Database Users

I figured out T-Mobile MMS Problem. Here r correct setttings

After weeks of trying to figure this out here are the correct settings!!
1 Under My Work Network, select (Add a new modem connection)
2 Enter a name for your connection; I used (MMS)
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labeled (Access point name) type in wap.voicestream.com
6 Tap Next
7 Leave the User name, Password, and Domain fields blank
8 Tap Finish
9 Tap the Proxy Settings tab
10 Place a check in both boxes
11 Leave (Proxy server) blank
12 Tap Advanced
13 Leave HTTP and Socks Server fields blank.
14 Enter 216.155.165.050 for your WAP server. Port # is 9201
15 Enter 216.155.165.050 for your Secure WAP server. Port # is 9201
16 Tap OK twice
Now go to your MMS program and set it up, create a new server and I called mine T-Zones. Here are those settings.
Server Name: T-Zones
Gateway: 216.155.165.050
Server Address: http://216.155.174.84/servlets/mms
Tap ok
Now go to preferences and enter these settings,
Connect Via: My Work Network
Connect to Server: T-Zones
(check the box to retrieve messages immediately)
And it should work.
Enjoy!

Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.

Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!

mlynch01 said:
Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!
Click to expand...
Click to collapse
You got PM, get back with me if you can! :lol:

Can;t seem to get this to work, did you do anything different with your GPRS settings?
I setup everything as stated, but it never is able to download or send messages, although it does download the subject.
G

well now i have 2 connections called "gprs" when i tap the connect icon in the top bar.
can i delete my original one and use this MMS one always (for sending MMS, for web browsing, etc etc)?
thanks,
arebelspy

bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy

arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH

Re: I figured out T-Mobile MMS Problem. Here r correct settt
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!

Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.

Re: I figured out T-Mobile MMS Problem. Here r correct settt
Merc said:
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!
Click to expand...
Click to collapse
Merc, I am glad I could be of some help.

I am using the built in MMS prog. on the iMate.
I have MMS enabled on my account, I can receive the message header
but I can never download, sending seems to work, but they never get delivered.
Any ideas?
Guardian

mlynch01 said:
Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.
Click to expand...
Click to collapse
I'm using the i-mate on t-mobile with the default program built in as well.
I don't see "Sender address type:" or "Sender address".. where is this and what should it be set to?
-arebelspy

Sender address should be set to Phone Number and Sender address should be your 10 digit mobile number. So check these settings where ever they maybe.
HTH

[SOLVED] MMS-Settings

Hello together,
I bought my QTEK9100 some weeks ago and everything works fine (after ROM-Update)... instead of MMS.
I use the german ePlus-Settings and GPRS works fine. But I may enter the wrong MMS-Settings, because I cannot send or receive any MMS.
Can anyone help me?

Could you be so kind and share the settings you have entered for GPRS on your Qtek? I haven't been able to get it to work on my MDA II.
Thanks

i also want to know how to set up mms. :roll:

Triband81 said:
Could you be so kind and share the settings you have entered for GPRS on your Qtek? I haven't been able to get it to work on my MDA II.
Thanks
Click to expand...
Click to collapse
Sorry, I'm on travel at the moment. When I'm back, I'll post the GPRS-Settings.

Klingt gut, vielen Dank im voraus.
Sounds great, thanks in advance.

Ok, here are the settings to configure GPRS on Windows Mobile 5 (used settings are for ePlus Germany).
I have a german device, so i have to translate manually. Original names and descriptions may be different:
1. Open start menu, then choose "Settings" -> "Connections"
2. Open "Connections"
3. Go to the Tab "Advanced" and click on "choose networks"
4. On the next screen, you'll see 2 connection settings. Click on the upper "New"-button
5. Enter a name for your new connection (e.g. GPRS)
6. Open the "Modem"-tab
7. In the "Modem"-tab click on "New"
8. On the next screen enter a name for the new connection (e.g. GPRS Internet) and choose "Cellular Line (GPRS)", click on "Next"
9. Enter your accesspoint (e.g. internet.eplus.de), click on "Next"
10. Enter username and password for xour connection (e.g. Username: eplus, Password: eplus)
11. Click on Advanced and check, if "Use server-assigned IP address" is activated in both tabs
12. Click on "Ok" until you are in the screen, described in step 4
13. To use your GPRS-Connection to connect to the internet, you'll have to choose it in the upper connection setting.
14. Open Pocket Internet Explorer and enter any URL (e.g. http://wap.google.com).
15. Your device will now connect to the internet via GPRS and display the requested page.

