Related
I am trying to upgrade my Siemens SX56 to ROM 3.17 from Yorch.net,
I did the following:
1. Backed up the current ROM using OSImageTool.exe
2. Downloaded ROM 3.17 from Yorch.net in a .exe file format
3. Clicked on the downloaded .exe and I get the following error message:
Cannot find the ROM image to upgrade your Pocket PC. Please download and try again.
Please help, I am a newbie!
1st mistake...DONT USE AN EXE to upgrade. Use the sd card method. Otherwise you will be screwed.
When I select zipped NK.nb1 (SD-card flashing) I get the following error:
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739Cannot fit files in given sectionsError splitting files
:shock:
From what you posted it appears theres a problem within the Kitchen,
try back later!
HTH
Where else can I get 3.17 , the only kitchen I found was Yorch.net
Now the log shows:
adding: NK.nb1zip I/O error: No space left on device
zip error: Output file write failure (write error on zip file)
Click to expand...
Click to collapse
I'm guessing that the kitchen needs to have old results purged occasionally (possibly manually?).
Strange I used it earlier to get stock ROMs and I did all of them with no problem. Hmmm
jgalindo said:
Where else can I get 3.17 , the only kitchen I found was Yorch.net
Click to expand...
Click to collapse
You can use the XDA developers Special Edition ROM v1.2 its based on the same ROM.
XDA developers Special Edition ROM v1.2 can be found at:
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
HTH
Ignore my last post. I went back and was able to cook a 4.00.16 ROM, so it's not a server disk space issue (like the error message made me think).
And I just cooked a 3.17.03 ROM. Guess it might be back.
Thanks a lot guys, I'm still trying with no success. :x
I just realized Vallerhum has the setup I want, I also have a Siemens SX56 on ATT. Where did you get your ROM?
I got it from Jeff's kitchen before it went south. I am trying to get my own up for I have all of the ROMs to date.
Is your phone also unlocked?
How can I get your ROM? I am going to another country on Friday and need to unlock it before then so I can show off to my friends
No my phone is not unlocked. I am not planning on changing companies anytime soon but if you want to unlock it...just load the 3.17 rom or if you have ppc2002 just install the xda unlocker and then install the ppc2003 rom of your choice. However, always use the sd card method, dont use an .exe.
I was able to cook a ROM! This site is great: http://www.zensay.com/qtek/ceupgrade.html
Thanks all for your help!
Now, I'm playing around with other stuff and seeing If my unlock was successfull.
That site is not a kitchen. It is for teaching how to do an SD card ROM upgrade. Where did you cook (or download) your ROM? Cooking is the customization of ROMs with other softwares.
I want to upgrade my 02 rom to the imate rom
which imate rom supports the aku2 patch, as o2 dont know when there going to release this support.
this is also my question, is it possible to use Imate Jasjar ROM for O2 Exec, and where i can get it , then i can use O2 software on new ROM ? Thank you.
YES!
I upgraded my O2 Exec to the new i-mate ROM and man.. it's like owning a completely different machine.
plenty of memory left ( i guess memory leaks were mostly fixed)
dazzling speed.
machine doesn't get stuck several times a day.
I am happy.
You have the official ROM. Search through it, I don't know in which thread I saw it, but the filename is: JASJAR_WWE_13076_164_10900_wwe_ship.zip
You should be able find it here using the search button.
Then you need to use a tool called maupgradeut_noid_645.exe
Also available here. It will allow to install the JASJAR ROM on O2 Exec. But I think your warrenty will voice.. unless you revert back to the O2 ROM which is downloadable from my-xda.com
MOBILER
Sorry again, i have this question, my XDA Exec is unlocked by deffault, after updated with the Imate ROM, is my Exec still unlocked ? Thank you.
yes your exec will still be unlocked. I have an exec with a Orange simcard and the latest imate rom. No problems.
hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks
ccoyote51 said:
hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks
Click to expand...
Click to collapse
From the link under i-mate in the wiki page for universal
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
go to ftp://ftp.clubimate.com/
Get the file JASJAR_WWE_13076_164_10900_wwe_ship.zip. About 64Mb. Unzip the file twice & you will get the readme.doc file for the instruction.
Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.
doody said:
Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.
Click to expand...
