Database Users

ActiveSync over Widcomm Stack

I have the widcomm Bluetooth stack installed and i am very happy with it, i am able to network with my pc and to the internet and everything even use activesunc over BT LAN, but what i couldn't do so far is to get active sync working over the Widcomm Active Sync profile, i don't really need it but it is just that i was able to get it working on MS BT stack, anyone had more luck than me on that one?
P.S. Active Sync starts connecting then pops up an error that the device is not recognized or not a pocket pc or smart phone.
Regards

I have the same problem, activesync doesn't work anymore after install widcomm bt stack even if i disable it and run ms bluetooth stack. I suppose that there is problem in registry for activesync, it propably call post which is not exists because widcomm stack replaced it. I think that solution could be to extract registry from ipag and compare it for activesync keys.
Adam

Anyone managed to ActiveSync via the Widcomm stack???
It does not work for me either

I have tried to install widcomm in the Qtek2020 but always it says "error" to me. What version of widcomm you have? Where I can find it? Thanks.

bluetooth headset doesn't work with o2 xda2

hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me

Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit

Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.

:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)

Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:

I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?

ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.

bluetrek s2 troubles (bluetooth stack)

Hey guys,
I just upgraded to radio stack 1.21. I still have bluetooth problems.
I've been reading up on this forums, and it seems that people all over are complaining about the bluetooth stack.
Basically, i can only get the 'connectected headset' icon, if i pair the headset again (removing it from the devices list).
It seems rediculous that it won't reconnect as soon as I turn on my bluetrek!
Is there someone with some experience that knows the proper procedure to connect easily??
Many thanks!

funny but I seem to have a similar problem only I am using Rom Version 1.01.00 wwe - radio version 1.00.10
Pairing my BT headset works perfect, the BT headset works great, all is fine until at some point - usually after a soft reset - the BT icon disappears and does not come back even if I click on the connect button on my BT headset.
The only way to bring my BT headset to life with the MDA is to delete the headset from the BT menu and rediscover it and repair it...
This of course is extremely annoying.
Anyone? any solution?

Widcomm Desktop MS Bluetooth

I hope one of the gurus here can help me with this one:
- I have the O2 Exec, with MS BT stack
- I have the Logitech MX 5000 BT Laser Desktop (http://www.logitech.com/index.cfm/products/details/CA/EN,CRID=2158,CONTENTID=10776)
- this comes with a choice of the Widcomm stack(which they recommend), or you can use the MS BT stack
I have set up BT Activesync using the MS BT stack, without a hitch, but would like the extra goodies that the Widcomm stack offers.
What I want to know is:
- can I use the Logitech Widcomm stack (which requires that I disable the MS BT stack on my pc) and still set up Activesync with my Exec?
- Or, because the Exec uses MS BT, must I set up all peripherals to use MS BT to get them to communicate?
I have checked Logitech's support forum and done an extensive search here, but I can't find a definitive answer:
- if your HTC devices uses a particular BT stack, must you use that stack on your pc , as well?
Thanks in advance...

Huisie, you *should* be able to use any bluetooth stack on the desktop.
Just ansure that you have a incoming BT port set up, point Activesync to that incoming port, and set up a partnership.

Lekker, ou seun, dankie vir die help daarmee!
So, snorbaard, I can run the Widcomm or MS BT stack on the desktop, but I'm limited to the ...uh, limited...MS BT on the Exec.
Still, I believe that Widcomm doesn't do hands-free, is that right?

Switch Display off with MS BT Stack

hi, for GPS purposes, i need to switch the display off while leaving the device on working, but apparantly the MS BT stack on my xda mini doesnt allow this... it always switches the screen back on. Using a blusoleil stack, this problem is fixed. but the bluesoleil stack isnt as stable and handy as the builtin MS stack.
is there a way to disable that "keep screen alive" of the MS BT stack in the registry or something?
or is there an upgrade or fix to this?
thanks in advance,
mic
EDIT: okay i found it myself, sorry for bugging. it actually is possible, if anyone else wonders how, this is what you have to change:
Goto HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SerialPort and set OBWakeUpByInData to 0 for Outbound Connection (like Bluetooth GPS) and IBWakeUpByData for incoming connections (whatever else)