Thanks a lot for the help, you could have written in German as well. I speak both fluently .
I will give them a try and see how it works for me on BASE. I'll post some feedback as well.

this is an english-speaking forum, so other languages are not really welcome. By the way; i tried to set up mms for mny operator with the same method and it does not work.
Triband81 said:
Thanks a lot for the help, you could have written in German as well. I speak both fluently .
I will give them a try and see how it works for me on BASE. I'll post some feedback as well.
Click to expand...
Click to collapse

Hi,
Well i don't know whether it may be of any help, but i was facing the same problem here in india. Then i tried some thing and it worked for me...
U can see that in my post http://forum.xda-developers.com/viewtopic.php?t=49334&highlight=
i believe the only thing u'll need to chnage is the DNS from 100.1.201.172 to whatever gateway address ur service provider must have given u for MMS.
Please let me know if it works or if u need any more help.

dimushor said:
this is an english-speaking forum, so other languages are not really welcome. By the way; i tried to set up mms for mny operator with the same method and it does not work.
Click to expand...
Click to collapse
I'm quite aware of that and I won't disagree with you on that point. If I would have posted in German, I would've posted a translation as well. Anyway, it seems like getting MMS to work on most PPCs is a major task which takes some educated guessing.

Try this
As described above
1. Open start menu, then choose "Settings" -> "Connections"
2. Open "Connections"
3. Go to the Tab "Advanced" and click on "choose networks"
4. On the next screen, you'll see 2 connection settings. Click on the upper "New"-button
5. Enter a name for your new connection (e.g. GPRS)
6. Open the "Modem"-tab
7. In the "Modem"-tab click on "New"
8. On the next screen enter a name for the new connection (MMS) and choose "Cellular Line (GPRS)", click on "Next"
9. Enter your accesspoint (mms.eplus.de), click on "Next"
10. Enter username and password for your connection (e.g. Username: eplus, Password: wap)
11. Click on Advanced and check, if "Use server-assigned IP address" is activated in both tabs
then
12: Tap OK and x to close everything
13: Open the messaging application
14: Press the menu softkey
15: Select MMS Configuration
16: Tap the servers tab
17: Tap New
18 Enter the following details:
server name: - E-plus
Gateway: 212.023.097.153
Port Number: 9201
server address: http://mms/eplus.de
Connect via: (here, select the connection created above)
Size : (go for the biggest and bring it down later if it fails.)
Wap Version: 2.0 should work on all modern networks.
19: Tap ok
20: Tap Set as default
that should do it. As I'm here in the UK, i am going by the settings over at modaco.com for eplus, so check those with your provider.
Should work for you!

Triband81 said:
I'm quite aware of that and I won't disagree with you on that point. If I would have posted in German, I would've posted a translation as well. Anyway, it seems like getting MMS to work on most PPCs is a major task which takes some educated guessing.
Click to expand...
Click to collapse
I wasx joking bz the way. :lol:

does anyone know how to increase the sending size limit for the mms composer? on my dropdown it only shows 100K [no other choices]
--
edit: have found the solution
HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"SendCount"-> Setting how Many "Sending Size limitations" listed in DropDown Listed ..
"SendDefault"=dword:00019000 -> Setting the Default Send Limitation
"SendLimit1"=dword:0000C800 -> Send Limit one can be change ex. 50K=dword:0000C800
"SendLimit2"=dword:00019000 -> Send Limit two can be change ex. 100K=dword:00019000
"SendLimit3"=dword:0003E800 -> Send Limit three can be change ex. 250K=dword:00003E800
Click to expand...
Click to collapse
just change SendCount from 1 to 3...

dimushor said:
I wasx joking bz the way. :lol:
Click to expand...
Click to collapse
Lol it's hard to tell in an online environment whether someone is joking or not
I got the GPRS connection to work so thanks to bmueller for posting clear and detailed steps to get it to work

I GOT IT!!!
Hey guys. Thanks for all your help.
Now I fixed it. 8)
All settings were correct, except the port.
The port 9201 didn't work, so I tried the port :!: :!: :!: 5080 :!: :!: :!: for Nokia-mobiles today.
Now I can send and receive any MMS-Message.
@Triband: I'm sure, you know german, but as this is an english forum and some other users could have your problem, too, I decided to write the HowTo in english.

Thanks for the port hint, I'll have to see if I can get this to work as well. I wasn't able to locate the port option under the MMS Server setup on WM2003SE. But the GPRS part works great .

Why can't i send or recieve MMS messages on 3..???

the apn i am using is three.co.uk and the rom is Black Majik 6.. i can send SMS messages but i can't send MMS messages...
Anybody have any ideas....???
i have a SPV M3100
Windows Mobile 6
smokey_jnr

Try this thread:
http://forum.xda-developers.com/showthread.php?t=299023http://forum.xda-developers.com/showthread.php?t=299023&highlight=provider+3+settings
Hopefully the settings for 3 will be there for you.

