I have some problems with my external speaker.
With my headset I hear some sound but not with my external speaker.
This is not my first time with this problem. Then I had put my headset in de MDA and then put it out and then my external speaker works.
But now it unfortunately works this methode.
I have also did a hard-rest, but unfortunately it doesn't works.
Is there somebody with a solution? :?
He works! Thanks to the paper clip! 8)
Related
when connected as handsfree device, my bluetrek G2 works fine, except that the micro seem disabled.
what is very curious is that the micro and speaker of the XDA2 are still active... does anybody see this anywhere?
I tested the G2 on a S100, and there everythink is fine... that's curious !
well... it seems nobody have a problem with his bluetooth headset ?
Hi guys !
I tried to check the forum for this problem but I only could find something scarcely useful.
My Qtek 2020 has the microphone which seems to be completely dead during a phone call. The recorder works fine, as well as the speaker. I can only get a regular operation with a BT headset. The external (wired) headphone is still dead but only regarding the microphone.
I' ve been reading some posts about the phone connector: do you think I should open the phone and check for that or what else ?
Any suggestion is greatly appreciated.
Thanks everybody in advance. Oberdorfer.
dead mic in phone mode
Yes, I have XDAII, I have exactly the same problem as oberdorfer.
The mic is working fine in recorder. But not in phone mode.
I have tried replacing the mic, but no luck.
I tried searching thru the forum, but nothing. Anyone can help?
For some reason connecting any wired headset, even the original one does not enable the microphone on the headset. The mic on the phone is still active, so I put the phone in my pocket and no one can hear me..Can't seem to find any posts or info on the topic. Anybody have any ideas?
Thanks
Im a bit late but I have a similar problem: Wehn I pick up the phone by pressing the button on the headset the micro is not on. However when I dis- and reconnect the headset it suddenly does work. I use Farias final crossbow rom. What can be done to fix this problem?
I'm using a Radioshack adapter that allows me to plug in a cassette adapter in my car directly to my 8125. Works awesome- even leaves the internal microphone working so that when I call out it works as a speakerphone through my radio. COOL~!
PROBLEM: the mike does not work on an INCOMING CALL??!?!??!? In other wrods, when I answer the phone, I can hear the caller but they can't hear me. This is not a problem if I call out...
This is driving me crazy! Anyone know the answer?
Hi guys.
I've firstly a problem with usb C connector wich the phone not working in storage mode i've changed it and now i don't have principal microphone on call only on speaker it work's.
Anyone know what's the problem ?
Can i change on software maybe just using one of them ?
Thanks all
Like what's the problem? You use headset to talk, because internal mic doesn't work at all?
If that's the point, then mic was damaged during repair