Click to collapse
I think I used this version when I upgraded O2 XDA Exec to JASJAR rom. Didn't run into any problems
Thanks for your replies and PMs, i-Mate rom is now installed
Also got fed up with waiting for O2 update and tonight loaded the imate rom and push email is working nicely . I will try and post some instructions tomorrow if I get chance.
what should be the final specs
mine are ROM 1.13.82 WWE
rom date 11/30/05
radio 1.09.00
protocol 42.42.P8
Ext ROM 1.13.188 WWE
ihave downloaded imate JASJAR_WWE_13076_164_10900_wwe_ship should I update with this my O2 EXEC
Please advise
Here is the process as promised. There isnt too much too it so hopefully you will be able to understand my ramblings.
You need the Imate JASJAR rom file which I downloaded from
ftp://xda:[email protected]/Universal/Shipped_Complete_Updates/
The file that you need is JASJAR_WWE_13076_164_10900_wwe_ship.zip.
First thing to do is to extract the files in the exe. There are two ways you could do this.
You can do this by running the exe file this will extract the files into a temporary directory in your profile.. for example c:\documents and settings\username\Local Settings\Temp, look for a very recently created directory in there, don’t ok the error message that you get when you run the exe as it will delete the temporary files. Just copy the files out of the temp directory somewhere else.
OR
You can use winrar to extract the files from the exe. Extract all the files into a single flat directory. Remove all directory structures so that you are left with just one directory containing all the files. (didnt try this way but I presume it will work)
Then download this file
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
Extract the .exe in there to the same directory containing all your other files.
Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it…..
Usual wavers at this point.. upgrading flash may lead to dead device.. do so at your own risk… invalidate warranty…etc etc
Once you have plucked up the courage connect your device up to Active sync and run the exe file that was contained in the MaUpgradeUt_noID.zip file that you downloaded.
It seemed to take around 30 mins for the whole update process.
Im just going through adding my applications again and setting up the Vodafone GPRS configuration but so far seems fine and push email works nice and fast so I am pleased I have made the change.
Hi jwarbutron,
Thanks for the walkthrough, Im following your instructions and have now started the upgrade.
I got past the screen where it tells me my current version numbers and what the new versions will be. I said OK, go for it, and now its displaying the 'Checking the information on your device .. please wait ..' screen, I presume I just wait for 30 mins or so and the upgrade is complete? There isn't a progress bar or another screen Im supposed to see?
Cheers
Nas
hanks jwarbutron,
Your procedure works like a charm Thanks once again . Pl let me know how to get original #D phone pad interface
Unfortunately it didn't work for me, I left my phone plugged in for about 4 hours, it still just displayed the checking page, and now my phone wont start. Switching it on, I see some text in portrait mode saying usb at the top, and v1.00 at the bottom.
I'll dig around this forum to see if I can find a solution.
Nas
Third attempt looks to be good though! Got the progress bar, upgrading now... :lol:
Nas
Just updated last night, and good grief the imate ROM is so much better.
Its much smoother, quicker and generally a much more pleasant experience.
Very much recommended to anyone who who has the Exec.
Cheers
Rich
Well, my upgrade completed, but I still get the portrait page with USB at the top and v1.00 at the bottom. The upgrade said it had completed successfully, is there a step I have missed?
Cheers
Nas
Im starting the upgrade again to see if I missed anything, I have the screen with the progress bar, so I know its doing *something*.
While its going, any ideas what I might of missed?
Thanks
Nas
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
one problem is that after that, it will lost the homezone icon in O2. so you have to look for the software and setup it. just find one HZ_V0530_Magician_AKU2.6.CAB ,but didnt work well on wm5. So if someone can deal with it, please post it.
sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Is it need to be unlock CID first? Or we can flash it with this step without any processes before?
If if have to do something before, please, post it to me, I am very new for flashing ROM and I also bought Neo fro German, too.
So please post the process previuos flashing for me.
Thanks in advance
ans also thanks machinagod for help everything
Hello, thanks for this. I presumed it worked fine for you?
I was wondering, is there some way to flashing it back to original? I mean, if i want to flash back to the o2 rom? Is that possible, and if so, how? I have not seen the o2 rom anywhere yet??
Can you tell me what you found to be the biggest difference in the new rom? Is there momre included software?
need not to unlock cid first, it can overwrite the original german rom.
FOR can
not get the german rom. therefore, cant write back to german rom.
sskstar said:
need not to unlock cid first, it can overwrite the original german rom.
FOR can
not get the german rom. therefore, cant write back to german rom.
Click to expand...
Click to collapse
Thanks a lot, sskstar
Can I ask one more, are there anyproblems after you flash your neo, i mean the stability or how about the OMAP overclock still work.
