and currently have the same problem.
Uninstalling programs does not help, only a hard reset and then reinstall one by one testing as you go.
I have done a hard reset in the past, but never built it back up to the same spec, so have not pin pointed an app (if it is an app)
It may help if you compare to my install list ??
Let me know how it goes,
Ian
Adode Acrobat Reader 1.0
Astraware Bejeweled
Astraware Bookworm
Belkin WPDAK
Boma Software Reversi Game for Po...
Fonix UK Roger (2 MB)
Fonix VoiceDial 1.2 EN
Macromedia Flash Player ActiveX
Microsoft Money for Pocket PC
MTUX RingToneX
Pocket Bluetooth Tools
PocketMac_CEWindows.Net RegKin...
Realnetworks RealOne Player
SanDisk Wi-Fi SD Card for WinCE 4.00
SBSH.net Birth2Day
SBSH.net Calendar Plus Proffessional
SBSH.net iLauncher
ScaryBear Software Check Notificati...
Smartphone4u Extended ROM Switc...
I have also had, but removed now:
mov Software imov Messenger(tm)
>Strange indeed, I can't delete or add any file, when I try to do so, the >small circle shows up to show that the pocket pc is working, then >nothing happing it keeps going round till it blocks. I had this problem >before and I solved it with a hard rest. I don't have the intention to hard >reset again. Anyboby had this weird problem??[/quote]
I think that there is a bug which appear only when you use the SD card slot.
I've the same strange randomic problem, the workaround is:
- Remove SD Card
- Softreset
- Reinsert SD Card
At least, you don't need hard reset anymore
I think that there is a bug which appear only when you use the SD card slot.
Click to expand...
Click to collapse
All I can say about that is that I use SD cards extensively, and I have never experienced the behavior that whafni77 describes. It could be . . . but I'm skeptical.
Maddoc ur the man, it really resolved the problem and u made me feel small not having thinked of that. For the rocord the only program in common with InaF is Pocket Bluetooth Tools, don't know if it has something to do with it. Thanks guys
Well what do you know!!!
Well Maddoc, this just goes to prove you learn something new every day!
o I tried to delete a file in File Explorer - it hung
o I killed off File Explorer from the running program list - probably not required, but just to prove the file had really been deleted
o I ejected my SD card - a very cheaply made one
o Soft Reset
o Tried to delete another file - and it worked !!
o Inserted the SD card
o Tried to delete another file - and it worked !!
I'm very happy, and the confusion as to why it is acting like this will soon disappear.
Thanks again!
That's the good part, the bad one is that you have to pull out the SD card every single time you do a soft reset, but I'm satisfied with that until someone knows what the heck is going on.
BRosenow said:
I think that there is a bug which appear only when you use the SD card slot.
Click to expand...
Click to collapse
All I can say about that is that I use SD cards extensively, and I have never experienced the behavior that whafni77 describes. It could be . . . but I'm skeptical.
Click to expand...
Click to collapse
Just to add some extra informations...
In my office there are 2 qtek2020 users, me and another friend.
The only differences between devices is that i use SD cards regulary and only my device is having this kind of problem, the frequency of this problem arises when i use TOMTOM navigator and the maps are stored in SD card.
The results are the same with my 256mb sandisk and 128mb pretec.
Seems that at some point the QTEK2020( and i think also mda/imate etc... ) is unable to "receive" file change notifications( or something like that ) and the results are:
1) You can't delete file with "file explorer"( hourglass loop )
2) If you write a new note and save it, you can't even see the note on the list !!!
3) If you install another application, the program group/start menu is not updated !!!
BTW i've just reformatted my 256mb sd card with flashformat two days ago, no problem for the moment but i'm not using navigator now...
Thanks to all
I stand corrected! Partially anyway . . . :wink:
Since I do not use TomTom Navigator (or any other GPS software for that matter) it is conceivable that the software is corrupting the FAT on the SD card.
Have you tried using StorageTools (or other similar software) to scan (automatically fix all errors) and defrag the SD card to see if it has any effect?
Well I formatted the SD card(pdc 256) with storage tool and fixed all errors(tried fat32&16) but the problem still there. The thing remains to try is to uninstall TomTom2 along with the Gps software to see if it solves. :?:
A key point here is that even uninstalling might not solve the problem. It is a sad fact that many times when you uninstall a program, both on PCs and PPCs, it is not uncommon for registry entries to be left behind, unnecessary .dlls and other files to remain, and some files that were overwritten by newer (or older) versions to remain as well. This is why several of us have stressed hard-resetting the device . . . it is the ONLY way to be sure you are starting from a known platform.
SD problems
I've only seen these type of problems if I haven't first formatted the card in the target device first.
Well finally the problem resolved. I should say the hint that mrg2003 gave is really the solution,in other words you should not format the card from the device but rather from the card reader(fat and not fat32) and bingo no more blocks. I should say this forum is great. Cheerz :lol:
Re: SD problems
mrg2003 said:
I've only seen these type of problems if I haven't first formatted the card in the target device first.
Click to expand...
Click to collapse
I confirm, i formatted my sd with flash format... No problems at all now !!!!
I really don't understand this perfectly right! I have an SD Card and the same problem as all of you state.
What do I have to do? I use the Qtek 2020...
Thanx in advance.
Still have a problem and can someone help me with it!
I formatted the sd card with a lot of tools through the Qtek, like storagetools and flash format.
Afterwards I tried to format through windows format tool!!
But none of them worked and still have the problem of the hourglass..... Can somebody help me? I have a Sandisk 256 MB Ultra II.
Thanx in advance

