First of all hiya everybody. I'm new in this forum(found it via a Greek forum). I have a Qtek S200 and I'm having the following problem. I have made my device to ask for a password if its being open but unused for more than 12 hours. When I tried to enter my password it wouldn't accept it. I tried to flash the rom but again no luck because every time that I try to establish a connection between my pc and the s200 the activesync asks for the password... Does anyone has any suggestions on what can I do to fix it?
Thanx,
Stradale13
EDIT --> Problem solved!
Could you help me please I alredy flash my mda but it sim lock and " data crashes contact service " CID unlock finish after search in here found http://forum.xda-developers.com/showthread.php?t=307558 by mestrini
but unluckey my device ID KEY is 80 not in that list who has CID KEY 80 back up please help my MDA also rom t-mobile 1.08.10.2 US where can i find couse more than 2 week ago that i carry my DEAR
MDA all the time but can't use in phone mode.... i still love my MDA lease help [email protected]
sorry...disregard my post
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Your Qtek wait a new installation of ROM, re-install the original rom completely (See Universal Wiki from this site).
After this unlock completely your UNI (See the Wiki too). Execute ALL the procedure (don't forget steps). Upgrade of bootloader is not necessary in some cases.
Install the new ROM...
Your device is not briked yet, but in bootloader mode if your battery is low, you can't recharge it...
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
hope you!
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
If successed, you can go on to upgrade.
I am not sure it will be work ,but in my Exec , it can work!
i did this on my mda pro, basically you just need to connect the usb cable (to phone and computer)
the serial will change to usb then you can reflash.
Please help me
I forgot my password type (HTC Touch P3450 (HTC Elf 100
Hardreset and tested but there is no response back and show the password screen as the solution
after upgrading my spl 1 in htc hermes (i mate jasjam) to spl 2.1 then install wm 6.1 the wifi is not working.
I can't turn on wifi. When I touch in switch it do not on. I already made several hard resets and this does not result.
some one solve that problem in this Thread:
http://forum.xda-developers.com/show...490681&page=34
****ok finaly it's all ok
i have read an eeprom good
so here the solution
load in your trinity olipro1.30
open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)
at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00
save file
now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000
reset
and enjoy****
but the problem that this thread for htc trinity and i have imate jasjam
i have maked the same step and when want to convert the "nb" file in mtty i write this command:
lnb trin100.nb 500a0000 400
mtty told me:
unkonwn cmd command!!
some one asked the same qusition and they told him:"you have had olipro1.30 in your mobile" and i can not find olipro1.30 for jasjam
pleas i need your help!!!!!