Thanks in advance
I get error: ERROR 240 while doing the ROM update. What should I do?
sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Hi.
I tried this procedure on my Norwegian Qtek S200 with ExtROM 2.10.7.108. It all went fine until the phone started flashing. At 1% I got an error message on PC, which I don't remember, I clicked Exit and the update program stopped and nothing more happened on the phone. I restarted the phone and now the display only shows a red/green/blue screen and absolutely nothing happens. Phone won't start anymore.
Anyone who can help me out? Is there any way to flash the ROM from from SD-card? Help...! ;-\
Thanks, OrvarK
OrvarK said:
sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Hi.
I tried this procedure on my Norwegian Qtek S200 with ExtROM 2.10.7.108. It all went fine until the phone started flashing. At 1% I got an error message on PC, which I don't remember, I clicked Exit and the update program stopped and nothing more happened on the phone. I restarted the phone and now the display only shows a red/green/blue screen and absolutely nothing happens. Phone won't start anymore.
Anyone who can help me out? Is there any way to flash the ROM from from SD-card? Help...! ;-\
Thanks, OrvarK
Click to expand...
Click to collapse
If you are still having the problem please take out the battery and wait ca. 3-5 secs and reinstall it back again. After doing this you can power up your device once more. And it should fine.
dont kill me
Hi.´m from Brazil, and I´m having a hard time to do the process.
Have some questions:
1- where do i find the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.e xe ?
2 - The file i supose create is in the computer ?
3 - Where is the romupdateutility.exe ?
The most important, I have a Qtek S200 form FRance.
version Rom: 2.9.7.33 FRE
Date Rom: 2/14/06
Version de radio: 02.07.20
If need some info let me know
Thank you all, very much!!!
need RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.e xe
Brothers if somebody has RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe. then please upload it on rapidshare or some where else.Because I have tried a lot for this file but I could not find it. Thanking you for help in advance.
toor_rana said:
Brothers if somebody has RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe. then please upload it on rapidshare or some where else.Because I have tried a lot for this file but I could not find it. Thanking you for help in advance.
Click to expand...
Click to collapse
It's on the wiki... Look under "Official ROMs" and I'm sure you'll find it...
Why do some devices brick and other ones don't
I would like to do this German to English rom, but i'm afraid of bricking it :s .. Is this brick safe?
german to italy
salve a tutti!
qualcuno puo' dirmi
come cambiare lingua nel mio
O2 xda neo.
grazie
timmeke154 said:
Why do some devices brick and other ones don't
I would like to do this German to English rom, but i'm afraid of bricking it :s .. Is this brick safe?
Click to expand...
Click to collapse
If you flash an OS only ROM, and us soft/jump SPL, it'll always be recoverable.
where i can find the romupdateutility.exe?
i already download the version in english, but when it's going to start the process appears the legend "ID ERROR", what can i do??
You'll need to use Hard/Soft SPL.
l3v5y said:
You'll need to use Hard/Soft SPL.
Click to expand...
Click to collapse
??????? what is that??
and how i use it?
I have a Dopod C858 that is from China. It currently has the Chinese version of Windows Mobile 5.0 and I am looking for an English upgrade to Windows Mobile 6.0. I tried using the RUU for the HTC P4350 but it came up as a Model ID Error and I couldn't continue. I tried doing a CID Unlock using IMEI check but they don't support the Dopod C858. Does anyone have any ideas? Oh and one more thing. Currently, the Comm Manager on my Dopod does not have the WiFi option. I noticed after I did a hard reset that when it was loading the .cab for Comm Manager, it displayed something like no_wifi.cab. Did Dopod Asia purposely disable Wifi?
EDIT: I contacted IMEI Check and they helped me out by enabling my IMEI. My device is now supposedly "CID Unlocked."
QQ group 33128089
Any luck with finding this via QQ? I have the same need...
Here is what I did: I CID Unlocked my phone using IMEI Check and downloaded the DOPOD Rom file located here. After that follow these directions and you should have an english rom:
Tools you need:
==============- HexWorkshop from here
- the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
===========a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use:
"Extract files to folder ..." from conext menu Now it will unpack all
the
files
c) in the new folder you will have ONE file like "HRUU_signed.NBH"
(*.NBH)
RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from
context menu
d) You'll see on the 5th row HERA10000
==!!! make it HERA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex
Workshop" from conext menu
Search for text "BsaD5SeoA" (without quotes, case sensitive)
OVERWRITE "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the
file
ROM-Update:
==========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker **
4) After phone is unlocked run unlocker (again) BUT when the unlocker
ask
for UNL file, remove the USB cable from the phone THEN press "Cancel"
on the
unlocker select file window (unlocker will close on PC). NOTE: The
screen on
the device will not show something usefull when in this mode. Most
probably
it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like
it
is!