SD card free memory incorrect

I have a 256Mb SD card that suddenly reported itself as having only 40Mb free when the total of stored files was only 16Mb.
I had to reformat to reclaim the lost space.
Has anyone else experienced this with SD cards and, if so, what it the likely cause?
well file explore dont really display hiddenfiles so the card could have all kinds of those
other file managers like total commander display all files
hi. I don't have XDA 2 but I think it happen to most most ppc 2003 OS because you are install some software that do not fully support or not support wm 2003. ( it happen to me on h5555, h5400,e405) So you need to hard reset a few times.
Sd problems continued....
High
Well i have a similar problem, but could solve it with a soft reset.
Now i have another problem..... I dont know how, but my card is.... i dont know how to explain. let me start from the beginning.
When i got my SPV M1000, i also got a new SanDisc SD 256 MB.
I installed cuple o programs :
PHM ( Pocket Hack Master ) main memory
Pocket Mechanic Main Memory
Stuntman Evolution Sd Card
Crazy Cart Sd Card
just to give you some exaples.
I then copyed the exe files and a X back up on my card. to have them with me if needed.
After biing happy for a half week ( experimenting with PHM and Pocket Mechanic) and a lot of playing with my device, all of a sudden, my SD card was wiped out!!!
It was all gone!!!!!
I tryed to repair/reformat/restor with pocketmechanic but nothing.
Everythin was simply not there anymore ( im talkin about 30 meg of data!!!
Active sync tells me " unavailiable " when i try to install to the SD card, and when i chose to do it anyway.... it works.
Files get istalled just fine on my card.
Now for the interessting part.
Crazy Cart just stopped working!!!
" Cannot find "crazycart" or one of its components.
Make sure the path and filename are correct and all the required libraries are availiable"
is the text i get when i try to start it.
Its happenig again...... its starting to ,lose files??
has anybody expirienced the same or similar ?
is my card broken eaven though POCKETMECHANIC TELLS ME ALL IS FINE?
Any help would be coooooooool
thanx
peace

The file X cannot be opened.... Not signed.... ARGH!