I use mine on 3, here are my MMS settings that work:
Server Name: 3 MMS
Gateway: 217.171.129.2
Port Number: 9201
Server address: http://mms.um.three.co.uk:10021/mmsc
Connect via: 3 MMS
Hopefully that works for you!

mark4130 said:
I use mine on 3, here are my MMS settings that work:
Server Name: 3 MMS
Gateway: 217.171.129.2
Port Number: 9201
Server address: http://mms.um.three.co.uk:10021/mmsc
Connect via: 3 MMS
Hopefully that works for you!
Click to expand...
Click to collapse
Hi Mark,
thanks for that, but where do i go to put these settings in..???

i have my SPV M3100 on O2 and had to do this to mine
Start
Settings
Connections
Connections
then from there you can add in your settings

Start a new MMS, click on:
Menu
Options
MMS Options
Click on the Servers tab at the bottom - if you have one in the box for 3, click on that and it will open. Put the details in the relevant boxes.
If you dont have one for 3, click on New and enter the details. Once you have entered and saved, select it as your default.
Mark

oh yea sorry mine was the web connections part

mark4130 said:
Start a new MMS, click on:
Menu
Options
MMS Options
Click on the Servers tab at the bottom - if you have one in the box for 3, click on that and it will open. Put the details in the relevant boxes.
If you dont have one for 3, click on New and enter the details. Once you have entered and saved, select it as your default.
Mark
Click to expand...
Click to collapse
Hi mark,
do you know how to setup voicemail, evertime i try the quick dial its says the number is not stored. when i go into settings it then won't read the settings of the network..
do you knw why, or how i can assign the voicemail number...???
ta,
smokey_jnr

I couldnt get it to go into the speed dial for "1" so i have put it in the speed dial for button "2".
Firstly, make sure you have the 3 voicemail number in your contacts list (+44123).
Press the green call button, press menu, select speed dial.
"1" should be highlighted with the name "Voicemail" next to it - press menu, press "New". The contacts screen will open, select the contact you have saved for voice mail, it will open the speed dial screen and show that it is assigning it to the next available speed dial number. You can rename this to "Voicemail" if you havent saved the contact under that name, press OK and you are done

MMS too small

A few months ago I downloaded a CAB that changed the mms size to the original size, do anyone have it? I have the Wing phone.

09151821 said:
A few months ago I downloaded a CAB that changed the mms size to the original size, do anyone have it? I have the Wing phone.
Click to expand...
Click to collapse
HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
change key : wap2sendlimit1 to 1228800 (1.2M)
HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
change key : sendlimit3 to 1228800 (1.2M)
Then change the settings in MMS . Start > Messaging > Menu > MMS Options > Servers > T-mobile MMS (which is my carrier, if different pick your carrier) . Now goto Send Limit and change the value to 1200K. Click done and you are done.
10. Tap Done.
11. Scroll to T-Mobile MMS if it is not selected.
12. Tap Set As Default.
13. Tap ok.
* The new message screen appears.
14. Send a message to your own mobile number to test your settings.

[Q] Can't get 3G to work.

Hey XDA,
I'm running darkstone SuperRAM FroYo v1.5 on my phone and so far I love it.
There's only one problem, I can't get my 3G to work.
After looking around for a bit I noticed a few other dutch people having the same problem.
I've already tried this:
Guide to enable 3G data connection on Android HTC HD2
Click on ‘Windows hardware button’ at main screen.
Go to ‘Settings’.
Select ‘Wireless & networks’
Check ‘Mobile network ~ Use phone for data connection when WiFi is unavailable’.
Select ”Mobile network ~ Set options for roaming, networks, APNs’.
Select ‘Access Point Names’. Note – A blank APNs page will be shown.
Click on ‘Windows hardware button’. It will bring up 2 options ~ ‘New APN’ and ‘Reset to default’.
Select ‘New APN’.
Key in ‘My APN’ by clicking on ‘Name’. Note – you can key in any name you want. I selected ‘My APN’.
Key in ‘My APN’ by clicking on ‘APN’. Note – you can key in any APN you want. I selected ‘My APN’.
Click on ‘Windows hardware button’.
Then click on ‘Save’.
Select on ‘My APN’.
You are done.
But no luck, anyone else know a fix?
Thnx in advance
Dedzo0n

dedzo0n said:
Key in ‘My APN’ by clicking on ‘Name’. Note – you can key in any name you want. I selected ‘My APN’.
Key in ‘My APN’ by clicking on ‘APN’. Note – you can key in any APN you want. I selected ‘My APN’.
Click to expand...
Click to collapse
the name, as you said can be anything, but shouldnt APN be the address of the APN?
for example, mine, O2 uk, is
APN name - anything
APN - mobile.o2.co.uk (or wap.o2.co.uk - depends which apn im setting up)

I've done it with the correct settings and all, it just wont work.
APN: live.vodafone.com of office.vodafone.nl
Proxy:
Port:
Username: vodafone
Password: vodafone
Server:
MMSC: http: (dashdash)mmsc.mms.vodafone.nl
MMS proxy: 192.168.251.150
MMS port: 8799
Mms-protocol: WAP 2.0
MCC: 204
MNC: 04
Anyone else?