5) After you closed the unlocker, attach usb cable again (phone has
still
white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message:
"Data Crashed, contact service provider" (-*!NO PANIC!*-)
==Simply fix this problem by running the unlocker again and this time
select the key file normal way (full unlock process again).
The only problem is that the ROM is WM5 and there is still no Wifi.
Credit goes out to the IMEI-Check Team who provided me with the instructions!
Great, thanks for the info.
One question -- can you use the steps outlined to upgrade to WM6?
I was able to install WM6 before, using "aserg way", but the radio didn't work b/c the radio rom was not updated as part of the flashing process.
The way I understand it, if I can unlock my device and use the process you listed, I should be able to use a RRU which has an updated radio rom. After that, I should be able to sucessfully update to wm6.
What do u think?
I tried flashing a couple of WM6 roms but both of them didn't work. One stopped at 2% (Invalid Model ID) and the other one gave me an "Invalid Command." I currently have radio version 2.71.90, do you think it will work with WM6? If so, can u provide me with instructions on how to flash to WM6 using the aserg method?
Last time I tried upgrading to WM6, I found a cooked rom posted on this forum, and used 'aserg's' method to update it w/o updating the radio rom.
The method basically involves using a tool called 'awizard' along with a few other small utilities. The instructions should be easy to find on the forum here, let me know if you can't find them.
But before you do that, verify your radio is up to date. There is a minimum radio version you need to have (a search for radio rom on the windows mobile 6 forum should turn it up) before you can fully use a wm6 rom. The only known way to update the radio rom is to install an RRU package (which it seems like you've been able to do).
Currently, I'm waiting for my purchase & id to be validated with IMEI check.
Once that's done, I'll start with the steps you listed and try to get my radio rom up to date. After that, I'll select a rom, and do whatever it takes to get the rom installed.
I'll record all the steps I take as I do it, and post my results.
Don't worry -- I won't waste any time here, I've been waiting to update my device for a long time.
i'll be waiting right here. good luck!
oh and another thing, i am currently using this rom (ROM ver. 1.8.405.1). it gives you radio version 2.71.90.
It appears we need to find an RRU which includes a radio rom of 2.79 or higher.
We both currently have radio roms at 2.71.90, which is not good good enough for WM6.
I'm guessing we could use one of the posted upgrades (look in list of available official shipped rom's) and upgrade, even if we can't find one in english.
Afterwards we should be able to upgrade to wm6 of the appropriate langauge.
i read somewhere that one of the german ones has an updated radio rom. would you be volunteering to try first?
Yah, I found a few RRU's which contain a 2.79 version of the radio. I still need to wait for IMEI to verify me before I can continue with the process though.
btw... what time zone are you in? (I also bought my device in China, I live in Shanghai right now)
i'm in shanghai right now too!
i'm wondering if you can answer this for me. i don't know why some roms work and others don't. I currently have ROM version 1.8.405.1 WWE. Before that I successfully installed ROM version 1.7.707.3. I tried to install 5.4.405.1 but that didn't work. Am I supposed to install the updates in order of their release?
The order shouldn't matter. But, now I'm concerned -- because 5.4.405.1..etc is precisely the way to upgrdade to wm6 (since it has the 2.79 radio rom).
How did that update fail? Did you try updating after first unlocking your phone, or did your failure happen before you unlocked?
it gives me this after i try to upgrade: ERROR [300] : INVALID UPDATE TOOL
I've tried the steps you outlined above against several different roms... I get "invalid command" at 2% every time.
How frustrating... I'm guessing the steps IMEIcheck provided to update the 'updater' don't work with roms newer than a certain version.
Can you ask your contact there if they can provide updated steps which work with newer roms?
Seriously... i just paid like 40 bucks to unlock my phone.
I was _already_ running an english rom after flashing using aserg's way (an older htc wwe release), so I'm failing to see any advantage to having cid unlocked my phone.