Hey all,
I've searched through this as much as I could, and found a few things, but nothing that's ident.
My problem occurs even after a clean hard reset, and has only happened since the latest ROM update, so if anyone else has it please can you say if you get this problem... or don't...
Basically, my T-Mobile Pro will work fine for a while, but then I go to it any time after 10 mins of being clammed, and with virtually everything I try to load it comes up with an error dialog saying:
"The file 'X' cannot be opened. Either it is not signed with a trusted certificate, or one of tis components cannot be found. You might need to reinstall or restore this file."
But this is with EVERYTHING, HTCMesages.exe, HTCCalender.exe, Contacts.exe, TomTom Navigator.exe...... EVERYTHING, ARGH!
The only way to sort it is soft reset, and then everythings okay, for a while anyway... till all of a sudden.....
The only things I've got on apart from the standard T-Mobile ROM is TomTom Navigator 5.21 and PocketBreeze 5. But I'm sure it's nowt to do with either of those...
Please someone, anyone,,, HELP :-/
ARGH! Just after I posted before I hard reset and got it going again.... until now.... :evil: :evil:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
cktlcmd said:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately it's not the SD Card, its core windows mobile applications aswell, like the contacts and messags.
I think it might have been to do with the ROM I was using, I was using T-Mobile's latest (still pretty jurassic though) but switched to the iMate one, and no problems now :-D
Surprised if it is the ROM though, as thought others would have got the error :-/
Here is the solution. I have a Samsung mobile phone and got this error after I installed Samsung's standard multimedia player "Touch Player" into My storage. Then I uninstalled it and re-installed into main storage and it works now.

Unable to start camera not enough storage in available to complete this operation

I started this new thread as the previous one on the same topic did not give any satifactory answers to this problem
I also the Windows mobile 6 upgrade to my HTC 8525. I did a restore of my previous data with sprite software. All went very well until I tried to use the camera.
I got "Unable to start camera. Not enough storage is available to complete this operation."
I have plenty of space in storage. The camera just refuses to work.
Searching the forums, I have only found one thread who has gotten this error message. I followed all the possible permotations to fix this. I tried to do a hard and soft reset and cleared my memory (both storage and program). Uninstalled several programs. I have a 2GB micro SD card with over 500MB of free storage on the phone. The camera still refuses to work.
What should I do next?
try removing the sd card then soft reset the device and when it has completed restarting windows insert the sd card and it should ask if you want to store images on there instead of main storage.
same deal
I did try that. It did not prompt me for anything after I reinserted my SD card. Any other suggestions.
Thanks
R.
r3001n said:
I did try that. It did not prompt me for anything after I reinserted my SD card. Any other suggestions.
Thanks
R.
Click to expand...
Click to collapse
ive had this same problem for a while now and have resorted to using coolcamera.. my guess is that it has something to do with the backup. the problem on my end dosent come up until i restore a backup from spbbackup... so note what programs you have, hard reset, and start fresh...
the camera will be working.
This is because not enough ram is available, simply close any apps running in the backround and try again.hopefully u can end programs with X-Button. some of the "cooked" roms have way too many services running at boot and it almost impossible to make enough ram available.
fixed problem
Ifigured out this was a problem with the sprite backup software. For some reason when you back up some older programs with sprite and then do a system restore after having changed from WM5 to WM6, you loose the camera function. I fixed the problem by reseting my device to original manufacturers settings and then reinstalling the programs one by one without using sprite backup software. It was very time consuming ad I had to retrieve my saved data files and contacts before resetting the device. But my camera works fine now!
it happened to me some days ago aftyer restoring backup
a clean solution:
look for the camera oem package of pandora, look for the recistry settings in the .rgu file, translate it to a regedit4 compatible .reg file, execute it, and problem solved. it is a problem registry related. hope this helps

Problem with applications

Hi guys,
I've got problem with my elf. I've got some cabs on my storage card and when I'm trying to install them, there's a question about localization for this applications. When I'm checking box at 'storage card' my elf's trying to install it on phone (it's trying to install it on phone, no matter what I've checked), where's only 11 mb free. Why I can't install aplications on storage card?
Card is free in 63%.
Btw. I don't know or is it important, but my OS is 5.2.1620
Thanks in advance
Sabtuz
Sorry for my bad English
Have you tried a hard reset?
Sometimes Windows Mobile..
You know.
I even change soft (onyx ultimate) and still same problem...
Try Onyx Micro, see how it goes.
Still same. Maybe sth in registry?
Have you tried changing microSD cards?
Make sure they are not write protected.
Hellow
Dose this occur with all (or some) programs because some programes are designed to run from main memory and not sd card

Categories

Resources