Bringing
Up
My
Post

Does it show anything in the connection bar? E H etc?

pburstrom said:
Does it show anything in the connection bar? E H etc?
Click to expand...
Click to collapse
Yes, it does say 3G and one of the arrows lights up when I attempt to load a webpage, but it just won't load the page. I get an error the first time I try to load a page, after that it just tries to load it.

Drop 3G as well
Mine's worst,
Tmobile USA, check the APN setting and everything correct.
Was working yesterday and all of sudden no more 3G signal
White out, and it says limited service
can someone chime in?

To the both of you: do you have a data capable subscription? If you don't have it, then it won't work. Otherwise if its capable, your provider should activate it. You can always setting up the APN's and save. Then turn off your device for about 10 minutes and switch it back on

Give a try changing kernels.

xabhi said:
Give a try changing kernels.
Click to expand...
Click to collapse
This could work too

Sorry, kernels? (A)

dedzo0n said:
Hey XDA,
I'm running darkstone SuperRAM FroYo v1.5 on my phone and so far I love it.
There's only one problem, I can't get my 3G to work.
After looking around for a bit I noticed a few other dutch people having the same problem.
I've already tried this:
Guide to enable 3G data connection on Android HTC HD2
Click on ‘Windows hardware button’ at main screen.
Go to ‘Settings’.
Select ‘Wireless & networks’
Check ‘Mobile network ~ Use phone for data connection when WiFi is unavailable’.
Select ”Mobile network ~ Set options for roaming, networks, APNs’.
Select ‘Access Point Names’. Note – A blank APNs page will be shown.
Click on ‘Windows hardware button’. It will bring up 2 options ~ ‘New APN’ and ‘Reset to default’.
Select ‘New APN’.
Key in ‘My APN’ by clicking on ‘Name’. Note – you can key in any name you want. I selected ‘My APN’.
Key in ‘My APN’ by clicking on ‘APN’. Note – you can key in any APN you want. I selected ‘My APN’.
Click on ‘Windows hardware button’.
Then click on ‘Save’.
Select on ‘My APN’.
You are done.
But no luck, anyone else know a fix?
Thnx in advance
Dedzo0n
Click to expand...
Click to collapse
Try these settings in the txt file, these or from Vodafone web site, could be something simple

dedzo0n said:
Yes, it does say 3G and one of the arrows lights up when I attempt to load a webpage, but it just won't load the page. I get an error the first time I try to load a page, after that it just tries to load it.
Click to expand...
Click to collapse
what is that error?
data drop? or need a connection to a network or wifi?

dedzo0n said:
I've done it with the correct settings and all, it just wont work.
APN: live.vodafone.com of office.vodafone.nl
Proxy:
Port:
Username: vodafone
Password: vodafone
Server:
MMSC: http: (dashdash)mmsc.mms.vodafone.nl
MMS proxy: 192.168.251.150
MMS port: 8799
Mms-protocol: WAP 2.0
MCC: 204
MNC: 04
Anyone else?
Click to expand...
Click to collapse
how about APN type? what did you put for that?
If its a joint data and mms APN, it should say * , or 'default,supl,mms' (without '')
If its an mms only APN, then set APN type to mms
ALso, when you see the APN in the list, before you open its details, is the radio button to the right highlighted? cos if it isn't tap it and it will highlight, and you should find it starts to work.
(This radio button wont exist for APNs with APN type set to only mms)

carl1961 said:
what is that error?
data drop? or need a connection to a network or wifi?
Click to expand...
Click to collapse
Need a connection to a network or wifi.
samsamuel said:
how about APN type? what did you put for that?
If its a joint data and mms APN, it should say * , or 'default,supl,mms' (without '')
If its an mms only APN, then set APN type to mms
ALso, when you see the APN in the list, before you open its details, is the radio button to the right highlighted? cos if it isn't tap it and it will highlight, and you should find it starts to work.
(This radio button wont exist for APNs with APN type set to only mms)
Click to expand...
Click to collapse
It's set to 'default,supl,mms'.
The radio button is on
carl1961 said:
Try these settings in the txt file, these or from Vodafone web site, could be something simple
Click to expand...
Click to collapse
I got the settings from the dutch vodafone website, as I live in the netherlands I think I'll get billed if I use UK settings. (If it works).
I'm going to try to install a different version of android, see if that works