I don't want to give up... I've already spent contless hours trying to figure out how to get past every minor error...
i'm in the same boat as you dude. this rom worked for me, but again, its version 1.8.405.1. None of the newer ones work. I just emailed my contact and i guess we can only wait and see what he can come up with. Another thing, have you enabled wifi on your device? I have a wifi button on my Comm Manager but when I tap it it tries to launch but then nothing happens. I read about a registry edit to fix this but my registry was different.
hi i recently came across the new RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE rom which is the europe unbranded mango rom i successfully flashed my o2 uk rom to this update without using any of the hspl flashing techniques so this way will remain updateable even through zune so here goes
Step 1- download this rom http://www39.multiupload.com:81/fil..._5.52.09.16_22.33a.50.10U_Signed_by_ansar.zip
Step 2- extract this rom 2 a folder and name it something like update part 1
Step 3-download this file http://api.viglink.com/api/click?fo.../ModelID.fig&jsonp=vglnk_jsonp_13155707623901
Step 4- download this mango rom http://api.viglink.com/api/click?fo..._RELEASE.exe&jsonp=vglnk_jsonp_13155708495051
Step 5 extract the rom you downloaded in step 4 to a folder named update part 2 then drag the modeid file you downloaded in step 3 into your update part 2 folder
Step 6 flash your phone using the romupdateutility exe file in your 1st update folder at the end of this u will receive an error 270 dont panic as this is supposed to happen
Step 7 now time to flash again go to your update part 2 folder this time and click on the romupdateutility exe file and allow it to flash at the end of this you will have a fully unbranded mango 2 rom on your phone with all the updated radios
would also like to think ansar and petbede as parts of there discoveries was used in this guide hope this helps
Trying now, it worked for me to go to NoDo thnks to Petbed. I tried the oter methods to get Mango Final on mine by kept saying invalid vender ID so here goes....
Yes seems to work this way tx...daryld
no probs swanny78 glad i could help
daryld said:
no probs swanny78 glad i could help
Click to expand...
Click to collapse
Great Guide Daryld, Just thought id point out that anyone who is happy to have the HSPL can download DFT's new 7720 build, it is completely unbranded (have an O2 HD7 myself)
Great and simple way to also unbrand your phone
hi guys! quick question - the 2nd one is an application, so where does it extract to? I cant find a way - unless I need a rom extraction utility?
hi jragar if you have winrar just right clight on it and click open wif winrar it will show you all the files then drag them 2 a new folder hope this helps
daryld said:
hi jragar if you have winrar just right clight on it and click open wif winrar it will show you all the files then drag them 2 a new folder hope this helps
Click to expand...
Click to collapse
you learn something new everyday - brilliant mate, never knew about winrar opening exes!
how strange, now I get device not found error 260.
May try rebooting laptop
r u sure u r putting ur phone in bootloader mode u need to do this before flashing and u can do this by turning ur phone completely off then holding the the volume down button only while pressing the power button on u shud see a tricolour screen then when you go to flash it should recognise ur phone let me know if this helps
There may be a misunderstanding occurred.
Try to rename filename and extension from "ModelID.fig" to "ModelID.bmp" (quote not include).
You will see a real file of ModelID.fig..
It's just image not hardware id.
The real hardware id was specific into the Rom in the offset 0x0220.
Quite painless and looks good - installed no issues so far.
does this method require y device to be unlocked ?
I guess doing this way you lose all your side-loaded apps including chevron unlock?
Future Updates?
Does this allow standard updating via Zune? Or will we have to put on the original mango carrier roms when and if they become available?
I followed this and it worked a treat top post
only problem I have is some of my app purchases seem to be lost.....e.g. I paid for PES2011 and now it shows up with the BUY which I am reluctant to click in case I pay twice....any ideas?
I can't find the Modeid file?
When I open up the file in step 3 the files in there are as follows:
RomUpdateutility.exe
Enterbootloader.exe
RUUgetinfo.exe
Rapitool.exe
RUUresource.dll
Readme.doc
RUU_signed.nbh
SPL_Signed.nbh
Enterusb.fig
Enterbattery.fg
Romupdateutlity.cfg
Thanks
EDIT: Sorry ignore my post, about 10 seconds after posting my computer decided to work so got it now thanks
WasStoNed said:
I followed this and it worked a treat top post
only problem I have is some of my app purchases seem to be lost.....e.g. I paid for PES2011 and now it shows up with the BUY which I am reluctant to click in case I pay twice....any ideas?
Click to expand...
Click to collapse
Its fine just click buy and it says its already purchased and then download. The real pain is as you would expect flashing the rom you wont have any saved games but its a small price to pay. Your xbox achievements remain
bing voice stopped working
Guys I now have an issue using Bing voice and speaking and out loud. Keeps saying server not available right now...or words to that effect. Any ideas?
Yeah having the same issue here